Humax PVR-9150T User Manual - Page 46

7. Record 7.3 HDD Control You can check the free space of the hard disk drive and format (erase) the disk drive if necessary. 1. Press the MENU button. 2. Select Record using the / button and press the OK or button. 3. Select HDD Control using the / button and press the OK or button. 4. You can check the free, used, reserved and total space of the HDD. 5. Select Format and press the OK button to remove all the recorded programmes saved on the HDD and initialise the HDD. 6. Select Yes when the format confirmation message appears and enter a password to start formatting the HDD. Note: A certain amount of space is reserved for TSR and PIP. Tip: The default password is 0000. If you have forgotten your password, please contact the Humax Customer Helpline. 7.4 Recording's Start/End Time You can set the start/end time of recording. 1. Press the MENU button. 2. Select Record using the / button and press the OK or button. 3. Select Recording's Start/End Time using the / button and press the OK or button. 4. Select the time using the / button and press the OK button. Note: Auto tracking, split and series reservation in the programme guide are enabled only when Recording's Start/End Time is set to On Time. GB45 User's Manual