Hunter 23289 Owner's Manual
Hunter 23289 Manual
 |
View all Hunter 23289 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 23289 manual content summary:
- Hunter 23289 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 45013-01 20110616 ©2011 Hunter Fan Co. - Hunter 23289 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 23289 | Owner's Manual - Page 3
the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Angled Mounting Style Ceiling Outlet Box 8 12 For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy - Hunter 23289 | Owner's Manual - Page 4
missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the - Hunter 23289 | Owner's Manual - Page 5
wood support structure. For proper alignment use slotted holes directly across from each other. If you are installing the fan on an ANGLED ceiling, be Ceiling Peak Large Opening OR Steps 2-2 - 2-4 Ceiling Peak Large Opening LEFT Step 2-3 (Angled Ceiling Only) 5 45013-01 • 06/16/11 • Hunter Fan - Hunter 23289 | Owner's Manual - Page 6
the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-1 - 3-3 Adapter Steps 3-4 - 3-5 Downrod Canopy Canopy Trim Ring Set Screw Indent 6 45013-01 • 06/16/11 • Hunter Fan - Hunter 23289 | Owner's Manual - Page 7
connectors upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector 7 45013-01 • 06/16/11 • Hunter Fan Company - Hunter 23289 | Owner's Manual - Page 8
canopy trim ring counter clockwise until it releases from canopy. Hanger Bracket Canopy Trim Ring Step 5-4 Step 5-3 Step 5-5 Canopy Screw 8 45013-01 • 06/16/11 • Hunter Fan Company - Hunter 23289 | Owner's Manual - Page 9
• Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Install the grommets blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting - Hunter 23289 | Owner's Manual - Page 10
• Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below - Hunter 23289 | Owner's Manual - Page 11
this specific application and can overheat if serviced by untrained personnel. If any servicing is required, the product should be returned to an authorized service facility for examination or repair. 7-6. Detail Plug Connector Housing Assembly Screw 11 45013-01 • 06/16/11 • Hunter Fan Company - Hunter 23289 | Owner's Manual - Page 12
Then, thread the light pull chain throught the hole in the center of the cover plate. 7-11. Thread the fan pull chain through the grommet hole on the side of the cover plate. 7-12. Place the cover plate up Steps 7-9 - 7-13 Glass Bowl Cover Plate Finial 12 45013-01 • 06/16/11 • Hunter Fan Company - Hunter 23289 | Owner's Manual - Page 13
fixture, continue with step 7‑6. Plug Connectors Threaded Rod Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-20 13 45013-01 • 06/16/11 • Hunter Fan Company - Hunter 23289 | Owner's Manual - Page 14
simply reinsert the chain into the connector. 8-3. Ceiling fans work best by blowing air downward (counterclockwise blade fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 45013-01 • 06/16/11 • Hunter Fan - Hunter 23289 | Owner's Manual - Page 15
instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888‑830‑1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 45013-01
20110616
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual