Hunter 28686 Owner's Manual

Hunter 28686 Manual

Get Hunter 28686 PDF manuals and user guides View all Hunter 28686 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 28686 manual content summary:

  • Hunter 28686 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42443-01 20100920 ©2010 Hunter Fan Co.
  • Hunter 28686 | Owner's Manual - Page 2
    on the top of the fan motor housing). Cautions and Warnings • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of the building
  • Hunter 28686 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 28686 | Owner's Manual - Page 4
    any hardware store or electrical supply house. 5-4. Make certain the wiring meets all national and local standards and ANSI/NFPA 70. You have now successfully prepared your ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing
  • Hunter 28686 | Owner's Manual - Page 5
    , follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter
  • Hunter 28686 | Owner's Manual - Page 6
    site) Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888
  • Hunter 28686 | Owner's Manual - Page 7
    service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 2-2. Your fan
  • Hunter 28686 | Owner's Manual - Page 8
    and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod
  • Hunter 28686 | Owner's Manual - Page 9
    back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42443-01 • 09/20/10 • Hunter Fan Company Wire Connector Dual Switch Wiring Single Switch Wiring
  • Hunter 28686 | Owner's Manual - Page 10
    hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42443-01 • 09/20/10 • Hunter Fan Company
  • Hunter 28686 | Owner's Manual - Page 11
    the Blades Our blade assembly enables you to lock the blades in place without tools Step 6-2 WRONG Step 6-3b WRONG Step 6-3c Step 6-1 Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract Blade Removal: dust and dirt.
  • Hunter 28686 | Owner's Manual - Page 12
    • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below
  • Hunter 28686 | Owner's Manual - Page 13
    WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the lower switch housing assembly to the fan, partially install two housing assembly screws into the upper switch housing. 7-2. Connect the upper plug connector from the motor to the lower plug connector in the lower
  • Hunter 28686 | Owner's Manual - Page 14
    bulbs into the sockets. 7-7. Thread the light and fan pull chains through the hole in the center of the center of the cover plate. 7-8. Thread the fan pull chain through the grommet hole in the side extra pull chains (included) to the light and fan pull chains using the breakaway connector. (You may
  • Hunter 28686 | Owner's Manual - Page 15
    7-17. Install the switch housing cap and plug button to the lower switch housing. 7-18. Once you have uninstalled the light fixture, continue with Step 7‑1. Steps 7-14 - 7-16 Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-17 15 42443-01 • 09/20/10 • Hunter Fan Company
  • Hunter 28686 | Owner's Manual - Page 16
    chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade rotation fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 16 42443-01 • 09/20/10 • Hunter Fan
  • Hunter 28686 | Owner's Manual - Page 17
    9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42443-01
20100920
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual