Hunter 21573 Owner's Manual
Hunter 21573 Manual
 |
View all Hunter 21573 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21573 manual content summary:
- Hunter 21573 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42507-01 20090908 ©2009 Hunter Fan Co. - Hunter 21573 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 15 9 • Troubleshooting 16 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 21573 | Owner's Manual - Page 3
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 21573 | Owner's Manual - Page 4
, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and - Hunter 21573 | Owner's Manual - Page 5
a tag, to the service panel. Isolator Ceiling Plate 2-1. Drill two pilot holes into the wood support structure. The pilot holes Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 5 42507-01 • 09/08/09 • Hunter Fan - Hunter 21573 | Owner's Manual - Page 6
instructions. Steps 3-1 - 3-2 You can assemble your fan for standard or angled mounting as shown in steps 3-1 - 3-4. For low profile mounting (ceilings Raise the fan and place the hook on the downrod through the loop on the ceiling plate. The arrows on the downrod and on the ceiling plate should - Hunter 21573 | Owner's Manual - Page 7
fall if not assembled as directed in these installation instructions. Step 3-6 You can assemble your fan for standard or angled mounting as shown in steps 3-1 - 3-4 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-5 - 3-11 on this page. For Low Profile - Hunter 21573 | Owner's Manual - Page 8
wire from the fan • The black wire from the ceiling to the black and the black/ white wire from the fan 4-2. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. Wire Connector Dual Switch Wiring Single Switch Wiring 8 42507-01 • 09/08/09 • Hunter Fan Company - Hunter 21573 | Owner's Manual - Page 9
the tab hole in the canopy over the tab on the ceiling plate. 5-2. Raise the canopy. Make sure the holes in the canopy and in the ceiling plate are aligned. 5-3. Partially install the three canopy screws into Canopy Screw Step 5-4 Canopy Canopy Trim Ring 9 42507-01 • 09/08/09 • Hunter Fan Company - Hunter 21573 | Owner's Manual - Page 10
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 21573 | Owner's Manual - Page 11
• Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below - Hunter 21573 | Owner's Manual - Page 12
housing with three housing assembly screws. Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that Plug Connector Housing Assembly Screw 12 42507-01 • 09/08/09 • Hunter Fan Company - Hunter 21573 | Owner's Manual - Page 13
, thread the light pull chain through the hole in the center of the cover plate. 7-10. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-11. Place the cover plate up Breakaway Connector Glass Bowl Cover Plate Finial 13 42507-01 • 09/08/09 • Hunter Fan Company - Hunter 21573 | Owner's Manual - Page 14
, continue with step 7‑6. Step 7-18 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-20 14 42507-01 • 09/08/09 • Hunter Fan Company - Hunter 21573 | Owner's Manual - Page 15
chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 15 42507-01 • 09/08/09 • Hunter Fan - Hunter 21573 | Owner's Manual - Page 16
is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42507-01
20090908
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual