Hunter 20720 Owner's Manual
Hunter 20720 Manual
 |
View all Hunter 20720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 20720 manual content summary:
- Hunter 20720 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 45030-01 20090911 ©2009 Hunter Fan Co. - Hunter 20720 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 20720 | Owner's Manual - Page 3
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 20720 | Owner's Manual - Page 4
, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 20720 | Owner's Manual - Page 5
the screws. Do not over tighten. Isolator Ceiling Plate Flat Washer Step 2-2 Steps 2-3 - 2-5 3" Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 5 45030-01 • 09/11/09 • Hunter Fan Company - Hunter 20720 | Owner's Manual - Page 6
and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy and canopy - Hunter 20720 | Owner's Manual - Page 7
back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector Dual Switch Wiring Single Switch Wiring 7 45030-01 • 09/11/09 • Hunter Fan Company - Hunter 20720 | Owner's Manual - Page 8
tabs. 2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Steps 5-4 - 5-5 Ceiling Plate Canopy Trim Ring Step 5-3 Canopy Screw 8 45030-01 • 09/11/09 • Hunter Fan Company - Hunter 20720 | Owner's Manual - Page 9
Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly - Hunter 20720 | Owner's Manual - Page 10
Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch - Hunter 20720 | Owner's Manual - Page 11
ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Plug Connector Detail Plug Connector Housing Assembly Screw 11 45030-01 • 09/11/09 • Hunter Fan Company - Hunter 20720 | Owner's Manual - Page 12
, Thread the light pull chain throught the hole in the center of the cover plate. 7-12. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-13. Place the cover plate up Breakaway Connector Glass Bowl Cover Plate Finial 12 45030-01 • 09/11/09 • Hunter Fan Company - Hunter 20720 | Owner's Manual - Page 13
other plug connector (female) through the hole. 7-20. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing. 7-21. Install the switch housing cap and Terminal Cap Plug Button Step 7-21 13 45030-01 • 09/11/09 • Hunter Fan Company - Hunter 20720 | Owner's Manual - Page 14
8-4. Ceiling fans work fan finish. In cold weather, use upward air flow pattern To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 45030-01 • 09/11/09 • Hunter Fan - Hunter 20720 | Owner's Manual - Page 15
wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. Problem: Lights dim when turned on or do not turn on 1. Check to make
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 45030-01
20090911
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual