Humax VA-3210 User Manual - Page 8

Connecting the Set-Top Box Front & Real Panel 1, Press to change services down and up. 2 SMART CARD SLOT Insert the SMART CARD with it's IC-Chip part facing the bottom side. 3 ERROR LED (AMBER) Indicates that the STB has an error. 4 STANDBY LED (RED) Indicates that the STB is under Standby. 5 OPERATING LED (GREEN) Indicates that the STB is operating. 6 TV/RADIO Press to switch between TV and Radio modes. 7 STANDBY Press to switch between Operation and Standby modes. 1 LNB IN Use to connect an antenna. 2 LNB OUT Use it when connecting to another STB. 3 RS-232C Use it when connecting to your PC. 4 S-VIDEO Use to connect an S-VIDEO signal from your STB to an S-VIDEO input jack on a VCR or TV. 7 5 RCA AUDIO OUTPUT Use to connect an audio signal from your STB to an audio input jack on a VCR or TV. 6 RCA VIDEO OUTPUT Use to connect video signal from your STB to a video input jack on a VCR or TV. 7 RF OUT Use to connect a RF signal from your STB to RF(ANT) input jack on your TV. 8 RF IN Use to connect a general AIR ANT and CABLE jacks to a RF in jack on the STB.