Husqvarna AUTOMOWER 315X with installation service Owner Manual
Husqvarna AUTOMOWER 315X with installation service Manual
View all Husqvarna AUTOMOWER 315X with installation service manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna AUTOMOWER 315X with installation service manual content summary:
- Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 1
Operator's manual HUSQVARNA AUTOMOWER® 310/315/315X Read the operator's manual carefully and make sure that you understand the instructions before you use the product. EN, English - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 2
Automower® 310/315/315X 4 1.3 Symbols on the product 5 1.4 Symbols on the display 5 1.5 Symbols on the battery 6 1.6 General manual instructions wire or the guide wire 23 3.8 To extend the boundary wire or the guide wire 23 3.9 service 42 6 Troubleshooting 6.1 Introduction - troubleshooting - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 3
product on www.husqvarna.com. 1.1.1 Support For support about the product, speak to your Husqvarna servicing dealer. 1.1.2 Product guide wire is connected with the boundary wire and makes it much easier and faster for the product to find the charging station. 1.1.2.3 Automower® Connect Automower - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 4
1.2 Product overview Automower® 310/315/315X Automower® 310/315 Automower® 315X 34 2 1 5 11 10 6 7 16 8 13 14 15 23 24 26 25 22 17 18 19 27 28 29 12 9 20 32 21 30 31 33 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 5
29. Operator's Manual and Quick Guide 30. Cable markers 31. Extra blades 32. Low voltage cable 33. Alarm decal 1.3 Symbols on the product These symbols can be found on the product. Study them carefully. WARNING: Read the user instructions opened by authorized service technicians. A - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 6
. Automower® 315X The GPS-supported navigation is not active. Automower® 315X 1.5 Symbols on the battery The accessories function is where all settings for the accessories for the product are set. The product will not cut the grass do to the schedule function. Read the user instructions. Do - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 7
signal PIN code Duration Duration of alarm Duration of time lock Fault messages Info messages Weather timer * Use weather timer Cutting time Low Medium High * Automower® 315/315X 1440 - 002 - 19.02.2020 Introduction - 7 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 8
Charger Delay Disable More time Charging station range Test Reset guide Test Test Reset right left How? How How Disable More Accessories Information Connect@Home** Automower Connect Headlight*** Mower house * Automower® 315/315X **Automower® 310/315 ***Automower® 315X 8 - Introduction 1440 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 9
1.9 Display The display on the product shows information and settings of the product. To access the display, push the STOP button. 1.10 Keypad Use the keypad on the product to navigate in the menu. To access the keypad, push the STOP button. • Use the START button (A) to start the operation of the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 10
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Local regulations may restrict the age of the operator - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 11
be dangerous if used incorrectly. CAUTION: Used if there is a risk of damage to the product, other materials or the adjacent area if the instructions in the manual are not obeyed. WARNING: Do not use the product when persons, especially children, or animals are in the work area. WARNING: Keep your - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 12
safety regulations. Please read the Operator's Manual carefully screws, nuts or cables. Never before staring the product again. • Husqvarna® does not guarantee full compatibility between product again. • Start the product according to the instructions. When the product is switched on, make sure to - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 13
in the product and the charging station, we recommend that all connections to the charging station are disconnected (power supply, boundary wire and guide wire) if there is a risk of a thunderstorm. 1. Mark the wires to simplify reconnecting. The charging station's connections are marked AR, AL and - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 14
important that each wire is connected to the right place. 14 - Safety 1440 - 002 - 19.02.2020 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 15
spare parts and installation material. Note: Refer to www.husqvarna.com for more information about installation. 3.2 Main components for must not run into. The loop wire is used both as boundary wire and guide wire. 3.3 General preparations CAUTION: Holes with water in the lawn can cause damage - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 16
the charging station in an area with protection from the sun. • If the charging station is installed on an island, make sure to connect the guide wire to the island. Refer to To make an island on page 18. • Put the power supply in an area with a roof and protection from - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 17
cm / 12 in. (C) from an obstacle that is 1-5 cm / 0.4-2 in. high. Note: Make a blueprint of the work area before you install the boundary wire and guide wire. E D F C 30 cm / 12" 1-5 cm / 0.4 - 2" • Put the boundary wire 10 cm / 4 in. (D) from an obstacle that is less than 1 cm / 0.4 in. high - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 18
edge of the slope. • Make sure that there is as much free area as possible to the left of the guide wire. The product moves on the left side of the guide wire, when you face the charging station. 3.4.3.2 Passages A passage is a section that has boundary wire on each side and that - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 19
The work area with the charging station is the main area (A). Note: The product must be manually moved between the main area and the secondary area. 3.4.4 To examine where to put the guide wire • Put the guide wire in a line at a minimum of 2 m / 6.5 ft. in front of the charging station. • Make as - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 20
are connected by a narrow passage (B), you can set the product to first follow and then leave the guide wire after a certain distance (C). The settings can be changed in Lawn Coverage on page 27. • Use used with the power supply unit supplied by Husqvarna. 20 - Installation 1440 - 002 - 19.02.2020 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 21
the risk of electrical shock. wire is installed. Refer to To install the guide wire on page 22. 3. Connect the low-voltage cable to the charging is connected to an residualcurrent device. 1. Read and understand the instructions about the charging station. Refer to To examine where to put the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 22
broken circuit. a) Put the 2 ends of the boundary wire and the end of the guide wire into the coupler. Note: Make sure that you can see the ends of the position with stakes on page 22 or To bury the boundary wire or the guide wire on page 23. 11. Connect the charging station to the power outlet. - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 23
cause disruptions until several weeks or months later. 1. Put the boundary wire and the guide wire on the ground. 2. Put the stakes at a maximum of 75 cm charging station from the power outlet. 2. Cut the boundary wire or the guide wire with a pair of wire cutters where it is necessary to install - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 24
to the unique situation for each work area. 3.10.1 Menu structure The main menu contains: • Schedule • Security • Messages • Weather timer (Automower® 315/315X) • Installation • Settings • Accessories Refer to Menu structure overview - 1 on page 7 and Menu structure overview - 2 on page 8. 3.10.2 To - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 25
Product work capacity Automower® 310 Automower® 315 Automower® 315X Approximate daily operation capacity, m2/h, ft2/h 56 / 603 68 / 732 73 / 786 Example: A lawn of 500 m2 / 5400 ft2, cut with a Automower® 310. 500 m2 / 56 ≈ 9 h. 5400 ft2 / 603 ≈ 9 h. Days / week h / day 7 9 Suggested schedule - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 26
of time lock. 3. Use the number buttons to select a time interval of 1-90 days. 4. Push the BACK button. 3.10.3.6 Messages rectify the fault. Refer to Troubleshooting on page 43. If the product is disrupted in any way, for example it is trapped or the battery is low, a message is saved relating - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 27
be able to maintain a well-cut lawn in all parts of the yard. A guide wire must be installed to use the functions. You can set a maximum of Automower® 315X. The GPS Assisted Navigation function helps the product to select the most optimal operation. Use the Lawn coverage function to do manual - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 28
- The product moves in the work area until it finds the signal of the charging station. • Guide wire - The product moves in the work area until it finds the guide wire. The product moves along the guide wire to the charging station. • Boundary wire - The product moves in the work area until it - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 29
charging station to adapt to the work area. 3.10.6.1 To set how the product finds the charging station You can make manual settings to make the product search for the guide wire or the boundary wire in 0-30 min from when the battery is low. 1. Do steps 1-3 in To get access to - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 30
always moves to the left of the guide wire. The corridor width is adjusted automatically. Only in rare occasions manual settings need to be entered. The corridor width can be set between 0-9. If guide corridor width is set to 0, the product runs over the guide wire. The factory setting is 6 for the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 31
mode is activated, it switches off the signal in the boundary loop, the guide wire and the charging station, when the product is parked or is charging. , for example hearing loops or garage doors. Note: To start the product manually in the work area, push the STOP button before you remove the product - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 32
1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Spiral Cutting > Use Spiral Cutting. 3. Push the BACK button. To set the level of Spiral Cutting 1. Do steps 1-3 in To get access to the menu on page 24. - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 33
Husqvarna representative for more information on available accessories. 3.10.14.2 Automower® Connect app The app gives two modes of connectivity: Longrange cellular connectivity and Short-range Bluetooth® connectivity. Automower® 310/315/315X support the instructions in the app. Note: Automower® - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 34
3. Follow the instructions in the app. To enable the GeoFence function GeoFence is a GPS settings to be able to use and send data via the mobile net. Settings for Husqvarna SIM is default. 3.10.14.5 Headlights Automower® 315X To set the schedule for the headlights 1. Do steps 1-3 in To get access to - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 35
3. Use the OK button to enable or disable the Flashes when fault function. 3.10.14.6 To avoid collisions with the mower house The wear on the product and the mower house decreases when you select Avoid collisions with mower. 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 36
4.1 Main switch WARNING: Read the safety instructions carefully before you start the product. WARNING: the battery is empty. When the battery is empty, the product stops and the message Needs manual charging shows in the product display. Put the product in the charging station to charge the battery - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 37
button and is useful for quickly mowing an area where the grass has been mown less than in other parts of the yard. You must manually move the product to the chosen area. Spot cutting means that the product mows in a spiral pattern in order to cut the grass in the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 38
Product work capacity Automower® 310 Automower® 315 Automower® 315X Standby time, minimum hours per day 6 2 2 4.7.1 Example 1 This example is applicable to products with a specified work area of 1000 m2, but the principle is the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 39
possible to ensure proper contact between the product and the charging station. Refer to contact and charging plates in Product overview Automower® 310/315/315X on page 4 3. The display shows a message that charging is in progress. 4.9 Adjust the cutting height CAUTION: During the first weeks after - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 40
life, make sure to clean the product regularly and replace worn parts. All maintenance and servicing must be done according to Husqvarna's instructions. Refer to Warranty on page 58. When the product is first used, the blade disc and blades should be inspected once a week. If the amount - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 41
mowing result and low energy usage. All 3 blades and screws must be replaced at the same time to obtain a balanced cutting system. Use Husqvarna original blades embossed with the crowned H-mark logotype, refer to Technical data on page 55. 6. Remove the 3 blades. 7. Attach 3 new blades and screws - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 42
Take your product to your Husqvarna central service for service prior to winter storage. Regular winter service will maintain the product in good condition and create the best conditions for a new season without any disruptions. Service usually includes the following: • Thorough cleaning of the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 43
Troubleshooting 6.1 Introduction - troubleshooting In this chapter, faults and symptoms are described and can guide you if the product does not operate as expected. More suggestions for steps to take in the event of malfunction or symptoms can be found on www.husqvarna to the instructions. Refer to - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 44
and has been slipping. The work area includes a steep slope. The guide wire is not laid diagonally in the slope. Wheel motor over- Grass or cloth. If the problem stays speak to your authorized service technician. Enter the correct PIN code. Contact Husqvarna customer service if you forget the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 45
ground. The guide wire is not installed correctly. Check if the guide wire is installed according to the instructions. Refer to To install the guide wire on can cause the chassis to be lifted. If the problem stays speak to your authorized service technician. Wheel drive prob- Grass or other object - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 46
. Restart the product. If the problem stays speak to your authorized service technician. Check and change the settings if needed. Make sure that the product is not upside down or tilted. If the problem stays speak to your authorized service technician. 46 - Troubleshooting 1440 - 002 - 19.02.2020 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 47
from an island. Check that the boundary wire is laid according to instructions, e.g. in the right direction around the island. Refer to To make To create a New loop signal on page 25. If the problem stays speak to your authorized service technician. Cutting system im- Too few or too many blades. - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 48
is installed according to the instructions. Refer to To install the guide wire on page 22. Guide calibration The product has succeeded to calibrate No action. done the guide wire. Connection changed New loop signal successfully changed. No action. 48 - Troubleshooting 1440 - 002 - 19.02.2020 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 49
or flashing green light for a correct installation. If not, follow the instructions in the troubleshooting guide below. You can also find information on www.husqvarna.com. Speak to your Husqvarna customer service for more information. Light Cause Action Green solid light Green flashing light - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 50
Husqvarna customer service if you still cannot find the reason for the fault. Symptoms Cause Action The product has difficulty docking. The guide according to the instructions in To examine where to put the guide wire on page 19 The guide wire is not Troubleshooting 1440 - 002 - 19.02.2020 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 51
damage wire insulation. Damage to the insulation may not cause disruptions until several weeks or months later. To avoid this, 1440 - 002 - 19.02.2020 Troubleshooting - 51 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 52
coupler has been used. Please first check all known splices before further troubleshooting is done. A wire break can be located by gradually halving the to exchange all of the boundary wire between and the point where the guide wire is connected to the boundary wire (thick black line). b) If - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 53
of the wire remains which is the difference between a solid green light and a flashing blue light. Then follow instruction in step 5 below. 4. If indicator lamp still flashes blue in step 3 above: Put and back in their if the indicator lamp is green. 1440 - 002 - 19.02.2020 Troubleshooting - 53 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 54
on page 54. 7.3.1 To remove the battery CAUTION: Only remove the battery when you dispose the product. When you remove the warranty seal, the Husqvarna warranty is no longer applicable. 5. Lift the rear edge of the top section of the chassis. 6. Disconnect the cable from the main circuit board - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 55
min 70 Average charging time, min 60 Automower® 315 584 85 28-01, 584 85 28-02 584 85 28-03 Automower® 315X 584 85 28-01, 584 85 28-02 80000 Maximum Radio-frequency pow- - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 56
for boundary 15 wire, % Maximum length boundary wire, 800 / 2600 m / ft Maximum length guide loop8, m / ft 400 / 1300 Working capacity, m2 / yd2, +/- 1000 / 1196 20% Automower® 315 Automower® 315X 3 pivoted cutting blades 2300 2300 25 25 2-6 / 0.8-2.4 22 / 8.7 60 / 24 2-6 / 0.8-2.4 22 - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 57
IP-classification Robotic lawn mower Charging station Power supply Automower® 310 IPX4 IPX1 IPX4 Automower® 315 IPX4 IPX1 IPX4 Automower® 315X IPX4 IPX1 IPX4 Frequency Band Support Automower® Connect 2G Automower® Connect 3G Automower® Connect 4G GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 58
may only be used in compliance with the instructions in this Operator's Manual. This manufacturer's warranty does not affect warranty entitlements . If an error occurs with your Husqvarna product, please contact Husqvarna customer service for further instructions. Please have the receipt and the - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 59
489-19 V2.1.0 • ETSI EN 301 489-52 V1.1.1 • ETSI EN 301 511 V12.5.1 • ETSI EN 301 908-2 V11.1.1 For Husqvarna® Automower® 310, Husqvarna® Automower® 315 and Husqvarna® Automower® 315X equipped with Bluetooth® also: • ETSI EN 300 328 V2.1.1 • ETSI EN 301 489-17 V3.1.1 Huskvarna, 2020-02-01 Lars Roos - Husqvarna AUTOMOWER 315X with installation service | Owner Manual - Page 60
AUTOMOWER® is a trademark owned by Husqvarna AB. Copyright© 2020 HUSQVARNA. All rights reserved. www.husqvarna.com Original instructions 1142215-26 2020-03-03
EN, English
Operator's manual
HUSQVARNA AUTOMOWER
®
310/315/315X
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.