Hunter 23908 Owner's Manual

Hunter 23908 Manual

Get Hunter 23908 PDF manuals and user guides View all Hunter 23908 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 23908 manual content summary:

  • Hunter 23908 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2A Models Owner's Guide and Installation Manual English Español Form# 42882-01 20101214 ©2010 Hunter Fan Co.
  • Hunter 23908 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter nameplate label (located on the top of the fan motor housing). Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE
  • Hunter 23908 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 23908 | Owner's Manual - Page 4
    box align with the joist or support brace. 4-3. Drill pilot holes no fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Hanger Bracket. Step 5 CAUTION: All wiring must be in accordance with national and local electrical codes
  • Hunter 23908 | Owner's Manual - Page 5
    each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. CAUTION: To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. 5 42882-01
  • Hunter 23908 | Owner's Manual - Page 6
    sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or
  • Hunter 23908 | Owner's Manual - Page 7
    tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost 2-3. Your fan comes with four mounting isolators. Position the isolators between the hanger bracket and ceiling by inserting Hunter Fan Company Step 2-2 Canopy Screw Step 2-3 Steps 2-4 - 2-6
  • Hunter 23908 | Owner's Manual - Page 8
    , lift the motor assembly and place the square hanger into the opening in the ceiling plate. WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. 3-3. Install two locking screws through the holes in the side of the metal
  • Hunter 23908 | Owner's Manual - Page 9
    the splices upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector 9 42882-01 • 12/14/10 • Hunter Fan Company
  • Hunter 23908 | Owner's Manual - Page 10
    to situate the screws in the narrow ends of the keyholes. 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. Step 5-1 Motor Fan Housing Keyhole Step 5-3 10 42882-01 • 12/14/10 • Hunter Fan Company Canopy Screw
  • Hunter 23908 | Owner's Manual - Page 11
    . Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to
  • Hunter 23908 | Owner's Manual - Page 12
    Installation With a Multi Staked Light Fixture WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8" housing assembly Housing Assembly Screw Plug Connector Detail 12 42882-01 • 12/14/10 • Hunter Fan Company
  • Hunter 23908 | Owner's Manual - Page 13
    with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. 13 42882-01 • 12/14/10 • Hunter Fan Company
  • Hunter 23908 | Owner's Manual - Page 14
    . In warm weather, use downward air flow pattern 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) the reversing switch on the fan to the opposite position. Restart fan. 8-6. The blades on this fan have been treated with Hunter's Dust Armor protection, making
  • Hunter 23908 | Owner's Manual - Page 15
    9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Type 2A Models
Type 2A Models
Type 2A Models
Form# 42882-01
20101214
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual