Hunter 23298 Owner's Manual
Hunter 23298 Manual
 |
View all Hunter 23298 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 23298 manual content summary:
- Hunter 23298 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 3 Models Owner's Guide and Installation Manual English Español Form# 41874-01 20090813 ©2009 Hunter Fan Co. - Hunter 23298 | Owner's Manual - Page 2
the Remote Control and Mounting the Cradle 12 9 • Operating and Cleaning Your Ceiling Fan 14 10 • Troubleshooting 16 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives - Hunter 23298 | Owner's Manual - Page 3
, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Standard Mounting hangs from the ceiling by a downrod (included - Hunter 23298 | Owner's Manual - Page 4
parts are missing or damaged, contact your Hunter dealer or call Hunter Parts Department at 888-830-1326 (In Canada, call 1-866-2681936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan - Hunter 23298 | Owner's Manual - Page 5
lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3" Screw Step 2-2 Steps 2-3 - 2-5 For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing towards the ceiling peak. 5 41874-01 • 08/13/09 • Hunter Fan Company - Hunter 23298 | Owner's Manual - Page 6
the set screw. 3-5. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim of the canopy. WARNING: Fan may fall if not assembled as directed in these installation instructions. Canopy Trim Ring U-shaped Hole 6 41874-01 • 08/13/09 • Hunter Fan Company - Hunter 23298 | Owner's Manual - Page 7
power wire from the ceiling to the white wire from the fan Step 4-3 • The black power wire from the ceiling to the black wire from the fan Wire Connector 4-4. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. 7 41874-01 • 08/13/09 • Hunter Fan Company - Hunter 23298 | Owner's Manual - Page 8
raise the fan off the hook. 5-2. Align the slots in the canopy with the tabs on the ceiling plate. 5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally trim ring from the canopy Canopy Screw 8 41874-01 • 08/13/09 • Hunter Fan Company - Hunter 23298 | Owner's Manual - Page 9
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). Step 6-1 (Detail) 6-1. Your fan may include blade grommets. If your fan screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 23298 | Owner's Manual - Page 10
Assembly WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper light kit assembly, partially install assembly screws. Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 - Hunter 23298 | Owner's Manual - Page 11
three cradles. Push the moveable cradle back in and tighten the thumbscrew. Cradle Thumbscrew Step 7-8 Shade Step 7-9 Step 7-9 (Detail) 11 41874-01 • 08/13/09 • Hunter Fan Company - Hunter 23298 | Owner's Manual - Page 12
. Use the inner mounting holes. Removed Tabs Step 8-2 (Rocker Light Switch) CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to - Hunter 23298 | Owner's Manual - Page 13
Dip Switches You will only have to change the dip switch settings in the remote if you are using more than one remote controlled fan in the same area and want to control them separately. You may want to label your remotes to ensure you do not mix them up. 1. At the circuit breaker or fuse - Hunter 23298 | Owner's Manual - Page 14
blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft. In warm weather, use downward air flow pattern To Change Airflow Direction Press the reversing switch on the remote while the fan is running. 14 41874-01 • 08/13/09 • Hunter Fan Company - Hunter 23298 | Owner's Manual - Page 15
9 • Operating and Cleaning Your Ceiling Fan (Continued) 9-5. For cleaning finishes, use a soft brush or lint-free cloth to prevent scratching. and beauty. Clean painted and high-gloss blades in the same manner as the fan finish. In cold weather, use upward air flow pattern 15 41874-01 • 08/13/09 - Hunter 23298 | Owner's Manual - Page 16
blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Type 3 Models
Type 3 Models
Type 3 Models
Form# 41874-01
20090813
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual