Hunter 23963 Owner's Manual
Hunter 23963 Manual
 |
View all Hunter 23963 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 23963 manual content summary:
- Hunter 23963 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42783-01 20090819 ©2009 Hunter Fan Co. - Hunter 23963 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 23963 | Owner's Manual - Page 3
, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you - Hunter 23963 | Owner's Manual - Page 4
missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the - Hunter 23963 | Owner's Manual - Page 5
the screws. Do not over tighten. Isolator Ceiling Plate Flat Washer Step 2-2 Steps 2-3 - 2-5 3" Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 5 42783-01 • 08/19/09 • Hunter Fan Company - Hunter 23963 | Owner's Manual - Page 6
Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling ceiling. 3-6. Align the holes fan and place the hook on the ceiling - Hunter 23963 | Owner's Manual - Page 7
them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. fsdfsdf Wire Connector Single Switch Wiring 7 42783-01 • 08/19/09 • Hunter Fan Company - Hunter 23963 | Owner's Manual - Page 8
tabs. 2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Steps 5-4 - 5-5 Ceiling Plate Canopy Trim Ring Step 5-3 Canopy Screw 8 42783-01 • 08/19/09 • Hunter Fan Company - Hunter 23963 | Owner's Manual - Page 9
Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both - Hunter 23963 | Owner's Manual - Page 10
Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install - Hunter 23963 | Owner's Manual - Page 11
Steps 7-6 - 7-7 Lower Switch Housing Plug Connector Plug Connector Detail Housing Assembly Screw Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this - Hunter 23963 | Owner's Manual - Page 12
, thread the light pull chain through the hole in the center of the cover plate. 7-10. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-11. Place the cover plate up Breakaway Connector Glass Bowl Cover Plate Finial 12 42783-01 • 08/19/09 • Hunter Fan Company - Hunter 23963 | Owner's Manual - Page 13
with Step 7‑6. Steps 7-17 - 7-19 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-21 13 42783-01 • 08/19/09 • Hunter Fan Company - Hunter 23963 | Owner's Manual - Page 14
Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 42783-01 • 08/19/09 • Hunter Fan - Hunter 23963 | Owner's Manual - Page 15
is cracked. If so, replace all the blades. Problem: Excessive wobbling 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42783-01
20090819
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual