Hunter 42122 Owner's Manual - Page 16

Features Menu Options 6 Under your menu options you have the ability to reset your filter counter, span settings, and temperature measurement. After making changes to each menu option, the thermostat will show "Updated", save your changes, and move you back to the home screen. To access these options: 1. Press the button. 2. Once in the menu options list, use the or buttons to scroll through the menu items. The button will take you into the selected menu item. To escape menu options, select a menu item by pressing , then press again. 3. RESET FILTER: If the filter indicator is flashing on the home screen you can reset it here. Use the or buttons to select "Filter" and press . The screen will flash "Updated" and return to the home screen. 4. SPAN 1: The next menu option is to set your thermostats primary span. Use the or buttons to adjust between 1, 2, or, 3 degrees. Press , the screen will flash "Updated" and return to the home screen. The span setting regulates when and how long your system will run. The span has been set at the factory to 2 which will allow the system to turn on1OF (.05OC) above or below the set temperature and run for 1OF (.05OC) above or below the set temperature. 16 44047-01 • 04/13/2010