Hunter 21733 Owner's Manual
Hunter 21733 Manual
 |
View all Hunter 21733 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21733 manual content summary:
- Hunter 21733 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42674-01 20100917 ©2010 Hunter Fan Co. - Hunter 21733 | Owner's Manual - Page 2
and Cleaning Your Ceiling Fan 16 9 • Troubleshooting 17 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating - Hunter 21733 | Owner's Manual - Page 3
site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • The outlet - Hunter 21733 | Owner's Manual - Page 4
in the box align with the joist or support brace. 4-3. Drill pilot holes no larger instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling Plate. Step 5 CAUTION: All wiring must be in accordance with national and local electrical codes - Hunter 21733 | Owner's Manual - Page 5
this manual include instructions for all three Installer's Choice mounting methods. Considering Optional Accessories Consider using Hunter's the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling - Hunter 21733 | Owner's Manual - Page 6
site) Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888 - Hunter 21733 | Owner's Manual - Page 7
, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should Plate 3" Wood Screw Steps 2-3 - 2-6 7 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 8
in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod Low Profile Screw Low Profile Washer 8 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 9
wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42674-01 • 09/17/10 • Hunter Fan Company fsdfsdf Wire Connector Dual Switch Wiring Single Switch Wiring - Hunter 21733 | Owner's Manual - Page 10
in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the Step 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 11
. Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to - Hunter 21733 | Owner's Manual - Page 12
Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install - Hunter 21733 | Owner's Manual - Page 13
switch housing with three housing assembly screws. Steps 7-6 - 7-7 Lower Switch Housing Plug Connector Plug Connector Detail Housing Assembly Screw 13 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 14
up against the glass bowl. Align the holes in the cover plate and glass bowl. 7-13. Thread the fan pull chain and light pull chain through the appropriate holes. 7-14. Thread the light pull chain through the Bowl Breakaway Connector Cover Plate Finial 14 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 15
with step 7‑6. Steps 7-17 - 7-19 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-21 15 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 16
the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. damage the finish. Reversing Switch In warm weather, use downward air flow pattern In cold weather, use upward air flow pattern 16 42674-01 • 09/17/10 • Hunter Fan Company - Hunter 21733 | Owner's Manual - Page 17
is cracked. If so, replace all the blades. Problem: Excessive wobbling 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42674-01
20100917
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual