Hunter 21117 Owner's Manual
Hunter 21117 Manual
 |
View all Hunter 21117 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21117 manual content summary:
- Hunter 21117 | Owner's Manual - Page 1
1 © 2003 Hunter Fan Company 41847-01 04/21/2003 - Hunter 21117 | Owner's Manual - Page 2
Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions service panel. • All wiring must be in accordance with national and local electrical codes suitable support in - Hunter 21117 | Owner's Manual - Page 3
for instructions on properly preparing the site for your new fan. fan support system • Fan must attach directly to building structure. • Fan support system or Nearest Obstruction Figure 4 - Minimum mounting distances © 2003 Hunter Fan Company Washer Wood Screw Ceiling Outlet Box Figure 5 - Hunter 21117 | Owner's Manual - Page 4
Support Brace preparing the wiring CAUTION: All wiring must be in accordance with national and local electrical codes warning device, such as a tag, to the service panel. 2. Thread the fan supply line through the your ceiling fan site. For instructions on how to install your ceiling Hunter Fan Company - Hunter 21117 | Owner's Manual - Page 5
slotted holes (refer to Figure 10) in the ceiling plate with the pilot holes in the wood support structure. Note: The isolation pads should be flush against the ceiling. For Angled Ceilings: Be tighten as to keep the hook from being able to swing. © 2003 Hunter Fan Company 41847-01 04/21/2003 - Hunter 21117 | Owner's Manual - Page 6
: Fan may fall if not assembled as directed in these installation instructions. Hook Loop Figure 16 - Hanging the fan wiring the fan connections. All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, you Hunter Fan Company - Hunter 21117 | Owner's Manual - Page 7
. When all three screws are assembled, securely tighten all three canopy screws. Refer to Figure 19. Tab Hole and Tab Canopy Screw 7 assembling the blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 1. Your fan may include blade grommets. If your fan - Hunter 21117 | Owner's Manual - Page 8
kit assembly through the hole in the bottom of the lower switch housing. Refer to Figures 28 and 29. 41847-01 04/21/2003 © 2003 Hunter Fan Company - Hunter 21117 | Owner's Manual - Page 9
. Fan Pull Chain Glass Bowl Lower Switch Housing Threaded Rod Metal Disk Light Pull Chain Cover Plate Finial Figure 31 - Installing the glass bowl © 2003 Hunter Fan Company 41847-01 04/21/2003 - Hunter 21117 | Owner's Manual - Page 10
10 installing without the light fixture Your Hunter fan comes with an integrated light fixture assembly and Off. 4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward ( - Hunter 21117 | Owner's Manual - Page 11
and in the upper and lower switch housing. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade and/or blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
41847-01
04/21/2003