Hunter 21435 Owner's Manual
Hunter 21435 Manual
 |
View all Hunter 21435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21435 manual content summary:
- Hunter 21435 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42650-01 20090817 ©2009 Hunter Fan Co. - Hunter 21435 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 14 9 • Troubleshooting 16 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 21435 | Owner's Manual - Page 3
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 21435 | Owner's Manual - Page 4
, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 21435 | Owner's Manual - Page 5
to the service panel. 2-1. Drill two pilot holes into the wood support structure through Ceiling Peak For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing towards the ceiling peak. Ceiling Plate 3" Wood Screw Steps 2-3 - 2-6 5 42650-01 • 08/17/09 • Hunter Fan - Hunter 21435 | Owner's Manual - Page 6
in the adapter. Assemble securely with three low profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in the canopy with the hooks on the - Hunter 21435 | Owner's Manual - Page 7
and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 7 42650-01 • 08/17/09 • Hunter Fan Company fsdfsdf Wire Connector Dual Switch - Hunter 21435 | Owner's Manual - Page 8
hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots Step 5-3 Canopy Canopy Trim Ring Canopy Screw 8 42650-01 • 08/17/09 • Hunter Fan Company - Hunter 21435 | Owner's Manual - Page 9
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 21435 | Owner's Manual - Page 10
• Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below - Hunter 21435 | Owner's Manual - Page 11
housing with three housing assembly screws. Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that Detail Plug Connector Housing Assembly Screw 11 42650-01 • 08/17/09 • Hunter Fan Company - Hunter 21435 | Owner's Manual - Page 12
the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the extra chain.) Fan Pull Chain Grommet Hole (Metal Disk) Light Pull Chain 7-10. Feed the fan and light pull chains tight. Fan Pull Chain Hole (Cover Plate) Light Pull Chain Finial - Hunter 21435 | Owner's Manual - Page 13
. Once you have uninstalled the light fixture, continue with step 7‑6. Steps 7-14 - 7-19 Threaded Rod 7-22. Re-attach the lower switch housing back to the fan and reinstall the lower switch housing screws. Cap Plug Button Step 7-20 13 42650-01 • 08/17/09 - Hunter 21435 | Owner's Manual - Page 14
simply reinsert the chain into the connector. 8-3. Ceiling fans work best by blowing air downward (counterclockwise blade fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 42650-01 • 08/17/09 • Hunter Fan - Hunter 21435 | Owner's Manual - Page 15
the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can - Hunter 21435 | Owner's Manual - Page 16
is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42650-01
20090817
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual