Home » Hunter Manuals » Fans » Hunter 23746 » Manual Viewer

Hunter 23746 Installation Manual

Hunter 23746 Manual

View all Hunter 23746 manuals

Add to My Manuals
Save this manual to your list of manuals

Hunter 23746 manual content summary:

Hunter 23746 | Installation Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 45077-01 20120814 ©2012 Hunter Fan Co.
Hunter 23746 | Installation Manual - Page 2
and Cleaning Your Ceiling Fan 16 9 • Troubleshooting 17 Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are
Hunter 23746 | Installation Manual - Page 3
an approved connector. • Six inches of lead wires extend from outlet box. If your existing fan site is suitable, skip ahead to Section 2 • Installing the Ceiling Plate. Fan Support System Fan Support System Suitable Existing Fan Site Wiring Outlet Box 3 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 4
go to your fan manual and continue with Section 2 • Installing the Ceiling Plate. Step 5 CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 5
risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. Low Profile Mounting fits close to the ceiling, recommended for ceilings less than 8 feet high 5 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 6
sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or
Hunter 23746 | Installation Manual - Page 7
support structure. For proper alignment use slotted holes directly across from each other. If you are installing the fan on an ANGLED ceiling, Ceiling Peak Large Opening OR Steps 2-2 - 2-4 Ceiling Peak Large Opening LEFT Step 2-3 (Angled Ceiling Only) 7 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 8
bracket. (Rotate the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. Steps 3-4 - 3-5 WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod Canopy Canopy Trim Ring Setscrew Indent 8 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 9
. WARNING: Fan may fall if not assembled as directed in these installation instructions. Step 3-6 (Not Actual Size) Steps 3-8 - 3-9 Low Profile Washer Step 3-7 (Detail) Low Profile Washer Adapter Canopy Trim Ring #8-32 x 3/4" Screw Step 3-10 9 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 10
connectors upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector 10 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 11
trim ring counter clockwise until it releases from canopy. Hanger Bracket Canopy Trim Ring Step 5-4 Step 5-3 Step 5-5 Canopy Screw 11 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 12
by hand until they are completely separated from the blade iron. Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry . 3. Carefully remove the blade. 12 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 13
this fan model. 7-1. To attach the lower switch housing assembly to the fan, partially compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light troubleshooting section. Steps 7-3 - 7-5 Lower Switch Housing 13 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 14
into the sockets. 7-7. Thread the light and fan pull chains through the hole in the center of the center of the cover plate. 7-8. Thread the fan pull chain through the grommet hole in the side of extra pull chains (included) to the light and fan pull chains using the breakaway connector. (You may
Hunter 23746 | Installation Manual - Page 15
, continue with step 7‑1. Steps 7-15 - 7-17 Threaded Rod Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-18 15 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 16
8-4. Ceiling fans work fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch In warm weather, use downward air flow pattern In cold weather, use upward air flow pattern 16 45077-01 • 08/14/12 • Hunter Fan Company
Hunter 23746 | Installation Manual - Page 17
Turn the power to the fan off at the wall switch. Wait 5 minutes, then resume power to the fan. If you need parts or service assistance, please call 888‑830‑1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400