Hunter 21095 Owner's Manual

Hunter 21095 Manual

Get Hunter 21095 PDF manuals and user guides View all Hunter 21095 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 21095 manual content summary:

  • Hunter 21095 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 45057-01 20090624 ©2009 Hunter Fan Co.
  • Hunter 21095 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 21095 | Owner's Manual - Page 3
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 21095 | Owner's Manual - Page 4
    , contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and
  • Hunter 21095 | Owner's Manual - Page 5
    pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 2-2. Your fan comes with four preinstalled
  • Hunter 21095 | Owner's Manual - Page 6
    instructions. 3-1. Unbundle the wires from the fan and remove the paper caution tag. Do not discard the tag until your installation is complete. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling Allen Wrench 6 45057-01 • 06/24/09 • Hunter Fan Company
  • Hunter 21095 | Owner's Manual - Page 7
    and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 7 45057-01 • 06/24/09 • Hunter Fan Company fsdfsdf Wire Connector Dual Switch
  • Hunter 21095 | Owner's Manual - Page 8
    hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots Step 5-3 Canopy Canopy Trim Ring Canopy Screw 8 45057-01 • 06/24/09 • Hunter Fan Company
  • Hunter 21095 | Owner's Manual - Page 9
    6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Attach each blade blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws
  • Hunter 21095 | Owner's Manual - Page 10
    7 • Completing Your Installation With a Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the light kit top housing, partially install two housing assembly screws into the light kit
  • Hunter 21095 | Owner's Manual - Page 11
    Light Kit Top Housing Steps 7-5 Plug Connector Detail Keyhole Slots Light Kit Steps 7-6-7-8 Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product
  • Hunter 21095 | Owner's Manual - Page 12
    Then, Thread the light pull chain throught the hole in the center of the cover plate. 7-13. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-14. Place the cover plate up 40 Watt Maximum) Glass Bowl Steps 7-9-7-15 12 45057-01 • 06/24/09 • Hunter Fan Company
  • Hunter 21095 | Owner's Manual - Page 13
    chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 13 45057-01 • 06/24/09 • Hunter Fan
  • Hunter 21095 | Owner's Manual - Page 14
    is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Form# 45057-01
20090624
©2009 Hunter Fan Co.
English
Español
Owner’s Guide and Installation Manual
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Type 2 Models
Type 2 Models
Type 2 Models