Hunter 28790 Owner's Manual

Hunter 28790 Manual

Get Hunter 28790 PDF manuals and user guides View all Hunter 28790 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 28790 manual content summary:

  • Hunter 28790 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type T Models Owner's Guide and Installation Manual English Español Form# 45085-01 20110927 ©2011 Hunter Fan Co.
  • Hunter 28790 | Owner's Manual - Page 2
    Switch Housing 12 8 • Troubleshooting 13 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud
  • Hunter 28790 | Owner's Manual - Page 3
    and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • e outlet box clearance hole
  • Hunter 28790 | Owner's Manual - Page 4
    box align with the joist or support brace. 4-3. Drill pilot holes no fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Hanger Bracket. Step 5 CAUTION: All wiring must be in accordance with national and local electrical codes
  • Hunter 28790 | Owner's Manual - Page 5
    speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Angled Mounting Style Ceiling Outlet Box 9 12 CAUTION: To reduce the risk of personal
  • Hunter 28790 | Owner's Manual - Page 6
    To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct
  • Hunter 28790 | Owner's Manual - Page 7
    wood support structure. For proper alignment use slotted holes directly across from each other. If you are installing the fan on an ANGLED ceiling, be Ceiling Peak Large Opening OR Steps 2-2 - 2-4 Ceiling Peak Large Opening LEFT Step 2-3 (Angled Ceiling Only) 7 45085-01 • 09/27/11 • Hunter Fan
  • Hunter 28790 | Owner's Manual - Page 8
    bracket. (Rotate the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-4 - 3-5 Downrod Canopy Canopy Trim Ring Setscrew Indent 8 45085-01 • 09/27/11 • Hunter Fan Company
  • Hunter 28790 | Owner's Manual - Page 9
    connectors upward and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Wire Connector 9 45085-01 • 09/27/11 • Hunter Fan Company
  • Hunter 28790 | Owner's Manual - Page 10
    trim ring counter clockwise until it releases from canopy. Hanger Bracket Canopy Trim Ring Step 5-4 Step 5-3 Step 5-5 Canopy Screw 10 45085-01 • 09/27/11 • Hunter Fan Company
  • Hunter 28790 | Owner's Manual - Page 11
    . Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to
  • Hunter 28790 | Owner's Manual - Page 12
    . Attach the lower switch housing to the upper switch housing with three housing assembly screws. Note: You can customize your Hunter fan with a number of accessory light kits. Steps 7-1 - 7-4 Housing Assembly Screw Plug Connector Lower Switch Housing Upper Switch Housing Steps 7-5 - 7-6 Housing
  • Hunter 28790 | Owner's Manual - Page 13
    blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Type T Models
Type T Models
Type T Models
Form# 45085-01
20110927
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual