Husqvarna 395 XP Owners Manual
Husqvarna 395 XP Manual
 |
View all Husqvarna 395 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 395 XP manual content summary:
- Husqvarna 395 XP | Owners Manual - Page 1
Operator′s manual 395XP, 395XPG Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 395 XP | Owners Manual - Page 2
Visual check. Protective goggles or a visor must be worn. Filling with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking - Husqvarna 395 XP | Owners Manual - Page 3
and servicing chain saw safety equipment 32 Muffler 34 Starter 35 Air filter 36 Spark plug 36 Lubricating the bar tip sprocket 36 Needle bearing lubrication 37 Adjustment of the oil pump 37 Cooling system 37 "Air Injection" centrifugal cleaning 37 Winter use 38 Heated handles 38 - Husqvarna 395 XP | Owners Manual - Page 4
mowers appeared, followed by chain saws in 1959, and it is within this area Husqvarna is working today. Today Husqvarna is one of the leading a long time. Think of this operator′s manual as a valuable document. By following its′ content (using, service, maintenance etc) the life span and the second - Husqvarna 395 XP | Owners Manual - Page 5
on the chain saw? 1 Cylinder cover 2 Front handle 3 Front hand guard 4 Starter 5 Chain oil tank 6 Starter handle 7 Adjuster screws carburettor 8 Choke control/Start throttle lock 9 Rear handle 10 Stop switch (Ignition on/off switch.) 11 Fuel tank 12 Muffler 13 Bar tip sprocket 14 Chain 15 Bar 16 - Husqvarna 395 XP | Owners Manual - Page 6
manual carefully. • Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly. • Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping. • Do not use the chain saw until sufficient chain oil - Husqvarna 395 XP | Owners Manual - Page 7
maintained. See instructions under the heading Checking, maintaining and servicing chain saw safety equipment. If your machine does not pass all the checks, take the saw to a servicing dealer for repair. Chain brake and front hand guard Your chain saw is equipped with a chain brake that is - Husqvarna 395 XP | Owners Manual - Page 8
lose grip of the front handle. • The way the chain brake is activated, either manually or automatically by the inertia release mechanism, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes. If you get a violent - Husqvarna 395 XP | Owners Manual - Page 9
always activate during kickback in the event of a kickback? No. First your brake must be in working order. Testing the brake is simple, see instructions under the heading Checking, maintaining and servicing chain saw safety equipment. We recommend you do before you begin each work session. Second - Husqvarna 395 XP | Owners Manual - Page 10
• Reduce the risk of the saw chain breaking or jumping off the bar. • Obtain optimal cutting performance. • Extend the life of cutting equipment. • Avoid increasing vibration levels. General rules • Only use cutting equipment recommended by us! See instructions under the heading Technical data. 10 - Husqvarna 395 XP | Owners Manual - Page 11
features of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Husqvarna. See instructions under the heading Technical Data for a list of replacement bar and chain combinations we recommend. Bar • Length (inches/cm) • Number - Husqvarna 395 XP | Owners Manual - Page 12
data for information about sharpening your chain. WARNING! Departure from the ! sharpening instructions considerably increases the risk of kickback. Sharpening cutting teeth • The cutting part of the chain is called the cutter and consists of a cutting tooth (A) and the depth gauge (B). The - Husqvarna 395 XP | Owners Manual - Page 13
gauge setting is too large! Adjustment of depth gauge setting • Undo the bar nuts that hold the clutch cover/chain brake. Use the combination spanner. Then tighten the bar nuts by hand as tight as you can. • The cutting teeth should be newly sharpened before adjusting the depth gauge setting. We - Husqvarna 395 XP | Owners Manual - Page 14
. • The saw chain oil tank and the fuel tank are designed so that the fuel runs out before the saw chain oil. However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended - Husqvarna 395 XP | Owners Manual - Page 15
grease or engine oil. • To prolong the life of the bar you should turn it over daily. Checking wear on cutting equipment Check the chain daily for: • Visible cracks in rivets and links. • Whether the chain is stiff. • Whether rivets and links are badly worn. Replace the saw chain if it exhibits - Husqvarna 395 XP | Owners Manual - Page 16
. Make sure that the edges of the cutting links are facing forward on the top edge of the bar. Fit the clutch cover and locate the chain adjuster pin in the hole in the bar. Check that the drive links of the chain fit correctly over the drive sprocket and that the chain is Fitting a spike bumper To - Husqvarna 395 XP | Owners Manual - Page 17
for some time the fuel tank should be emptied and cleaned. Chain oil • We recommend the use of special oil (chain oil) with good adhesion characteristics. • Never use waste oil. This results in damage to the oil pump, the bar and the chain. • It is important to use oil of the right grade (suitable - Husqvarna 395 XP | Owners Manual - Page 18
longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local petrol station. • The bar guard must always be fitted to the cutting attachment when the machine is being transported or in - Husqvarna 395 XP | Owners Manual - Page 19
chain saw unless the bar, chain chain brake must be engaged when the chain saw is started. Activate the brake by moving the front hand guard forwards. Ignition: Slide the ignition starter handle when the cylinder full throttle; the throttle start lock will automatically disengage. As the chain brake - Husqvarna 395 XP | Owners Manual - Page 20
and fingers encircling the chain saw handles. WARNING! Long term inhalation of the ! engine's exhaust fumes, chain oil mist and dust from sawdust can represent a health risk. • Never start a chain saw unless the bar, chain and all covers are fitted correctly. See instructions under the heading - Husqvarna 395 XP | Owners Manual - Page 21
effects of kickback and how to avoid them. See instructions under the heading How to avoid kickback. Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine's safety - Husqvarna 395 XP | Owners Manual - Page 22
to cut with the tip of the bar. Never use the chain saw one-handed! 3 Most kickback accidents happen during limbing. Make sure you are standing firmly and that there is nothing in the way that might make you trip or lose your balance. 5 You must have a steady stance in order to have full control - Husqvarna 395 XP | Owners Manual - Page 23
the handles with both hands. 6 Always use a fast cutting speed, i.e. full throttle. 7 Take great care when you cut with the top edge of the bar, i.e. when cutting from the underside of the object. This is known as cutting on the push stroke. The chain tries to push the chain saw back towards - Husqvarna 395 XP | Owners Manual - Page 24
stop the engine! Don't try to pull the chain saw free. If you do you may be injured by the chain when the chain saw suddenly breaks free. Use a lever to open up the cut and free the chain saw. The following instructions describe how to handle the commonest situations you are likely to encounter when - Husqvarna 395 XP | Owners Manual - Page 25
technique IMPORTANT! It takes a lot of experience to fell a tree. Inexperienced users of chain saws should not fell trees. Do not attempt any task that you feel unsure of! there is high accident risk. See instructions under the heading Freeing a tree that has fallen badly. Safe distance The safe - Husqvarna 395 XP | Owners Manual - Page 26
the diameter of the tree, so that you can make the felling cut and directional cuts with single cutting strokes. See instructions under the heading Technical data section to find out which lengths of bar are recommended for your saw. Set the spike bumper (if one is fitted) just behind the felling - Husqvarna 395 XP | Owners Manual - Page 27
and use a winch. Cut tree/limb from outside the bend, after tension has been released. How to avoid kickback WARNING! Kickback can happen very ! suddenly and violently; kicking the chain saw, bar and chain back at the user. If this happens when the chain is moving it can cause very serious - Husqvarna 395 XP | Owners Manual - Page 28
of the bar. Normally the chain saw and bar are thrown backwards and upwards towards the user. However, the chain saw may move in a different direction depending on the way it was being used when the kickback zone of the bar touched the object. Cutting the trunk into logs See instructions under the - Husqvarna 395 XP | Owners Manual - Page 29
limiters, the carburettor should be adjusted according to the instructions under the heading Carburettor without movement limiters. Function, Basic settings, Fine adjustment WARNING! Do not start the chain saw ! unless the bar, chain and clutch cover (chain brake) are fitted, otherwise the - Husqvarna 395 XP | Owners Manual - Page 30
saw ! unless the bar, chain and clutch cover (chain brake) are fitted, otherwise the clutch may come loose and cause personal injury. Function • The carburettor governs the engine's speed via the throttle control. Air and fuel are mixed in the carburettor. The air/fuel mixture is adjustable - Husqvarna 395 XP | Owners Manual - Page 31
be well below the speed at which the cutting attachment starts to rotate. WARNING! Contact your servicing ! dealer, if the idle speed setting cannot be adjusted so that the chain stops. Do not use the chain saw until it has been properly adjusted or repaired. High speed jet H • The high speed - Husqvarna 395 XP | Owners Manual - Page 32
it to your service workshop. Chain brake and front hand guard Checking brake band wear H • You have now run the machine at settings of H =±0, H=+1/4, H=+1/2 relative to the basic settings. At full throttle the engine has sounded different for each setting. The H-jet is correctly adjusted when the - Husqvarna 395 XP | Owners Manual - Page 33
the chain saw and apply full throttle. Release the throttle control and check that the chain stops and remains stationary. If the chain rotates when the throttle control is in the idle position you should check the carburettor idle adjustment. Apply full throttle and activate the chain brake by - Husqvarna 395 XP | Owners Manual - Page 34
the body of the chain saw. Start the engine attached to the engine unit and handle unit. Some mufflers are equipped with a special spark arrestor mesh. If your machine has be replaced if it is damaged. If the mesh is blocked the machine will overheat and this will cause damage to the cylinder and - Husqvarna 395 XP | Owners Manual - Page 35
tension and can, if handled carelessly, pop out and cause personal injury. Care must be exercised when replacing the return spring or the the starter pulley. See instructions under the heading Changing a broken or worn starter cord. Remember that the recoil spring is coiled under tension in the - Husqvarna 395 XP | Owners Manual - Page 36
shaking it. Spark plug The spark plug condition is influenced by: • Incorrect carburettor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting - Husqvarna 395 XP | Owners Manual - Page 37
turns from the closed position. Bar 28" and longer: 1 3/4 turns from the closed position. These recommendations apply to Husqvarna's chain oil, for other chain oils increase the oil flow by one step. WARNING! The engine must not be ! running when making adjustments. 2 1 Clean the cooling system - Husqvarna 395 XP | Owners Manual - Page 38
damage to the engine. Heated handles (395XPG) On models with the model code XPG both the front handle bar and the rear handle are equipped with electrical heating coils. These are supplied with electricity from a generator built into the chain saw. NB! When the plug is fitted in the air nozzle - Husqvarna 395 XP | Owners Manual - Page 39
drum and clutch spring for wear. Clean the spark plug. Check that the electrode gap is 0.5 mm. Clean the outside of the carburettor. Check the fuel filter and the fuel hose. Replace if necessary. Empty the fuel tank and clean the inside. Empty the oil tank and clean the inside. Check all cables and - Husqvarna 395 XP | Owners Manual - Page 40
data 395XP Engine Cylinder displacement, cm3 94 Cylinder bore, mm 56 Stroke, mm 38,0 Idle speed, rpm 2500 Recommended max. speed, rpm 12500 Power, kW/ rpm 4,9/8700 Ignition system Spark plug Champion RCJ 6Y Electrode gap, mm 0,5 Fuel and lubrication system Fuel tank capacity - Husqvarna 395 XP | Owners Manual - Page 41
following cutting attachments are approved for the model Husqvarna 395XP. Length, inch 18 20 24 28 18 20 24 28 24 28 30 36 Pitch, inch 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 0,404 0,404 0,404 0,404 Bar Gauge, mm 1,5 1,6 Max. nose radius 11T 11T 11T 11T 34 mm 34 mm 34 mm 34 mm 34 mm 34 mm 42 mm 42 mm - Husqvarna 395 XP | Owners Manual - Page 42
only) Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain saw Husqvarna 395XP/XPG has carried out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC type examination - Husqvarna 395 XP | Owners Manual - Page 43
- Husqvarna 395 XP | Owners Manual - Page 44
Original instructions 1153177-26 ´´®®zz++UU11hh¶¶66dd¨¨ 2010-02-03
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
English
395XP, 395XPG
Operator
′
s manual
Please read the operator’s manual carefully and make sure you understand the instructions
before using the machine.