Hunter 22431 Owner's Manual

Hunter 22431 Manual

Hunter 22431 manual content summary:

  • Hunter 22431 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Form# 42408-01 20100629 ©2010 Hunter Fan Co.
  • Hunter 22431 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 22431 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • The outlet box clearance
  • Hunter 22431 | Owner's Manual - Page 4
    support service panel. 5-2. Thread the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling
  • Hunter 22431 | Owner's Manual - Page 5
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 22431 | Owner's Manual - Page 6
    sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or
  • Hunter 22431 | Owner's Manual - Page 7
    holes; do not use lubricants on the screws. Do not over tighten. Step 2-2 Flat Washer Toward Ceiling Peak Steps 2-3 - 2-5 3" Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 7 42408-01 • 06/29/10 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 8
    Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-1 - 3-2 Setscrew Steps 3-3 - 3-4 Ceiling Plate Tabs Step 3-5 Downrod Canopy Low Profile Washer #8-32 x 3/4" Screw Canopy Slots 8 42408-01 • 06/29/10 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 9
    . 4-6. Turn the splices upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42408-01 • 06/29/10 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 10
    step could cause fan to fall. 5-2. Lift the fan and align the canopy screw holes with the mounting holes on the ceiling plate. 5-3. Partially install a canopy screw into the side opposite the ceiling plate tabs. ring from the canopy. Step 5-4 Step 5-5 10 42408-01 • 06/29/10 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 11
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 22431 | Owner's Manual - Page 12
    • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below
  • Hunter 22431 | Owner's Manual - Page 13
    switch housing with three housing assembly screws. Steps 7-6 - 7-7 Lower Switch Housing Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light
  • Hunter 22431 | Owner's Manual - Page 14
    , Thread the light pull chain throught the hole in the center of the cover plate. 7-12. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-13. Place the cover plate up Breakaway Connector Glass Bowl Cover Plate Finial 14 42408-01 • 06/29/10 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 15
    with step 7‑6. Steps 7-17 - 7-19 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-21 15 42408-01 • 06/29/10 • Hunter Fan Company
  • Hunter 22431 | Owner's Manual - Page 16
    The chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 16 42408-01 • 06/29/10 • Hunter Fan
  • Hunter 22431 | Owner's Manual - Page 17
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Type 2 Models
Type 2 Models
Type 2 Models
Form# 42408-01
20100629
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Owner’s Guide and Installation Manual