Hunter 22720 Owner's Manual

Hunter 22720 Manual

Get Hunter 22720 PDF manuals and user guides View all Hunter 22720 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 22720 manual content summary:

  • Hunter 22720 | Owner's Manual - Page 1
    and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Catalog No. Date Purchased Where Purchased Type 8 Models Owner's Guide and Installation Manual English Español Form# 41968-01 20081002 ©2008 Hunter Fan Co.
  • Hunter 22720 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 12 9 • Troubleshooting 13 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 22720 | Owner's Manual - Page 3
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 22720 | Owner's Manual - Page 4
    missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the
  • Hunter 22720 | Owner's Manual - Page 5
    the screws. Do not over tighten. Isolator Ceiling Plate Flat Washer Step 2-2 Steps 2-3 - 2-5 3" Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 5 41968-01 • 10/02/08 • Hunter Fan Company
  • Hunter 22720 | Owner's Manual - Page 6
    Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling the ceiling. 3-6. Align the holes the fan and place the hook on the ceiling
  • Hunter 22720 | Owner's Manual - Page 7
    through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. fsdfsdf Wire Connector Dual Switch Wiring Single Switch Wiring 7 41968-01 • 10/02/08 • Hunter Fan Company
  • Hunter 22720 | Owner's Manual - Page 8
    tabs. 2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Steps 5-4 - 5-5 Ceiling Plate Canopy Trim Ring Step 5-3 Canopy Screw 8 41968-01 • 10/02/08 • Hunter Fan Company
  • Hunter 22720 | Owner's Manual - Page 9
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 22720 | Owner's Manual - Page 10
    sack parts) through the switch housing cap and into the switch housing. 7-4. Tighten the finial. Switch Housing Cap Steps 7-3 - 7-4 10 41968-01 • 10/02/08 • Hunter Fan Company
  • Hunter 22720 | Owner's Manual - Page 11
    tight. 8-2. Place each shade on a socket. 8-3. Install 4 candelabra bulbs (40 Watt maximum). Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product
  • Hunter 22720 | Owner's Manual - Page 12
    chain has two settings: ON and OFF. 9-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 12 41968-01 • 10/02/08 • Hunter Fan
  • Hunter 22720 | Owner's Manual - Page 13
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Type 8 Models
Type 8 Models
Type 8 Models
Form# 41968-01
20081002
©2008 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Catalog No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual