Hunter 23970 Owner's Manual

Hunter 23970 Manual

Get Hunter 23970 PDF manuals and user guides View all Hunter 23970 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 23970 manual content summary:

  • Hunter 23970 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42637-01 20110617 ©2011 Hunter Fan Co.
  • Hunter 23970 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of
  • Hunter 23970 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 23970 | Owner's Manual - Page 4
    support service panel. 5-2. read the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling
  • Hunter 23970 | Owner's Manual - Page 5
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 23970 | Owner's Manual - Page 6
    To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct
  • Hunter 23970 | Owner's Manual - Page 7
    to the service panel. 2.1 Drill two pilot holes into the wood support structure through Ceiling Peak For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. Ceiling Plate 3" Wood Screw Steps 2-3 - 2-6 7 42637-01 • 06/17/11 • Hunter Fan
  • Hunter 23970 | Owner's Manual - Page 8
    in the adapter. Assemble securely with three low profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3.7 Raise the fan and align the slots in the canopy with the hooks on the
  • Hunter 23970 | Owner's Manual - Page 9
    and push them carefully back through the ceiling plate into the outlet box. 4.7 Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42637-01 • 06/17/11 • Hunter Fan Company Wire Connector Dual Switch Wiring
  • Hunter 23970 | Owner's Manual - Page 10
    hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42637-01 • 06/17/11 • Hunter Fan Company
  • Hunter 23970 | Owner's Manual - Page 11
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 23970 | Owner's Manual - Page 12
    Installation With a Multi Staked Light Fixture WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8" housing assembly Housing Assembly Screw Plug Connector Detail 12 42637-01 • 06/17/11 • Hunter Fan Company
  • Hunter 23970 | Owner's Manual - Page 13
    , this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section
  • Hunter 23970 | Owner's Manual - Page 14
    chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 14 42637-01 • 06/17/11 • Hunter Fan
  • Hunter 23970 | Owner's Manual - Page 15
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42637-01
20110617
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual