Husqvarna 525LK Operation Manual
Husqvarna 525LK Manual
 |
View all Husqvarna 525LK manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 525LK manual content summary:
- Husqvarna 525LK | Operation Manual - Page 1
Operator′s manual 525LK Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 525LK | Operation Manual - Page 2
that you read and understand the contents of the operator's manual. Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord. Air purge Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear - Husqvarna 525LK | Operation Manual - Page 3
permission of the manufacturer. Always use original accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. WARNING! A clearing saw, brushcutter ! or trimmer can be dangerous if used incorrectly or carelessly - Husqvarna 525LK | Operation Manual - Page 4
. By following its content (usage, service, maintenance, etc), the life span and the second-hand value of the machine can be extended. If you sell this machine, make sure that the operator′s manual is passed on to the buyer. Thank you for using a Husqvarna product. Husqvarna AB has a policy of - Husqvarna 525LK | Operation Manual - Page 5
1 2 WHAT IS WHAT? 4 5 1 What is what? 1 Trimmer head 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guard 5 Shaft 6 Loop handle 7 Throttle trigger 8 Stop switch 18 Drive disc 19 Operator′s manual 20 Allen key 21 Locking pin 22 Shaft coupling 23 Combination spanner English - 5 - Husqvarna 525LK | Operation Manual - Page 6
tant IMPORTANT! The machine is only designed for grass trimming and grass clearing. National or local regulations may regulate the use. Comply to given regulations. The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data - Husqvarna 525LK | Operation Manual - Page 7
attachments. WARNING! Never use a machine with ! faulty safety equipment. The machine's safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service out to ensure that it operates correctly. See the "What is - Husqvarna 525LK | Operation Manual - Page 8
is designed to minimize vibration and make operation easier. Stop switch Use the stop switch to switch off the engine. Use of incorrectly wound cord or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration - Husqvarna 525LK | Operation Manual - Page 9
SAFETY PRECAUTIONS Regularly check that the muffler is securely attached to the machine. The muffler is designed to of fire! For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty muffler. WARNING! - Husqvarna 525LK | Operation Manual - Page 10
vibration. • Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data - Husqvarna 525LK | Operation Manual - Page 11
and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. • Slide the spacer into the slot in , knob and screw. Do not overtighten. C • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Assembling and - Husqvarna 525LK | Operation Manual - Page 12
, follow the instructions in the reverse order. WARNING! Never use a cutting ! attachment without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury. Fitting the trimmer guard and trimmer head • Fit the - Husqvarna 525LK | Operation Manual - Page 13
clothes, change your clothes. Wash any part of your body that has come in contact service is carried out before long-term storage. • The transport guard must always be fitted to the cutting attachment converters. • Mixing ratio 1:50 (2%) with HUSQVARNA two-stroke oil. 1:33 (3%) with oils class - Husqvarna 525LK | Operation Manual - Page 14
on it. Wipe off the spillage and allow remaining fuel to evaporate. • Clean the area around the fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 14 - English - Husqvarna 525LK | Operation Manual - Page 15
completely filled. • Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed . Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object. Make sure no unauthorised - Husqvarna 525LK | Operation Manual - Page 16
the cord until engine starts and gradually operate throttle trigger for increasing engine speed to operate speed. The throttle will automatically disengage assembling, checking and/or performing maintenance. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to - Husqvarna 525LK | Operation Manual - Page 17
instructions IMPORTANT! This section takes up the basic safety precautions for working with a trimmer. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service wrapped around the cutting attachment. 3 Do not use the operator of - Husqvarna 525LK | Operation Manual - Page 18
working operation. Long periods at full throttle without any load on the engine can lead to serious engine damage. WARNING! Sometimes branches or ! grass get caught between the guard and cutting attachment. Always stop the engine before cleaning. Grass trimming with a trimmer head Trimming - Husqvarna 525LK | Operation Manual - Page 19
Husqvarna means that the engine is adapted to local operating conditions, e.g. climate, altitude, petrol and • The basic carburettor settings are adjusted during testing at the factory. The basic setting is richer so that the cutting attachment stops, contact your dealer/service workshop. Do not use - Husqvarna 525LK | Operation Manual - Page 20
fuel mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark - Husqvarna 525LK | Operation Manual - Page 21
a month in operation or earlier if avoid: • Carburettor malfunctions • Starting problems • Loss of engine power • Unnecessary wear to engine parts. • Excessive fuel consumption. filter gear is filled three-quarters full with grease. Use HUSQVARNA special grease. The grease in the bevel gear does not - Husqvarna 525LK | Operation Manual - Page 22
. X Check that the cutting attachment does not rotate at idle. X Clean the air filter. Replace if necessary. X Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked. X Check that the trimmer head is undamaged and not cracked - Husqvarna 525LK | Operation Manual - Page 23
Technical data 525LK Engine Cylinder tank capacity, litre 0,51 Weight Weight without fuel, cutting attachment and guard, kg 4,7 Noise emissions (see note 1) at the operator's ear, measured according to EN/ISO 11806 and ISO 7917, dB(A), min./max.: Equipped with trimmer head (original) - Husqvarna 525LK | Operation Manual - Page 24
for the specified models. Accessories Art No. Hedge trimmer attachment with shaft HA 110 537 19 66-01 Hedge trimmer attachment with shaft HA 850 537 19 66-02 Clean sweep attachment with shaft SR600 537 19 67-01 Edger attachment with shaft 537 19 69-01 Saw attachment with shaft PA 1100 537 - Husqvarna 525LK | Operation Manual - Page 25
- Husqvarna 525LK | Operation Manual - Page 26
Alloy 1 2 ø 2,0 - 2,4 mm/ .080-.095" M10 ø 2,0 - 3,3 mm/ .080- .130" M12 3 4 5 550 mm/ 22" - Husqvarna 525LK | Operation Manual - Page 27
Super Auto II Super Auto II 1" 1 2 3 4 5 2,4 mm .095" 4,0 m 13' 6 ~2,0 m 6,5 ' 15 cm 6" 7 15 cm 6" 8 9 10 - Husqvarna 525LK | Operation Manual - Page 28
2,0-2,4 mm .079-.095" T25 1 4 2 5 3 6,0 m 18' 10 cm 4" 3,05 m 9' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 525LK | Operation Manual - Page 29
2,4-2,7 mm .095-.106" T35, T35x 1 2 4 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 525LK | Operation Manual - Page 30
- Husqvarna 525LK | Operation Manual - Page 31
- Husqvarna 525LK | Operation Manual - Page 32
- Husqvarna 525LK | Operation Manual - Page 33
- Husqvarna 525LK | Operation Manual - Page 34
- Husqvarna 525LK | Operation Manual - Page 35
- Husqvarna 525LK | Operation Manual - Page 36
Original instructions 1154744-26 ´´®®zz++VVjjJJ¶¶66jj¨¨ 2013-11-27
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
English
525LK
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.