Hunter 20803 Owner's Manual
Hunter 20803 Manual
 |
View all Hunter 20803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 20803 manual content summary:
- Hunter 20803 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Model Type A Owner's Guide and Installation Manual English Español Form# 41535-01 20110404 ©2011 Hunter Fan Co. - Hunter 20803 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of - Hunter 20803 | Owner's Manual - Page 3
and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole - Hunter 20803 | Owner's Manual - Page 4
support service panel. 5-2. read the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling - Hunter 20803 | Owner's Manual - Page 5
each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. CAUTION: To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. 5 41535-01 - Hunter 20803 | Owner's Manual - Page 6
are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in "Preparing the Fan Site." Proper ceiling fan location and attachment to the building structure - Hunter 20803 | Owner's Manual - Page 7
tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost 2-3. Your fan comes with four mounting isolators. Position the isolators between the hanger bracket and ceiling by inserting Hunter Fan Company Step 2-2 Canopy Screw Step 2-3 Steps 2-4 - 2-6 - Hunter 20803 | Owner's Manual - Page 8
, lift the motor assembly and place the square hanger into the opening in the ceiling plate. WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. 3-3. Install two locking screws through the holes in the side of the metal - Hunter 20803 | Owner's Manual - Page 9
wire from the ceiling to the black wire from the fan • The black/white wire from the fan to the black/white wire from the ceiling. 4-4. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. Step 4-3 Wire Connector 9 41535-01 • 04/04/11 • Hunter Fan Company - Hunter 20803 | Owner's Manual - Page 10
housing to situate the screws in the narrow ends of the keyholes. 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. Step 5-1 Motor Fan Housing Step 5-3 Canopy Screw 10 41535-01 • 04/04/11 • Hunter Fan Company - Hunter 20803 | Owner's Manual - Page 11
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting - Hunter 20803 | Owner's Manual - Page 12
switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Note: You can customize your Hunter fan with a number of accessory light kits. Steps 7-1 - 7-4 Housing Assembly Screw Lower Switch Housing Housing Assembly Screw 12 41535-01 • 04/04 - Hunter 20803 | Owner's Manual - Page 13
simply reinsert the chain into the connector. 8-3. Ceiling fans work best by blowing air downward (counterclockwise blade fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 13 41535-01 • 04/04/11 • Hunter Fan - Hunter 20803 | Owner's Manual - Page 14
and in the upper and lower switch housing. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade and/or blade iron screws. If you need parts or service assistance, please call 888‑830‑1326 (In
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
Model Type A
Model Type A
Model Type A
Form# 41535-01
20110404
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual