Hunter 20552 Owner's Manual

Hunter 20552 Manual

Get Hunter 20552 PDF manuals and user guides View all Hunter 20552 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 20552 manual content summary:

  • Hunter 20552 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42751-01 20100812 ©2010 Hunter Fan Co.
  • Hunter 20552 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 16 9 • Troubleshooting 17 Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of
  • Hunter 20552 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 20552 | Owner's Manual - Page 4
    of 1/16" into the ceiling. Steps 2 - 3 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit. Step 4 - Install the ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling
  • Hunter 20552 | Owner's Manual - Page 5
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 20552 | Owner's Manual - Page 6
    any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in "Preparing the Fan Site." Proper ceiling fan location
  • Hunter 20552 | Owner's Manual - Page 7
    the screws. Do not over tighten. Isolator Ceiling Plate Flat Washer Step 2-2 Steps 2-3 - 2-5 3" Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 7 42751-01 • 08/12/10 • Hunter Fan Company
  • Hunter 20552 | Owner's Manual - Page 8
    Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling the ceiling. 3-6. Align the holes the fan and place the hook on the ceiling
  • Hunter 20552 | Owner's Manual - Page 9
    and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42751-01 • 08/12/10 • Hunter Fan Company Wire Connector Dual Switch Wiring
  • Hunter 20552 | Owner's Manual - Page 10
    tabs. 2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Steps 5-4 - 5-5 Ceiling Plate Canopy Trim Ring Step 5-3 Canopy Screw 10 42751-01 • 08/12/10 • Hunter Fan Company
  • Hunter 20552 | Owner's Manual - Page 11
    one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to
  • Hunter 20552 | Owner's Manual - Page 12
    feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install
  • Hunter 20552 | Owner's Manual - Page 13
    , this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section
  • Hunter 20552 | Owner's Manual - Page 14
    sockets. 7-9. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole the light and fan pull chains using the breakaway connector. (You may find the breakaway connector on the end of the extra chain.) Light Bulbs
  • Hunter 20552 | Owner's Manual - Page 15
    Light Fixture (Continued) Uninstalling the Light Fixture 7-14. To uninstall the light light fixture inside the lower switch housing. 7-17. Unscrew the threaded rod of the light fixture from the lower switch housing. 7-18. Remove the light the sack parts) on the uninstalled the light fixture,
  • Hunter 20552 | Owner's Manual - Page 16
    8-3. The light pull chain controls the power to the light fixture. The chain has two settings: ON and OFF. 8-4. Ceiling fans work best as they will damage the finish. 8-6. The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract
  • Hunter 20552 | Owner's Manual - Page 17
    when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. Problem: Lights shut off suddenly, but fan is still operating 1. Check to make
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42751-01
20100812
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual