Hunter 28078 Owner's Manual

Hunter 28078 Manual

Get Hunter 28078 PDF manuals and user guides View all Hunter 28078 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 28078 manual content summary:

  • Hunter 28078 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42739-01 20090220 ©2009 Hunter Fan Co.
  • Hunter 28078 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We
  • Hunter 28078 | Owner's Manual - Page 3
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 28078 | Owner's Manual - Page 4
    missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan location and attachment to the
  • Hunter 28078 | Owner's Manual - Page 5
    the screws. Do not over tighten. Isolator Ceiling Plate Flat Washer Step 2-2 Steps 2-3 - 2-5 3" Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 5 42739-01 • 02/20/09 • Hunter Fan Company
  • Hunter 28078 | Owner's Manual - Page 6
    Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling the ceiling. 3-6. Align the holes the fan and place the hook on the ceiling
  • Hunter 28078 | Owner's Manual - Page 7
    through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. fsdfsdf Wire Connector Dual Switch Wiring Single Switch Wiring 7 42739-01 • 02/20/09 • Hunter Fan Company
  • Hunter 28078 | Owner's Manual - Page 8
    tabs. 2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Steps 5-4 - 5-5 Ceiling Plate Canopy Trim Ring Step 5-3 Canopy Screw 8 42739-01 • 02/20/09 • Hunter Fan Company
  • Hunter 28078 | Owner's Manual - Page 9
    Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
  • Hunter 28078 | Owner's Manual - Page 10
    Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below
  • Hunter 28078 | Owner's Manual - Page 11
    of lights may vary. Plug Connector Detail Steps 7-6 - 7-7 Housing Assembly Screw Thumbscrews Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product
  • Hunter 28078 | Owner's Manual - Page 12
    fan. Capacitors 7-12. Locate the reversing switch and carefully remove Fan connector from the end of the fan pull chain. Carefully loosen the bellmouth housing.) 7-17. Insert the pull chain and fan pull chain switch through the Steps 7-17 - Fan Speed Switch 7-21. Continue with Step 7-6. 12 42739-01 •
  • Hunter 28078 | Owner's Manual - Page 13
    the light fixture. The chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air
  • Hunter 28078 | Owner's Manual - Page 14
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42739-01
20090220
©2009 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual