Hunter 23857 Owner's Manual

Hunter 23857 Manual

Get Hunter 23857 PDF manuals and user guides View all Hunter 23857 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 23857 manual content summary:

  • Hunter 23857 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2A Models Owner's Guide and Installation Manual English Español Form# 42888-01 20100301 ©2010 Hunter Fan Co.
  • Hunter 23857 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 23857 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 23857 | Owner's Manual - Page 4
    support service panel. 5-2. read the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling
  • Hunter 23857 | Owner's Manual - Page 5
    each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. CAUTION: To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. 5 42888-01
  • Hunter 23857 | Owner's Manual - Page 6
    To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct
  • Hunter 23857 | Owner's Manual - Page 7
    tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost 2-3. Your fan comes with four mounting isolators. Position the isolators between the hanger bracket and ceiling by inserting Hunter Fan Company Step 2-2 Canopy Screw Step 2-3 Steps 2-4 - 2-6
  • Hunter 23857 | Owner's Manual - Page 8
    , lift the motor assembly and place the square hanger into the opening in the ceiling plate. WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. 3-3. Install two locking screws through the holes in the side of the metal
  • Hunter 23857 | Owner's Manual - Page 9
    the splices upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector 9 42888-01 • 03/01/10 • Hunter Fan Company
  • Hunter 23857 | Owner's Manual - Page 10
    housing to situate the screws in the narrow ends of the keyholes. 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. Step 5-1 Motor Fan Housing Step 5-3 Canopy Screw 10 42888-01 • 03/01/10 • Hunter Fan Company
  • Hunter 23857 | Owner's Manual - Page 11
    . Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to
  • Hunter 23857 | Owner's Manual - Page 12
    Installation With a Multi Staked Light Fixture WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8" housing assembly Housing Assembly Screw Plug Connector Detail 12 42888-01 • 03/01/10 • Hunter Fan Company
  • Hunter 23857 | Owner's Manual - Page 13
    the thumbscrews securely. 7-8. Install the included B10 candelabra-based light bulbs (60 Watt maximum each). Shade Bulb Thumbscrews Steps 7-7 - 7-8 13 42888-01 • 03/01/10 • Hunter Fan Company
  • Hunter 23857 | Owner's Manual - Page 14
    light fixture. The chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm they will damage the finish. 8-6. The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to
  • Hunter 23857 | Owner's Manual - Page 15
    and in the upper and lower switch housing. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade and/or blade iron screws. If you need parts or service assistance, please call 888‑830‑1326 (In
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Type 2A Models
Type 2A Models
Type 2A Models
Form# 42888-01
20100301
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual