Hunter 28679 Owner's Manual

Hunter 28679 Manual

Get Hunter 28679 PDF manuals and user guides View all Hunter 28679 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 28679 manual content summary:

  • Hunter 28679 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42439-01 20100615 ©2010 Hunter Fan Co.
  • Hunter 28679 | Owner's Manual - Page 2
    Cleaning Your Ceiling Fan 14 9 • Troubleshooting 15 Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of
  • Hunter 28679 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 28679 | Owner's Manual - Page 4
    to allow you to recess the bottom of the outlet box a minimum of 1/16" into the ceiling. Steps 2 - 3 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit. Step 4 - Install the Outlet Box 4-1. Obtain a UL-approved octagonal 4" x 1-1/2" outlet box, plus
  • Hunter 28679 | Owner's Manual - Page 5
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 28679 | Owner's Manual - Page 6
    or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936). Preparing the Fan Site Before you begin installing the fan, follow all the instructions in "Preparing the Fan Site." Proper ceiling fan location and attachment to the
  • Hunter 28679 | Owner's Manual - Page 7
    pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 2-2. Your fan comes with four preinstalled
  • Hunter 28679 | Owner's Manual - Page 8
    in the adapter. Assemble securely with three low profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in the canopy with the hooks on the
  • Hunter 28679 | Owner's Manual - Page 9
    and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42439-01 • 06/15/10 • Hunter Fan Company Wire Connector Dual Switch Wiring
  • Hunter 28679 | Owner's Manual - Page 10
    hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42439-01 • 06/15/10 • Hunter Fan Company
  • Hunter 28679 | Owner's Manual - Page 11
    visible. Refer to the figure on the right. 6-3. Repeat steps 6-1 through 6-2 until all blades are installed. Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean
  • Hunter 28679 | Owner's Manual - Page 12
    , this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section
  • Hunter 28679 | Owner's Manual - Page 13
    sockets. 7-7. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate. 7-8. Thread the fan pull chain through the grommet hole
  • Hunter 28679 | Owner's Manual - Page 14
    , simply reinsert the chain into the connector. 8-3. The light pull chain controls the power to the light fixture. The chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In
  • Hunter 28679 | Owner's Manual - Page 15
    when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. Problem: Lights shut off suddenly, but fan is still operating 1. Check to make
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42439-01
20100615
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual