Humax PVR-9150T User Manual - Page 55

10. Installation This chapter describes how to search for channels and other series of procedures. Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit from the menu screen. • You can easily select all menu items using the assigned number for each menu. 10.1 Automatic Search If your product is connected to the aerial and television, you can automatically search channels without entering any other information. 1. Press the MENU button. 2. Select Installation using the / button and press the OK or button. 3. Enter the password using the NUMERIC(0-9) buttons. 4. Select Automatic Search from installation menu using the / button and press the OK or button. 5. Automatic channel search begins. Tip: The default password is 0000. If you have forgotten your password, please contact your local product distributor. 1. Search Wait while channel search continues. This may take a few minutes. 1. While operating search, the cursor is located at Stop. Therefore, if you press the OK button during searching, the operation is stopped and the channels found until then will be displayed. 2. If search operation is successfully completed and the channel does not exist, press the OK button and try to reset the search operation again if necessary. 3. You can delete unnecessary channels from the searched channels. Select the channels to delete and press the OK button. Then select Delete and press the OK button. To delete all channels, select Select All to select all channels, select Delete and press the OK button. 4. When completing channel search and deleting unnecessary channels, select Save and press the OK button to save the changes. GB54 User's Manual