Husqvarna 536LiP4 Operation Manual
Husqvarna 536LiP4 Manual
 |
View all Husqvarna 536LiP4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 536LiP4 manual content summary:
- Husqvarna 536LiP4 | Operation Manual - Page 1
Operator′s manual 536LiP4 536LiPT5 Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 536LiP4 | Operation Manual - Page 2
instruction. WARNING! A pole saw is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator's Manual. Please read the operator's manual Use and store battery charger only - Husqvarna 536LiP4 | Operation Manual - Page 3
KEY TO SYMBOLS The following symbols and decals can be found on your pole saw, battery and battery charger: S-561 82 Huskvarna, Sweden Typ QC 330 Art.No. 966 73 06-01 2014 PRI: 100V - 240V ~ 50-60Hz 330W max. SEC: 36V / 7A max WW/YY English - 3 - Husqvarna 536LiP4 | Operation Manual - Page 4
battery and/or on the battery charger 2 Symbols in the operator's manual battery to the machine 22 Starting and stopping 22 WORKING TECHNIQUES General working instructions 23 Stem limbing 24 MAINTENANCE Inspection and maintenance 25 Troubleshooting others. WARNING! A pole saw is a dangerous ! - Husqvarna 536LiP4 | Operation Manual - Page 5
. By following its content (usage, service, maintenance, etc), the life span and the second-hand value of the machine can be extended. If you sell this machine, make sure that the operator′s manual is passed on to the buyer. Thank you for using a Husqvarna product. Husqvarna AB has a policy of - Husqvarna 536LiP4 | Operation Manual - Page 6
14 11 22 21 17 20 6 7 10 8 29 15 What is what? 1 Saw head 2 Chain oil tank 3 Guide bar 4 Bar nut 5 Shaft 6 Harness support hook 7 Keypad 8 Power trigger lockout 9 Power trigger 10 Rear handle 11 Front handle 12 Cord 13 Battery charger (Accessory) 14 Power on and warning indicator (ERROR LED) 15 - Husqvarna 536LiP4 | Operation Manual - Page 7
General power tool safety warnings Please read the operator's manual carefully and make sure you understand the instructions before using the machine. The machine is only designed for cutting branches and twigs. Always remove the battery to prevent the machine being started by accident. WARNING - Husqvarna 536LiP4 | Operation Manual - Page 8
medical help. Liquid ejected from the battery may cause irritations or burns. Service • Have your power tool serviced by a qualified repair person using of the pole saw. Correct handling of the pole saw reduces the risk of inadvertent contact with the saw chain. • Follow instruction for lubricating, - Husqvarna 536LiP4 | Operation Manual - Page 9
this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the Maintenance heading. Carry out an overall inspection of the machine before use. See the maintenance schedule. Personal protective equipment IMPORTANT! A pole saw is - Husqvarna 536LiP4 | Operation Manual - Page 10
, are exclusively used as a power supply for the relevant Husqvarna cordless appliances. To avoid injury, the battery must not be used as a power source for other devices. TROUSERS Use trousers with saw protection. WARNING! Protect the battery from ! direct sunlight, heat or open flame. There is - Husqvarna 536LiP4 | Operation Manual - Page 11
our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. • Regularly check that the battery charger connection wire is intact and that there are no cracks - Husqvarna 536LiP4 | Operation Manual - Page 12
Deactivate the machine. Remove the battery from the machine. Pull the pole saw away from the kerf while machine. Solid red warning light (3) indicates service. Power trigger lockout The power trigger chain's cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. - Husqvarna 536LiP4 | Operation Manual - Page 13
of these checks contact your service agent to get it repaired. WARNING! Always remove the battery to ! prevent the machine you must only fit the types of bar and saw chain recommended by us. Guide bar • Length (inches/cm) Saw chain • Saw chain pitch (inches). (The distance between three drive - Husqvarna 536LiP4 | Operation Manual - Page 14
. This will help you obtain the maximum kickback reduction and cutting performance from your chain. WARNING! Departure from the ! sharpening instructions considerably increases the risk of kickback. Sharpening cutting teeth • When you sharpen a cutting tooth there are four important factors to - Husqvarna 536LiP4 | Operation Manual - Page 15
GENERAL SAFETY PRECAUTIONS teeth on one side of the bar first. Then turn the saw over and file the remaining teeth from the other side. Setting the raker clearance Li-ion • File all the teeth to the same length. When - Husqvarna 536LiP4 | Operation Manual - Page 16
with chain oil Fill with oil once an hour or when the battery is dead. - Tension the chain by turning the chain tensioning screw it is warm summer or cold winter weather. • As a chain saw manufacturer we have developed an optimal chain oil which, with its vegetable service workshop. 16 - English - Husqvarna 536LiP4 | Operation Manual - Page 17
GENERAL SAFETY PRECAUTIONS Checking wear on cutting equipment Saw chain Li-ion Check the chain daily for: • Visible cracks in rivets and links. • Whether the chain is stiff. • Whether rivets and links are badly worn. • If the guide bar is abnormally worn or can be turned an abnormal amount back - Husqvarna 536LiP4 | Operation Manual - Page 18
drive sprocket (B) and that the chain is in the groove in the bar (C). Tighten the bar nut finger-tight. • Loosen the lock screw. • Turn the saw head 90° and secure the head with the screw. • Tension the chain by turning the chain tensioning screw clockwise using the combination spanner. The chain - Husqvarna 536LiP4 | Operation Manual - Page 19
in your arms and back. • Put on the harness. • Hook the harness onto the suspension loop. • Adjust the length of the harness so that the support hook is roughly level with your right hip. English - 19 - Husqvarna 536LiP4 | Operation Manual - Page 20
power supply cable to disconnect it from the wall socket. • Remove the battery from the battery charger. See separate manual for instructions on how to charge the backpack battery. Charging status Lithium-ion batteries can be charged at whatever charging level. The charging process can be cancelled - Husqvarna 536LiP4 | Operation Manual - Page 21
. charged LED 1, LED 2, LED 3, LED 4 are lit. When all the LEDs are lit on the battery, it is fully charged. Transport and storage Li-ion • Ensure the machine is cleaned and that a complete service is carried out before long-term storage. • Transport guard must always be used for storage and - Husqvarna 536LiP4 | Operation Manual - Page 22
it was intended for. Connect battery to the machine NOTE! When using Husqvarna BLi batteries and depending on the battery capacity, there may be lit. Use the power trigger to control the speed. NOTE! Start the pole saw and apply full throttle. Release the throttle control and check that the chain - Husqvarna 536LiP4 | Operation Manual - Page 23
instructions IMPORTANT! This section takes up the basic safety precautions for working with a pole saw. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service the machine. Avoid cutting with the guide bar tip. • To ensure - Husqvarna 536LiP4 | Operation Manual - Page 24
the machine is operated at temperatures below -10°, the product and the battery must be stored in a heated space for at least 24 hours before starting . • Use the stop at the base of the cutting head to provide support during cutting. This will help prevent the cutting attachment from "jumping" on - Husqvarna 536LiP4 | Operation Manual - Page 25
are clean and that the terminals on the battery and the battery charger are always clean and dry before the battery is placed in the battery charger. Regularly check that the battery charger and the battery are intact. • Keep the battery guide tracks clean. • Clean plastic parts with a clean and - Husqvarna 536LiP4 | Operation Manual - Page 26
deviation. Allow the machine to cool down. Dirt in battery connectors. Clean with compressed air or a soft brush. Service Contact your service agent. Troubleshooting the battery and/or the battery charger during charging. Battery LED display Green activate LED flashing. Possible faults Low - Husqvarna 536LiP4 | Operation Manual - Page 27
the machine and also check the connection between battery and the battery X charger. Check that the saw head is not damaged. Replace the saw head All service on the saw head must be carried out by if it is damaged. an authorized Husqvarna dealer. Check condition of Drive Sprocket. Replace - Husqvarna 536LiP4 | Operation Manual - Page 28
load according to the operating cycle of 3 seconds operating and 15 seconds of idling. Use only a Husqvarna original BLi battery in your machine. Approved chargers for the specified batteries, BLi. Battery charger QC330 QC80 Mains Voltage, V 100-240 100-240 Frequency, Hz 50-60 50-60 Power - Husqvarna 536LiP4 | Operation Manual - Page 29
chain filing and file gauges EC Declaration of Conformity (Applies to Europe only) Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500 declares that the battery-operated chain clearing saw Husqvarna 536LiP4 and 536LiPT5 with serial numbers dating 2016 and onwards (the year is clearly stated - Husqvarna 536LiP4 | Operation Manual - Page 30
1140199-26 ´´®®zz++HH33||¶¶66KK¨¨ 2016-03-08
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
English
536LiP4 536LiPT5
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.