Husqvarna 129DJx Owners Manual
Husqvarna 129DJx Manual
 |
View all Husqvarna 129DJx manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 129DJx manual content summary:
- Husqvarna 129DJx | Owners Manual - Page 1
Operator's manual 129DJx Please read the operator's manual carefully and make sure you understand the instructions before using the machine. (A05328CSHV) - Husqvarna 129DJx | Owners Manual - Page 2
/or in the manual: WARNING! Clearing saws, brushcutters and trimmers can be dangerous the operator's manual. Please read the operator's manual carefully and make sure you understand the instructions before using the starting, the spark plug cap must be removed from the spark plug when assembling, - Husqvarna 129DJx | Owners Manual - Page 3
working instructions 18 MAINTENANCE Carburetor 21 Muffler 21 Cooling system 22 Spark plug 22 read the operator's manual carefully. Maintenance, replacement, or repair of of nonauthorized accessories or replacement parts. WARNING! A clearing saw, brushcutter ! or trimmer can be dangerous - Husqvarna 129DJx | Owners Manual - Page 4
, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you ever lend or sell this machine, make sure that the borrower or buyer gets the operator′s manual, so they will also know how to properly maintain and use it. Thank you for using a Husqvarna - Husqvarna 129DJx | Owners Manual - Page 5
4 1 21 What is what on the grass trimmer? 1 Trimmer head 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guard 5 Shaft 6 Shaft coupling 7 Loop handle 8 Throttle trigger 9 Stop switch 10 Throttle trigger lockout 11 Spark plug cap and spark plug 6 7 5 22 9 18 4 20 11 10 16 17 - Husqvarna 129DJx | Owners Manual - Page 6
cutting attachments we service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance. All covers, guards and handles must be fitted before starting. Ensure that the spark plug - Husqvarna 129DJx | Owners Manual - Page 7
necessary, e.g., when fitting cutting attachments. WARNING! Never use a machine with ! faulty safety equipment. The machine's safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service agent to get it repaired - Husqvarna 129DJx | Owners Manual - Page 8
personal injury. For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty muffler. Regularly check that the muffler is securely attached to the machine. If the muffler on your machine is fitted with - Husqvarna 129DJx | Owners Manual - Page 9
cutting attachment has stopped completely and disconnect the spark plug cap trimmer head is intended for trimming grass. The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced - Husqvarna 129DJx | Owners Manual - Page 10
attachment for damage or cracks. A damaged cutting attachment should always be replaced. Sharpening grass knifes and grass blades • Smaller machines generally require small trimmer longer. • See the cutting attachment packaging for correct sharpening instructions. Sharpen blades and cutters using - Husqvarna 129DJx | Owners Manual - Page 11
machine is balanced and comfortable to work with. Use the harness and attach it to the suspension ring when using grass blades. Assembling and dismantling cutters or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle. Attach the - Husqvarna 129DJx | Owners Manual - Page 12
the hole to lock the shaft. • Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation. H H • To dismantle, follow the instructions in the reverse order. WARNING! Never use a cutting ! attachment without an approved guard. See the chapter on Technical - Husqvarna 129DJx | Owners Manual - Page 13
disc aligns with the corresponding hole in the gear housing. • Insert the locking pin (C) in the hole to lock the shaft. • Place the blade (D), support cup (E) and support flange (F) on the output shaft. • Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (26-36 ft-lb). Use - Husqvarna 129DJx | Owners Manual - Page 14
part service is carried out before long-term storage. • The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage. • Secure the machine during transport. • In order to prevent unintentional starting of the engine, the spark plug HUSQVARNA - Husqvarna 129DJx | Owners Manual - Page 15
lessen the risk of fire: Mix and pour fuel outdoors, where there are no sparks or flames. Do not smoke or place hot objects near fuel. Always shut off the . Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank - Husqvarna 129DJx | Owners Manual - Page 16
• Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been complete clutch cover ! and shaft must be fitted before the cutting attachment will start to rotate immediately. machine is started, otherwise the clutch can - Husqvarna 129DJx | Owners Manual - Page 17
Stop the engine by switching off the ignition. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. English - 17 - Husqvarna 129DJx | Owners Manual - Page 18
TECHNIQUES General working instructions IMPORTANT! This section describes the basic safety precautions for working with brush cutters and trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all - Husqvarna 129DJx | Owners Manual - Page 19
between the guard and cutting attachment. Always stop the engine material being cut. • Let the support cup rest lightly against the ground. the blade by following these instructions: 1Always work at full throttle removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt - Husqvarna 129DJx | Owners Manual - Page 20
to constantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head. Sweeping • The fan effect of the rotating line can be used for quick and easy clearing up. Hold the line parallel to and above - Husqvarna 129DJx | Owners Manual - Page 21
spark arrestor mesh. If your machine has this type of muffler, you should clean the mesh at least once a month. This is best done with a wire brush. On mufflers without a catalytic converter the screen should be cleaned weekly, or replaced attachment stops, contact your dealer/service workshop - Husqvarna 129DJx | Owners Manual - Page 22
Cooling system MAINTENANCE mm). The spark plug should be replaced after about a year in operation or earlier if oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, diffi - Husqvarna 129DJx | Owners Manual - Page 23
: • Carburettor malfunctions. • Starting problems. • Loss of engine power. • Unnecessary wear to engine parts • Excessive fuel consumption. Bevel gear must always be replaced. If the machine is used in dusty conditions the air filter should be soaked in oil. See instructions under the heading Oiling - Husqvarna 129DJx | Owners Manual - Page 24
using special grease. X Check the starter and starter cord. Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0,6 mm, or replace the spark plug. Check that the spark plug is fitted with a suppressor. Clean the outside of the carburettor and the space - Husqvarna 129DJx | Owners Manual - Page 25
129DJx Spark plug NGK CMR6A Electrode gap, inch/mm 0,02/0,5 Fuel and lubrication system Fuel tank capacity, US pint/cm3 0,72/0,34 Weight Weight without fuel, cutting attachment Equipped with grass blade (original) 95 Equipped with trimmer head (original) 95 Vibration levels (see note 3) - Husqvarna 129DJx | Owners Manual - Page 26
fied models. Approved accessories Clean sweep attachment with shaft SR600 Hedge trimmer attachment with shaft HA 850 Edger attachment with shaft Saw attachment with shaft PA 1100 Saw attachment without shaft PA Cultivator attachment with shaft CA 150 Trimmer attachment with shaft TA 850 Art No. 537 - Husqvarna 129DJx | Owners Manual - Page 27
of two years. WHAT IS COVERED REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part under the warranty must be performed at no charge to the owner at a warranty station. Warranty services or repairs will be provided at all Husqvarna Forest & Garden distribution centers that are - Husqvarna 129DJx | Owners Manual - Page 28
[email protected]. WHERE TO GET WARRANTY SERVICE Warranty services or repairs are provided through all Husqvarna Forest & Garden authorized servicing dealers. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS Any replacement part may be used in the performance of any warranty - Husqvarna 129DJx | Owners Manual - Page 29
2,0-2,4 mm .079-.095" T25 1 4 2 5 3 6,0 m 18' 10 cm 4" 3,05 m 9' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 129DJx | Owners Manual - Page 30
T25C 1 3 2 2,0-2,4 mm .079-0.095" 2,75 m 9' 4 2,75 m 9' 5 15 cm 6" 6 - Husqvarna 129DJx | Owners Manual - Page 31
- Husqvarna 129DJx | Owners Manual - Page 32
Original instructions 1156628-49 ´´®®zz++XX^^yy¶¶55zz¨¨ 2014-01-21
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
(A05328CSHV)
129DJx
Oper
ator’s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.