Hunter 20171 Owner's Manual
Hunter 20171 Manual
 |
View all Hunter 20171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 20171 manual content summary:
- Hunter 20171 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 3 Models Owner's Guide and Installation Manual English Español Form# 42683-01 20090911 ©2009 Hunter Fan Co. - Hunter 20171 | Owner's Manual - Page 2
and Cleaning Your Ceiling Fan 17 12 • Troubleshooting 18 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating - Hunter 20171 | Owner's Manual - Page 3
, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you - Hunter 20171 | Owner's Manual - Page 4
, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. (In Canada, call 866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 20171 | Owner's Manual - Page 5
tag, to the service panel. Isolator Ceiling Plate 2-1. Drill two pilot holes into the wood support structure through the Ceilings: Be sure to orient the ceiling plate so that the hook and one of the threaded screw holes in the ceiling plate are on the lower side. 5 42683-01 • 09/11/09 • Hunter Fan - Hunter 20171 | Owner's Manual - Page 6
sits flat on the adapter. 3-2. Install three (3) assembly screws and tighten them securely. Steps 3-1 - 3-2 Top Housing Assembly Screw Hanger Adapter 6 42683-01 • 09/11/09 • Hunter Fan Company - Hunter 20171 | Owner's Manual - Page 7
Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 4-1. Unbundle the wires from the fan. For Standard or Angled mounting: 4-2. To assemble fan to hang down from a flat or angled ceiling the fan ceiling. 4-6. Align the fan and place the hook on the ceiling - Hunter 20171 | Owner's Manual - Page 8
the position of the jumper in the receiver. If they don't match, the controller will not function. For instructions on how to set the jumpers, read CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could - Hunter 20171 | Owner's Manual - Page 9
Black: "AC LIVE IN" • Ceiling Black C • Receiver White: "AC NEUTRAL IN" • Ceiling White Step 6-4 D • Fan Yellow • Receiver Yellow E • Fan White • Receiver White: "LIGHT NEUTRAL OUT" F • Fan Pink • Receiver Pink G • Fan Grey • Receiver Grey H • Fan Black/White • Receiver Black/White: "LIGHT LIVE OUT - Hunter 20171 | Owner's Manual - Page 10
6 • Wiring the Fan (continued) 6-5. Run the thin white antenna wire from the receiver through one of the slots in the ceiling plate. (For best reception, make sure the end of the antenna is exposed at the top of the canopy.) 6-6. Connect the green ground wires from the ceiling plate and the downrod - Hunter 20171 | Owner's Manual - Page 11
canopy and align the tabs in the canopy with the slots in the ceiling plate. Turn the canopy counterclockwise until it locks into place and will not turn any more. 7-3. Insert and tighten the canopy screws securely. Steps 7-1- 7-3 Canopy Canopy Screw 11 42683-01 • 09/11/09 • Hunter Fan Company - Hunter 20171 | Owner's Manual - Page 12
• Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 8-1. Install the blade iron armature screw through the blade iron, and attach lightly to the fan. Insert the second blade iron armature screw, then securely tighten both screws - Hunter 20171 | Owner's Manual - Page 13
9 • Completing Your Installation With a Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 9-1. To attach the light kit top housing, partially install two housing assembly screws into the light kit - Hunter 20171 | Owner's Manual - Page 14
three screws firmly. Plug Connector Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding Light Kit Plug Connector Detail 14 42683-01 • 09/11/09 • Hunter Fan Company Housing Assembly Screw - Hunter 20171 | Owner's Manual - Page 15
kit. 9-10. Secure the glass bowl with three decorative screws. Decorative Screw Tab Glass Bowl Steps 9-8 - 9-10 Decorative Screw 15 42683-01 • 09/11/09 • Hunter Fan Company - Hunter 20171 | Owner's Manual - Page 16
. 10-8. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Steps 10-1 - 10-5 Fan Speed Medium Fan Off Fan Light Step 10-7 16 42683-01 • 09/11/09 • Hunter Fan Company Step 10-6 - Hunter 20171 | Owner's Manual - Page 17
wall switch ON. If the remote control will not be used for 5 days or more, turn the wall switch OFF. 11-3. Ceiling fans work best by blowing air fan finish. To Change Airflow Direction Press the reversing switch on the remote while the fan is running. 17 42683-01 • 09/11/09 • Hunter Fan Company - Hunter 20171 | Owner's Manual - Page 18
is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Type 3 Models
Type 3 Models
Type 3 Models
Form# 42683-01
20090911
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual