Husqvarna 128DJx Owners Manual

Husqvarna 128DJx Manual

Get Husqvarna 128DJx PDF manuals and user guides View all Husqvarna 128DJx manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna 128DJx manual content summary:

  • Husqvarna 128DJx | Owners Manual - Page 1
    EN (2 - 29) FR (30 - 57) ES (58 - 85)
  • Husqvarna 128DJx | Owners Manual - Page 2
    be removed from the spark plug when assembling, checking and/or performing maintenance. Beware of thrown objects and ricochets. The operator of the machine shall ensure, while working, that no persons or animals come closer than 50 feet (15 meters). Machines fitted with grass blades can be thrown
  • Husqvarna 128DJx | Owners Manual - Page 3
    Fitting the trimmer guard and trimmer head 12 FUEL HANDLING Fuel safety 13 Fuel 13 Fuelling 14 STARTING AND STOPPING Check before starting 15 Starting and stopping 15 WORKING TECHNIQUES General working instructions 17 MAINTENANCE Carburetor 20 Muffler 20 Spark plug 21 Two-piece shaft 21
  • Husqvarna 128DJx | Owners Manual - Page 4
    31 What is what? 1. Blade 17. Air filter cover 2. Grease filler cap 3. Bevel gear 18. Handle adjustment 19. Locking nut 32 4. Cutting attachment guard 20. Support flange 5. Upper shaft 21. Support cup 6. Lower shaft 22. Drive disc 7. Loop handle 23. Trimmer head 8. Throttle control 24
  • Husqvarna 128DJx | Owners Manual - Page 5
    , maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance. All covers and guards must be fitted before starting. Make sure the spark plug cap and lead
  • Husqvarna 128DJx | Owners Manual - Page 6
    instructions described in this section. If your machine fails any of these checks contact your service agent to get it repaired. Throttle lock The throttle lock is designed to prevent accidental operation of the throttle control. When you press the lock (A) (i.e. when you grasp the handle) it
  • Husqvarna 128DJx | Owners Manual - Page 7
    . Replace the guard if it has been exposed to impact or is cracked. For mufflers, it is very important that you follow the instructions on checking, maintaining, and servicing your machine. Never use a machine that has a faulty muffler. Always use the recommended guard for the cutting attachment
  • Husqvarna 128DJx | Owners Manual - Page 8
    IMPORTANT! Only use cutting attachments with the guards we recommend! See the section on "Technical data". Refer to the instructions for the cutting attachment to check the correct way to load the trimmer line and the correct line diameter. Keep the teeth of the blade correctly sharpened! Follow our
  • Husqvarna 128DJx | Owners Manual - Page 9
    cutters and grass blades S See the cutting attachment packaging for correct sharpening instructions. Sharpen blades and cutters using a single--cut flat file. S Sharpen all edges equally to maintain the balance of the blade. S Smaller machines generally require small trimmer heads and vice versa
  • Husqvarna 128DJx | Owners Manual - Page 10
    adjustment of the handle to a comfortable working position. Tighten the bolt/knob. WARNING: Only grass blades/ grass cutters or trimmer heads/plastic blades may be used when the J- handle is fitted. Saw blades must never be used with the J- handle. Assembling and dismantling the two--piece shaft
  • Husqvarna 128DJx | Owners Manual - Page 11
    and position the lower harness clamp under the shaft. Align the upper and lower clamp screw holes. Clamp must be fitted above the arrow on the shaft (see illustration). Correct height Adjust the harness so that the cutting attachment is parallel to the ground. S Insert two screws into the screw
  • Husqvarna 128DJx | Owners Manual - Page 12
    ASSEMBLY Fitting blades and trimmer heads S When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious
  • Husqvarna 128DJx | Owners Manual - Page 13
    is cleaned and that a complete service is carried out before long--term storage. S The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage. S In order to prevent unintentional starting of the engine, the spark plug cap must always be
  • Husqvarna 128DJx | Owners Manual - Page 14
    refueling. Always move the machine away from the refueling area before starting. S Clean the area around the fuel cap. Contamination in the tank can cause operating problems. S Ensure that the fuel is well mixed by shaking the container before filling the tank. Min. 10 feet (3 meters) 577387001 Rev
  • Husqvarna 128DJx | Owners Manual - Page 15
    a blade if cracks are found. S Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked. WARNING: The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come
  • Husqvarna 128DJx | Owners Manual - Page 16
    In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. WARNING: When the engine is started with the choke in the closed position the cutting attachment will start to rotate immediately. Warm engine
  • Husqvarna 128DJx | Owners Manual - Page 17
    WORKING TECHNIQUES General working instructions IMPORTANT! This section describes the basic safety precautions for working with trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your servicing dealer. Avoid all usage which you consider
  • Husqvarna 128DJx | Owners Manual - Page 18
    blade (between 8 and 12 o'clock) do the cutting. S Hold the trimmer head just above the ground at an angle. It is the end of the trimmer line that does the work. Let the trimmer line work at its own pace. Never press the trimmer line S The trimmer line can easily remove grass and weeds up against
  • Husqvarna 128DJx | Owners Manual - Page 19
    attempt to remove the cut material while the engine is running or the trimmer line is rotating, as this can result in serious injury. Stop the engine and trimmer head before you remove material that has wound around the drive shaft as otherwise there is a risk of injury. The bevel gear can get hot
  • Husqvarna 128DJx | Owners Manual - Page 20
    can- not be adjusted so that the cutting attachment stops, contact your servicing dealer. Do not use the machine until it has been correctly adjusted or repaired. Unit/Maintenance Safety Disconnect the spark plug before performing maintenance, except carburetor adjustments. Muffler CAUTION! Muffler
  • Husqvarna 128DJx | Owners Manual - Page 21
    by: S Incorrect carburetor adjustment. S An incorrect fuel mixture (too much or in- correct type of oil). S A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, difficult
  • Husqvarna 128DJx | Owners Manual - Page 22
    has stopped completely and disconnect the HT lead from the spark plug before you start to work on it. S See the cutting attachment packaging for correct sharpening instructions. S Sharpen blades and cutters using a single--cut flat file. S Sharpen all edges equally to maintain the balance of
  • Husqvarna 128DJx | Owners Manual - Page 23
    , tank or fuel lines. X Check the starter and starter cord. Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0,6 mm or replace the spark plug. Check that the spark plug is fitted with a suppressor. Clean the outside of the carburetor and the space
  • Husqvarna 128DJx | Owners Manual - Page 24
    /type of ignition system Spark plug Electrode gap, inch/mm Walbro/CD Champion RCJ--8Y 0.024/0.6 Fuel and lubrication system Manufacturer/type of carburetor Zama Fuel tank capacity, US pint/liter Zama 0.85/0,4 Weight Weight without fuel, cutting attachment and guard, lbs/kg 11/4.8 Sound
  • Husqvarna 128DJx | Owners Manual - Page 25
    are consequently UL listed: Model 128DJX (M10 LH arbor shaft thread) -- Centre hole in blades/cutters, ∅ 25,4 mm Approved accessories Type Cutting attachment / guard, part. no. Grass blade/grass cutter Grass 255--4 1 inch (∅ 250 4--teeth) 504 00 13--03 / 545 03 09--01 Trimmer head T25 537 33
  • Husqvarna 128DJx | Owners Manual - Page 26
    of such an emission related part, the part will be repaired or replaced by HUSQVARNA. OWNER'S WARRANTY RESPONSIBILITIES: As the small off--road engine owner, you are responsible for the performance of the required maintenance listed in your operator's manual. HUSQVARNA recommends that you retain all
  • Husqvarna 128DJx | Owners Manual - Page 27
    of any warranty maintenance or repair on emission related parts will be provided without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST: Carburetor, Air Filter (covered up to maintenance schedule), Ignition System: Spark Plug (covered up to maintenance
  • Husqvarna 128DJx | Owners Manual - Page 28
    Trimmer Head Line Loading Instructions 1 2 3 4 5 6m 20i 3m 10i 6 7 8 9 577387001 Rev. 2 1/6/11 English--- 28
  • Husqvarna 128DJx | Owners Manual - Page 29
    Plastic Blades (Tri Cut) 1 2 3 4 5 6 7 8 577387001 Rev. 2 1/6/11 English--- 29
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
EN (2 - 29)
F R
(30 - 57)
ES (58 - 85)