Hunter 21101 Owner's Manual
Hunter 21101 Manual
 |
View all Hunter 21101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21101 manual content summary:
- Hunter 21101 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42678-01 20090608 ©2009 Hunter Fan Co. - Hunter 21101 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 12 9 • Troubleshooting 13 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 21101 | Owner's Manual - Page 3
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 21101 | Owner's Manual - Page 4
missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the - Hunter 21101 | Owner's Manual - Page 5
pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 2-2. Your fan comes with four preinstalled - Hunter 21101 | Owner's Manual - Page 6
in the adapter. Assemble securely with three low profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in the canopy with the hooks on the - Hunter 21101 | Owner's Manual - Page 7
and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 7 42678-01 • 06/08/09 • Hunter Fan Company fsdfsdf Wire Connector Dual Switch - Hunter 21101 | Owner's Manual - Page 8
hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots Step 5-3 Canopy Canopy Trim Ring Canopy Screw 8 42678-01 • 06/08/09 • Hunter Fan Company - Hunter 21101 | Owner's Manual - Page 9
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 21101 | Owner's Manual - Page 10
7 • Installing the Light Kit WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8" housing Assembly Screw Upper Switch Housing Plug Connector Plug Connector Detail 10 42678-01 • 06/08/09 • Hunter Fan Company - Hunter 21101 | Owner's Manual - Page 11
the shades. 7-9. Install the three 60-Watt candelabra light bulbs (included). Remove the protective wrap from the silhouette on the motor housing before starting the fan. Steps 7-8 - 7-9 11 42678-01 • 06/08/09 • Hunter Fan Company - Hunter 21101 | Owner's Manual - Page 12
chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 12 42678-01 • 06/08/09 • Hunter Fan - Hunter 21101 | Owner's Manual - Page 13
is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42678-01
20090608
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual