Hunter 28698 Owner's Manual
Hunter 28698 Manual
 |
View all Hunter 28698 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 28698 manual content summary:
- Hunter 28698 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42444-01 20101101 ©2010 Hunter Fan Co. - Hunter 28698 | Owner's Manual - Page 2
Bowl Light Fixture 12 8 • Operating and Cleaning Your Ceiling Fan 15 9 • Troubleshooting 16 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions - Hunter 28698 | Owner's Manual - Page 3
and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole - Hunter 28698 | Owner's Manual - Page 4
of 1/16" into the ceiling. Steps 2 - 3 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit. Step 4 - Install ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling - Hunter 28698 | Owner's Manual - Page 5
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 28698 | Owner's Manual - Page 6
site) Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888 - Hunter 28698 | Owner's Manual - Page 7
pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 2-2. Your fan comes with four preinstalled - Hunter 28698 | Owner's Manual - Page 8
in the adapter. Assemble securely with three low profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in the canopy with the hooks on the - Hunter 28698 | Owner's Manual - Page 9
back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42444-01 • 11/01/10 • Hunter Fan Company Wire Connector Dual Switch Wiring Single Switch Wiring - Hunter 28698 | Owner's Manual - Page 10
hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42444-01 • 11/01/10 • Hunter Fan Company - Hunter 28698 | Owner's Manual - Page 11
is completely visible. Step 6-2 WRONG Step 6-3b WRONG Step 6-3c Step 6-1 Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract Blade Removal: dust and dirt. Use a dry or slightly damp lint free cloth 1. Cover the - Hunter 28698 | Owner's Manual - Page 12
, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section - Hunter 28698 | Owner's Manual - Page 13
. Attach the extra pull chains (included) to the light and fan pull chains using the breakaway connector. (You may find the connector on the end of the extra chain.) For Light Bulbs Metal Disc Metal Rod Breakaway Connector Glass Bowl Cover Plate Finial 13 42444-01 • 11/01/10 • Hunter Fan Company - Hunter 28698 | Owner's Manual - Page 14
Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-12. To uninstall the light screws attaching the light kit to the lower switch housing. 7-15. Remove the light fixture from the housing. 7-18. Once you have uninstalled the light fixture, continue with step 7‑1. Lower Switch Housing - Hunter 28698 | Owner's Manual - Page 15
light pull chain controls the power to the light fixture. The chain has two settings: ON and OFF. 8-4. Ceiling fans work best by blowing air downward (counterclockwise blade finish. 8-6. The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to - Hunter 28698 | Owner's Manual - Page 16
are securely attached to the blade irons, follow the instructions in the enclosed balancing kit to balance the fan. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. Problem: Lights shut off suddenly, but fan is still operating 1. Check to make sure
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42444-01
20101101
©2010 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual