Humax PVR-9150T User Manual - Page 60

11. Software Update 2. Manual Update You can perform manual update using know MUX information. 1. Select Manual Update using the / button and press the OK or button. 2. Select Channel using the / button and press the OK or button. 3. Select the channel number using the / button and press the OK or button. 4. Select Frequency using the / button and press the OK or button. 5. Enter the frequency using the NUMERIC(0-9) buttons. 6. Select Search and press the OK button to search software. 7. Existing new software will show. If new software does not exist, press the OK button to return to the manual update menu. 8. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu. 9. Performs software update. Please wait until it is completed. 10. When completing the software update, the product is automatically powered off and on again. 3. Regular Auto Update and Search Time You can specify the regular auto update and search time. Regular auto update is started in standby mode. 1. Select Regular Auto Update using the / button and press the OK or button. 2. Select Enable/Disable and press the OK button to set or unset the search time automatically. 3. When selecting Enable, set Search Time using the NUMERIC(0-9) buttons and select OK and press the OK button. 4. If you wish to cancel the entered time, select Cancel and press the OK button. Note: Regular auto update will only work when if the product is in Standby at the time the Regular is set. GB59 User's Manual