Hunter 20715 Owner's Manual
Hunter 20715 Manual
 |
View all Hunter 20715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 20715 manual content summary:
- Hunter 20715 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 45028-01 20110215 ©2011 Hunter Fan Co. - Hunter 20715 | Owner's Manual - Page 2
Light Fixture 13 8 • Operating and Cleaning Your Ceiling Fan 15 9 • Troubleshooting 16 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions - Hunter 20715 | Owner's Manual - Page 3
and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • The outlet box clearance - Hunter 20715 | Owner's Manual - Page 4
of 1/16" into the ceiling. Steps 2 - 3 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit. Step 4 - Install the ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling - Hunter 20715 | Owner's Manual - Page 5
, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you - Hunter 20715 | Owner's Manual - Page 6
site) Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888 - Hunter 20715 | Owner's Manual - Page 7
wood support structure. For proper alignment use slotted holes directly across from each other. If you are installing the fan on an ANGLED ceiling, be Ceiling Peak Large Opening OR Steps 2-2 - 2-4 Ceiling Peak Large Opening LEFT Step 2-3 (Angled Ceiling Only) 7 45028-01 • 02/15/11 • Hunter Fan - Hunter 20715 | Owner's Manual - Page 8
the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. Steps 3-4 - 3-5 WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod Canopy (with Washer) Canopy Trim Ring Setscrew Indent 8 45028-01 • 02/15/11 • Hunter Fan Company - Hunter 20715 | Owner's Manual - Page 9
profile mounting (ceilings less than 8 feet high), see steps 3-6 - 3-10 on this page. 3-6. Remove the screws from the hanger ball bracket. 3-7. Place the low profile washer from the parts sack into the canopy. 3-8. Place the canopy trim ring and canopy with washer on top of the fan assembly - Hunter 20715 | Owner's Manual - Page 10
the wire connectors upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 10 45028-01 • 02/15/11 • Hunter Fan Company - Hunter 20715 | Owner's Manual - Page 11
trim ring counter clockwise until it releases from canopy. Hanger Bracket Canopy Trim Ring Step 5-4 Step 5-3 Step 5-5 Canopy Screw 11 45028-01 • 02/15/11 • Hunter Fan Company - Hunter 20715 | Owner's Manual - Page 12
one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract - Hunter 20715 | Owner's Manual - Page 13
7 • Completing Your Installation With a Multi Staked Light Fixture WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two Detail Housing Assembly Screw Lower Switch Housing 13 45028-01 • 02/15/11 • Hunter Fan Company - Hunter 20715 | Owner's Manual - Page 14
compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. 14 45028-01 • 02/15/11 • Hunter Fan Company - Hunter 20715 | Owner's Manual - Page 15
chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. The light pull chain controls the power to the light fixture. The chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the - Hunter 20715 | Owner's Manual - Page 16
to the fan. Problem: CFL bulbs flicker when controlled by a dimming remote or wall control 1. CFL light bulbs are not usually made for dimming. Replace the CFL bulbs with dimmable light bulbs, or install the fan in a location without a dimming control. If you need parts or service assistance, please
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual
Form# 45028-01
20110215
©2011 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models