Hunter 22431 Owner's Manual

Hunter 22431 Manual

Get Hunter 22431 PDF manuals and user guides View all Hunter 22431 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 22431 manual content summary:

  • Hunter 22431 | Owner's Manual - Page 1
    Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Catalog No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Form# 41343-01 20081110 ©2008 Hunter Fan Co.
  • Hunter 22431 | Owner's Manual - Page 2
    and Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating
  • Hunter 22431 | Owner's Manual - Page 3
    this manual include instructions for all three Installer's Choice mounting methods. Considering Optional Accessories Consider using Hunter's the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling
  • Hunter 22431 | Owner's Manual - Page 4
    included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the
  • Hunter 22431 | Owner's Manual - Page 5
    two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" Ceiling in diameter. Plate 2-2. Your fan comes with two neoprene noise isolators two tabs are pointing toward the ceiling peak. 5 41343-01 • 11/10/08 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 6
    insert the downrod through the canopy. Feed the wires from the fan through the downrod. 3-2. Loosen the setscrew on the adapter to ceiling plate. Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-1 - 3-2 Setscrew Steps 3-3
  • Hunter 22431 | Owner's Manual - Page 7
    (ungrounded) from the ceiling to the black (ungrounded) and the black/white wire (ungrounded) from the fan CAUTION: Be sure no bare wire or wire strands are visible after making connections. 4-6. Turn the splices upward the other side of the outlet box. 7 41343-01 • 11/10/08 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 8
    secure in the groove in the hanger ball. WARNING: Failure to complete this step could cause fan to fall. 5-2. Lift the fan and align the canopy screw holes with the mounting holes on the ceiling plate. 5-3. Partially from the canopy. Step 5-4 Step 5-5 8 41343-01 • 11/10/08 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 9
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 22431 | Owner's Manual - Page 10
    • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below
  • Hunter 22431 | Owner's Manual - Page 11
    7-6 - 7-7 Lower Switch Housing Plug Connector Plug Connector Detail Housing Assembly Screw Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product
  • Hunter 22431 | Owner's Manual - Page 12
    , Thread the light pull chain throught the hole in the center of the cover plate. 7-12. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-13. Place the cover plate up Breakaway Connector Glass Bowl Cover Plate Finial 12 41343-01 • 11/10/08 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 13
    with step 7‑6. Steps 7-17 - 7-19 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-21 13 41343-01 • 11/10/08 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 14
    , use downward air flow pattern In cold weather, use upward air flow pattern To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 41343-01 • 11/10/08 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 15
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Type 2 Models
Type 2 Models
Type 2 Models
Form# 41343-01
20081110
©2008 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Catalog No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Owner’s Guide and Installation Manual