Humax PVR-9400T User Manual
Humax PVR-9400T Manual
 |
View all Humax PVR-9400T manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax PVR-9400T manual content summary:
- Humax PVR-9400T | User Manual - Page 1
- Humax PVR-9400T | User Manual - Page 2
which may become defective due to misuse of the information contained in this manual. ** Trademarks VIACCESS™ is a trademark of France Telecom. CryptoWorks ( Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product - Humax PVR-9400T | User Manual - Page 3
instructions provided. For your safety, be aware of the following precautions. ** Warnings, Cautions and Notes Throughout the whole manual make the user aware of possible problems and information of any importance to No user serviceable parts inside. Refer servicing to qualified service personnel. - Humax PVR-9400T | User Manual - Page 4
similar surface. If you place the product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand, tripod, bracket or table from where it can fall. A falling product - Humax PVR-9400T | User Manual - Page 5
they can touch dangerous voltage points or damage parts. ** 13.REPLACEMENT of PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer, or those that have the same characteristics as the original part. Unauthorized substitution - Humax PVR-9400T | User Manual - Page 6
GB50 7.1 Displaying and Switching Channel List GB50 7.2 Changing Channel List Group GB51 7.3 Edit Channel Lists GB51 7.4 Edit Favourite Channels GB54 8. Programme Guide GB57 8.1 Viewing Programme Guide Information GB57 8.2 Finding a Programme GB59 8.3 Viewing Reserved Programme GB60 GB 5 - Humax PVR-9400T | User Manual - Page 7
Settings GB68 10. Installation GB70 10.1 Automatic Search GB70 10.2 Manual Search GB71 10.3 Default Setting GB72 10.4 Antenna Power GB73 11 15. Trouble Shooting GB83 15.1 Trouble Shooting GB83 15.2 Error Message GB85 16. Specification GB86 17. Glossary GB88 18. Service and Support GB90 - Humax PVR-9400T | User Manual - Page 8
- Humax PVR-9400T | User Manual - Page 9
1. Before Using the Product 1.2 Front Panel ** ** 1. STANDBY BUTTON Switches between operation and standby modes. ** 2. RECORD BUTTON Records programme. ** 3. STOP BUTTON Stops recording. ** 4. PLAY BUTTON Plays programme. ** 5. PAUSE BUTTON Pauses programme. ** 6. SOURCE BUTTON Selects the input - Humax PVR-9400T | User Manual - Page 10
to the CI module, a Smartcard is needed to decode the channels. 1. Open the right-hand flap on the front of the product. 2. Follow the instructions of the module and insert the Smartcard into the CI module. 3. Keep the CI module (with the Smartcard) horizontal. 4. Insert the CI module into the - Humax PVR-9400T | User Manual - Page 11
1. Before Using the Product 1.4 Rear Panel ** 1. ANTENNA IN Connects your aerial. ** 2. LOOP OUT Connects the product and the RF input on your TV or VCR using a RF (coaxial) cable. The default UHF channel is 36. Please refer to 9.5 UHF Tuning. ** 3. TV SCART Connects to a TV SCART cable. ** 4. VCR - Humax PVR-9400T | User Manual - Page 12
1. Before Using the Product 1.5 Remote Control ** GB 11 - Humax PVR-9400T | User Manual - Page 13
1. Before Using the Product 1. STANDBY Switches between operation and standby modes. ** 2. NUMERIC(0-9) BUTTONS Enters a TV/radio channel number or menu option number. ** 3. LIST Displays the channel list. ** 4. PLAYBACK CONTROL BUTTONS ** a. FAST REWIND Rewinds at high speed. Each time you press - Humax PVR-9400T | User Manual - Page 14
SKIP (YELLOW) Skips the programme ahead 30 seconds. ** t. ADD BOOKMARK (BLUE) Saves the current viewing position as a bookmark. ** 13.GUIDE Displays the programme guide. ** 14.OK Selects a menu or confirms the selected operation. Also, displays the channel list while watching a programme. ** 15.BACK - Humax PVR-9400T | User Manual - Page 15
for gaining optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Note: • If you encounter any problem when setting up the product, please contact your local product distributor. • If you connect to the TV using RF cable, you should set the UHF - Humax PVR-9400T | User Manual - Page 16
2. Setup 2. Connecting TV and VCR 1. Connect your aerial to the ANTENNA IN connection on the product. 2. Select the most appropriate procedure depending on the equipment you have. • Connect a SCART cable from the TV SCART on the product to a SACRT connection on the TV set. • Connect an RF (Coaxial) - Humax PVR-9400T | User Manual - Page 17
2. Setup 3. Connecting Audio System Select the most appropriate procedure for your convenience. • Connect one end of the AUDIO L, R to the rear of the product and the other end to a rear of the audio system. • Connect the optical S/PDIF terminal and Dolby Digital decoder to listen to higher quality - Humax PVR-9400T | User Manual - Page 18
2. Setup 2.2 Powering On 1. Switch your TV on. 2. Connect the power cord of the product to a wall outlet. ** 3. Turn on the power switch, located at the back left of the product. 4. Power on by pressing the STANDBY button on the remote control or the STANDBY button on the front of the product. GB 17 - Humax PVR-9400T | User Manual - Page 19
3. Installation Wizard 3. Installation Wizard When powering on the product for the first time after purchasing, the installation wizard will operate automatically. You can easily set-up using simple organisation and options and watch the broadcasting after completing the set-up procedure. You can - Humax PVR-9400T | User Manual - Page 20
3. Installation Wizard 3.3 Automatic Search Please wait until the channel search is complete. 1. During the channel search, the cursor is located at Stop. Therefore, if you press the OK button during the search, the search will stop and the channels found until then will be displayed. 2. If the - Humax PVR-9400T | User Manual - Page 21
3. Installation Wizard 3.4 Time Setting You can set the GMT offset for the current time. Press the OK or button. Select your GMT offset using the button and press the OK button. GMT is changed by from 30 minutes to 1 hour. ** Note: The current time is set automatically whenever GMT offset changes. - Humax PVR-9400T | User Manual - Page 22
between TV channels and radio channels. ** Note: ** You can switch channel using the channel list or programme guide. Please refer to Chapter 7. Channel List and 8. Programme Guide for more information. 4.2 Volume Control 1. Press the VOL+/ VOL- or button to adjust the audio volume. 2. Press - Humax PVR-9400T | User Manual - Page 23
4. Basic Operation 4.3 Teletext When the channel supports teletext, the teletext icon ( ) is displayed on the i-plate. To enter the teletext mode, press the TEXT button. 1. Using Teletext Menu 1. Press the MENU mode. - Humax PVR-9400T | User Manual - Page 24
4. Basic Operation 2. Viewing Teletext Page 1. Enter the page number using the NUMERIC(0-9) buttons to move to the page directly. 2. Press the button to move to the next page. 3. Press the button to move to the previous page. 4. Press the CH+/CHpage. button to move to previous/next 5. Press - Humax PVR-9400T | User Manual - Page 25
4. Basic Operation 4.4 Programme Information (i-plate) Programme information is always displayed for a certain period of time whenever you switch channels. You can view the programme information by pressing the i button while watching a programme. Press the EXIT button to hide the i-plate. 1. - Humax PVR-9400T | User Manual - Page 26
4. Basic Operation 7. Next programme information: Displayed if next programme information is provided. Press the button to display the next programme information. 8. Programme broadcasting time and progress bar: Displays programme playing time and progress bar. Note: If there is no programme - Humax PVR-9400T | User Manual - Page 27
4. Basic Operation ** 4.5 Option List You can view and confirm detailed information about the current channel and change the information if necessary. 1. Adding a Channel to Favourite Group You can add the current channel to favourite group immediately. Also, you can add channels to favourite - Humax PVR-9400T | User Manual - Page 28
4. Basic Operation 2. Subtitle If the current programme provides subtitle information, you can select the language for the subtitle. 1. Press the OPT+ button. 2. Select Subtitle using the button. button and press the OK or 3. Select the subtitle language using the button and press the OK - Humax PVR-9400T | User Manual - Page 29
4. Basic Operation 3. Soundtrack If the current programme is available in multiple audio languages, you can select the language that you wish to listen to. 1. Press the OPT+ button. 2. Select Soundtrack using the or button. button and press the OK 3. Select the audio language using the button - Humax PVR-9400T | User Manual - Page 30
4. Basic Operation 4. Locking/Unlocking a Channel You can lock or unlock the current channel while watching a programme. 1. Press the OPT+ button. 2. Select Lock/Unlock using the or button. button and press the OK 3. Select Lock option using the button. button and press the OK 4. Select - Humax PVR-9400T | User Manual - Page 31
5. PIP and Time Shifted Recording 5. PIP and Time Shifted Recording 5.1 Picture-in-Picture (PIP) Screen If you press the PIP button on the remote control while watching TV, you can watch two channels at the same time. The audio from the main screen will be outputted. Each time you press the PIP - Humax PVR-9400T | User Manual - Page 32
5. PIP and Time Shifted Recording 2. Moving the PIP Screen (Only for 1:6 PIP Screen) Use the MOVE PIP the PIP screen. button on the remote control to move the position of ** Each time you press the MOVE PIP following figure. button, the PIP screen moves in the order of , as displayed in the - Humax PVR-9400T | User Manual - Page 33
5. PIP and Time Shifted Recording 5.2 Time Shifted Recording (TSR) You can perform TSR (Time Shifted Recording) and other functions similar to VCR functions using the playback control buttons while playing a programme. The product automatically saves the programme in the embedded hard disk drive - Humax PVR-9400T | User Manual - Page 34
5. PIP and Time Shifted Recording 3. Fast Rewind to Previous Scene Press the FAST REWIND button on the remote control to watch the scene passed by. Each time you press the FAST REWIND button, the rewind speed increases. ( x 2, x 4, x 16, x 64) ** If you press the PLAY button, the fast rewind - Humax PVR-9400T | User Manual - Page 35
5. PIP and Time Shifted Recording 6. Additional Time Shift Operations You can perform additional time shift operations using the following buttons on the remote control. ** Direct Jump Press the PLAY button while watching TV. If you press the button, a moving arrow will appear in the progress - Humax PVR-9400T | User Manual - Page 36
5. PIP and Time Shifted Recording Repeat Mode You can select a specific block within a recorded programme and play it back repeatedly. Press the A-B button to set the first repeating position. Select the second position using the button and press the A-B button. Then the programme plays back the - Humax PVR-9400T | User Manual - Page 37
6. Recording and Playback 6. Recording and Playback Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR. 6.1 Instant Recording Press the RECORD button on the remote control to record the current programme instantly. You can select the - Humax PVR-9400T | User Manual - Page 38
display the reserved recording list on the screen. ** Note: You can schedule recording easily using the programme guide. Refer to Chapter 8. Programme Guide. 1. Selecting/Unselecting Reserved Programmes 1. Select a programme and press the GREEN button. You can select multiple programmes. 2. To - Humax PVR-9400T | User Manual - Page 39
6. Recording and Playback 3. Adding a Reservation 1. Press the YELLOW button to add a new reservation. 2. Select Channel and Date. Press the button to display channel and date lists and select one item using the button and OK button. You can also select a channel using the NUMERIC(0-9) - Humax PVR-9400T | User Manual - Page 40
6. Recording and Playback 4. Sorting by Time/Name Each time you press the BLUE button, the sorting order of the reserved programmes change in the following sequence: by descending time, by ascending time, by name. 5. Editing a Reserved Programme 1. Select a programme you want to edit and press the - Humax PVR-9400T | User Manual - Page 41
6. Recording and Playback 6.3 Programme Playback in the Play List You can playback the recorded programme by pressing the PLAY LIST (TV), AUDIO (radio) and Selected Files list using the button. button. You can switch among VIDEO 1. VIDEO/AUDIO List 1. Select VIDEO/AUDIO list using the button. - Humax PVR-9400T | User Manual - Page 42
6. Recording and Playback 6.4 Chase Play You can watch the programme from the beginning as the rest of the programme is simultaneously being recorded. While recording two channels simultaneously, you can perform TSR (Time Shifted Recording) using the playback control buttons. ** Note: You can - Humax PVR-9400T | User Manual - Page 43
6. Recording and Playback 3. Editing the Recorded Programme 1. Select a programme and press the YELLOW button to edit the recorded programme. 2. A pop-up will appear. Select Edit and press the OK button. 3. You can edit the recorded programme using the following functions. ** Note: You can edit - Humax PVR-9400T | User Manual - Page 44
6. Recording and Playback Split You can split the recorded programme into separate recordings. Select the point you want to split using the RECORD button. button and press the Press the STOP button. A pop-up will appear. Select Yes and press the OK button to split the selected point. 4. - Humax PVR-9400T | User Manual - Page 45
6. Recording and Playback 5. Sorting by Time/Name Each time you press the BLUE button, the sorting order of the recorded programmes change in the following sequence: by descending time, by ascending time, by name. 6. Playing Recorded Programmes 1. Select programmes you want to playback and press - Humax PVR-9400T | User Manual - Page 46
6. Recording and Playback 6.6 MP3 You can enjoy the music or edit the MP3 list in Menu-Record-MP3. 1. Press the MENU button. 2. Select Record using the button. button and press the OK or 3. Select MP3 using the button and press the OK or button. The MP3 list appears. 1. Playing MP3 Select - Humax PVR-9400T | User Manual - Page 47
6. Recording and Playback 6.7 Digital Album You can view or edit the photos in Menu-Record-Digital Album. 1. Press the MENU button. 2. Select Record using the button. button and press the OK or 3. Select Digital Album using the button and press the OK or button. The digital album list - Humax PVR-9400T | User Manual - Page 48
6. Recording and Playback 6.8 HDD Control You can check the free space of the hard disk drive and format (erase) the disk drive if necessary. 1. Press the MENU button. 2. Select Record using the button and press the OK or button. 3. Select HDD Control using the button and press the OK or - Humax PVR-9400T | User Manual - Page 49
6. Recording and Playback 6.9 Recording's Start/End Time You can set the start/end time of recording. 1. Press the MENU button. 2. Select Record using the button. button and press the OK or 3. Select Recording's Start/End Time using the button and press the OK or button. 4. Select the time - Humax PVR-9400T | User Manual - Page 50
the photos by downloading the files from your PC with 'Media-e linker' program. (USB cables used for external HDDs are purchasable.) ** Follow the instructions to download files: 1. Double-click 'Media eLinker Setup.exe' on the CD-ROM to install the USB driver and application program. You can also - Humax PVR-9400T | User Manual - Page 51
7. Channel List 7. Channel List Four types of channel lists are provided for easy and quick channel browsing. TV Radio Favourite Playlist The list of all TV channels with two sub-groups: one is sorted by channel number, the other is sorted by channel name (Alphabetical). The list of all radio - Humax PVR-9400T | User Manual - Page 52
7. Channel List 7.2 Changing Channel List Group You can select channel list by group. 1. Press the button while the channel list is displayed to view the group list. 2. Select a channel group using the sub-groups. button to display its 3. Press the OK or button, select a sub-group using the - Humax PVR-9400T | User Manual - Page 53
7. Channel List 1. Selecting a Channel Group You can select the channel list group to edit. TV and radio sub-groups can be selected. 1. Press the OK or button in group. 2. Select the group using the button. button and press the OK ** Note: • Press the TV/RADIO channel list directly. button - Humax PVR-9400T | User Manual - Page 54
7. Channel List 3. Locking/Unlocking Channels You can lock or unlock one or more channels. 1. Move the cursor to the channel list using the button. 2. Select a channel using the button and then press the OK button. You can select multiple channels. 3. Select Lock using the button and press - Humax PVR-9400T | User Manual - Page 55
7. Channel List 7.4 Edit Favourite Channels You can edit favourite channel or favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the button. button and press the OK 3. Select Edit Favourite Channels using the press the OK or button. button and 4. You will be - Humax PVR-9400T | User Manual - Page 56
7. Channel List 1. Adding/Removing Favourite Channels You can add favourite channel(s) to a specific favourite channel list or remove the added favourite channel(s) from the list. 1. Select favourite group using . 2. Select the channel(s) in all TV/radio channel list and press to add favourite - Humax PVR-9400T | User Manual - Page 57
7. Channel List 3. Renaming Favourite Channel List You can rename favourite channel list. 1. Select favourite group to rename using . 2. Select and press the OK button. 3. Enter favourite channel list name using the keyboard displayed on the screen. 4. When finishing entering favourite channel list - Humax PVR-9400T | User Manual - Page 58
if it is the future programme. 6. Press the i button in the selected programme to view the detailed information (if available) of the selected programme. 1. Viewing Guide Information by Channel List Groups You can view programme information of the selected channel list by groups. 1. Press the - Humax PVR-9400T | User Manual - Page 59
2. Viewing Programme Information Using Time Bar You can quickly search the time zone using the time bar. 1. Press the GUIDE button. 2. Press the GREEN button to display time bar. 3. Select the each button using the button and press the OK button to move the time - Humax PVR-9400T | User Manual - Page 60
8.2 Finding a Programme You can sufficiently find the programme you want by programme name or genre. 1. Press the GUIDE button. 2. Press the BLUE button. 3. Enter the programme name directly using the keyboard displayed on the screen. 4. When entering programme name is complete, select Find - Humax PVR-9400T | User Manual - Page 61
8. Programme Guide 8.3 Viewing Reserved Programme You can add or edit recording-reserved programmes using the schedule screen. 1. Press the GUIDE button. 2. Press the YELLOW button. Note: For more information about how to add or edit a reservation, refer to 6.2 Recording Schedule. GB 60 - Humax PVR-9400T | User Manual - Page 62
9. Preferences 9. Preferences You can set censorship and all other items suitable for your environment. ** Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit from the menu screen. • You can easily select all menu items using - Humax PVR-9400T | User Manual - Page 63
9. Preferences 2. Change Password You can change the current password. 1. Select Change Password using the OK or button. button and press the 2. Enter New Password using the NUMERIC(0-9) buttons, select OK and press the OK button. 3. Enter the new password again to confirm Verify Password and - Humax PVR-9400T | User Manual - Page 64
select to display the subtitle automatically or not. 1. Select Subtitle Display using the button. 2. Select from Auto and Manual using the OK or button. Auto Manual Subtitles are displayed automatically in the predefined subtitle language. Subtitles are displayed in the language when you select - Humax PVR-9400T | User Manual - Page 65
9. Preferences 9.3 Time Setting You can specify the current time and Power On/Off time. 1. Press the MENU button. 2. Select Preferences using the button and press the OK 3. Select Time Setting using the button and press the OK or button. or button. 1. GMT Offset You can set the GMT offset - Humax PVR-9400T | User Manual - Page 66
9. Preferences 3. Power Off You can set the time when the product is automatically powered off. 1. Select Power Off using the button. 2. Select Enable/Disable using the OK or button. Enable Uses Power Off and sets the Power Off time. Disable Does not use Power Off. ** 3. When you have - Humax PVR-9400T | User Manual - Page 67
9. Preferences 9.4 A/V Control You can set the audio or video output control. 1. Press the MENU button. 2. Select Preferences using the or button. button and press the OK 3. Select A/V Control using the or button. button and press the OK 1. TV-SCART You can set the TV SCART output. 1. - Humax PVR-9400T | User Manual - Page 68
9. Preferences 5. Display Format You can select the display format according to the TV screen ratio. 1. Select Display Format using the button and press the OK or button. 2. If the screen ratio is set to 4:3, you can select an option among Letter Box, Center Mode and Auto using the button and - Humax PVR-9400T | User Manual - Page 69
9. Preferences 9.6 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the or button. button and press the OK 3. Select Miscellaneous Settings using the the OK or button. button and press 1. i-Plate Display Time You can set the duration of the information box to be - Humax PVR-9400T | User Manual - Page 70
9. Preferences 4. Instant Replay Time You can make the current programme go back 7, 15 or 30 seconds. 1. Select Instant replay time using the button and press the OK or button. 2. Select an option among 7, 15 and 30 using the button and press the OK button. 5. Commercial Skip Time You can - Humax PVR-9400T | User Manual - Page 71
10. Installation 10. Installation This chapter describes how to search for channels and other series of procedures. Note: • Press the BACK Press the MENU or button to save the changes and return to the previous menu. or EXIT button to exit from the menu screen. • You can easily select all menu - Humax PVR-9400T | User Manual - Page 72
Press the MENU button. 2. Select Installation using the password. button and press the OK or button. You will be prompted to enter your 3. Select Manual Search using the button and press the OK or button. ** Note: The default password is 0000. If you have forgotten the password, please contact - Humax PVR-9400T | User Manual - Page 73
10. Installation 10.3 Default Setting Default setting restores the product to the default settings. Warning: Please note that once you perform default setting, all data such as channel list and user configured data are deleted, no information on the HDD will be lost. 1. Press the MENU button. - Humax PVR-9400T | User Manual - Page 74
10. Installation 10.4 Antenna Power Make sure to set the Antenna Power to On when you connect an active antenna to the ANTENNA IN connector on the rear of the product. 1. Press the MENU button. 2. Select Installation using the or button. button and press the OK 3. Select Antenna Power from the - Humax PVR-9400T | User Manual - Page 75
11. Software Update 11. Software Update In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. http://www.humaxdigital.com. It is recommended that you - Humax PVR-9400T | User Manual - Page 76
the OK button to finish search. 3. When detecting software update, the following result is displayed. If new software is not found by automatic update, use manual update. 4. Select Yes and press the OK Select No and press the OK menu without updating. button to start updating. button to return to - Humax PVR-9400T | User Manual - Page 77
using the OK or button. button and press the 4. Select Frequency from Manual Update screen using the button and press the OK or button. 5. Enter the new software does not exist, press the OK button to return to the manual update menu. 8. Select Yes and press the OK button to start updating. - Humax PVR-9400T | User Manual - Page 78
11. Software Update 3. Regular Auto Update and Search Time You can specify the regular auto update and search time. Regular auto update is started in standby mode. 1. Select Regular Auto Update using the the OK or button. button and press 2. Select Enable/Disable and press the OK unset the - Humax PVR-9400T | User Manual - Page 79
our website into your PC. 3. Connect your PC to this product with RS-232C serial cable. 4. Execute the installed download tool and then follow the instructions of the download tool. 5. Power On/Off to start operating. ** GB 78 - Humax PVR-9400T | User Manual - Page 80
12. System Information 12. System Information You can view all system information, signal detection and Common Interface. 1. Press the MENU button. 2. Select System using the button. button and press the OK or 12.1 Status You can view system information. 1. Select Status using the button. - Humax PVR-9400T | User Manual - Page 81
12. System Information 12.3 Common Interface You can view the current status of the CI module. 1. Select Common Interface using the OK or button. button and press the 2. Select Slot and press the OK or button. If Common Interface is available, you can view slot information. ** Note: The - Humax PVR-9400T | User Manual - Page 82
13. Games 13. Games Provides various games for user's entertainment. 1. Press the GAME button. 2. According to the instruction displayed on screen, you can enjoy the game using the button. ** Note: Press the EXIT or BACK button to exit the game. and OK GB 81 - Humax PVR-9400T | User Manual - Page 83
14. Menu Map 14. Menu Map GB 82 - Humax PVR-9400T | User Manual - Page 84
. Trouble Shooting 15. Trouble Shooting 15.1 Trouble Shooting Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions - Humax PVR-9400T | User Manual - Page 85
15. Trouble Shooting 7. No password information is given. ** • The default password is always 0000. 8. Channel search does not work. ** • Make sure that the antenna is connected correctly. • - Humax PVR-9400T | User Manual - Page 86
15. Trouble Shooting 15.2 Error Message Error message No or bad signal The is not pointing properly. Adjust aerial. Check the cable from the aerial. If you cannot resolve the problem, you may need to have your aerial and installation tested by a professional. The channel has signal, but no - Humax PVR-9400T | User Manual - Page 87
16. Specification 16. Specification Tuner & Channel Input Connector Frequency Range Signal Level Demodulation Mode FEC mode Guard Intervals MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode RF-Modulator RF/Loop- - Humax PVR-9400T | User Manual - Page 88
16. Specification Power Supply Input Voltage Type Power Consumption Protection Physical Specification Size Weight (Net) Operating Temperature Storage Temperature AC 90~ 250 V, 50/60 Hz Switching Mode Power Supply (SMPS) Operation - Max 28W Standby - Max 11W Separate internal fuse & Lightning - Humax PVR-9400T | User Manual - Page 89
property of a signal measured in cycles per second (=Hz). ** 4. FTA (Free- To-Air) An unscrambled broadcast allowing customers to view channels or services without paying any subscription. ** 5. HDD (Hard Disk Drive) The primary computer storage medium, which is made of one or more aluminum or glass - Humax PVR-9400T | User Manual - Page 90
Pause, Fast Forward/Fast Rewind, Slow Motion, Instant Replay, Commercial Skip, Repeat A-B ** 16.TSR (Time Shifted Recording) A function that record the present programme temporarily to support trick-play ** GB 89 - Humax PVR-9400T | User Manual - Page 91
18. Service and Support 18. Service and Support You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when facing a problem. Germany Tel: - Humax PVR-9400T | User Manual - Page 92
18. Service and Support Italy Tel: Opening Hours: Language: ** Sweden 899 100 080 ( 1+ VAT/min) Mon- : E-mail: Website: Language: ** 01805-778870 ( 0,12/min) Mon-Sun 8:00-23:00 [email protected] www.humax-digital.de Deutsch/English/Turkish Note: For hardware repair, please visit our website. - Humax PVR-9400T | User Manual - Page 93
HUMN-PVR9400T.200GB