Husqvarna K 3000 Wet Owners Manual
Husqvarna K 3000 Wet Manual
 |
View all Husqvarna K 3000 Wet manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna K 3000 Wet manual content summary:
- Husqvarna K 3000 Wet | Owners Manual - Page 1
Operator′s manual K3000 K3000 Wet Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna K 3000 Wet | Owners Manual - Page 2
dry grass etc. WARNING! Kickbacks can be sudden, rapid and violent and can cause life threatening injuries. Read and understand the instructions in the manual about recycling this product, contact your municipality, your domestic waste service or the shop from where you purchased the product. Other - Husqvarna K 3000 Wet | Owners Manual - Page 3
is what on the power cutter - K3000? ......... 4 WHAT IS WHAT? What is what on the power cutter - K3000 Wet? .. 5 GENERAL SAFETY PRECAUTIONS Steps before using a new power cutter 6 Personal protective equipment 6 Machine′s safety equipment 7 SAFETY INSTRUCTIONS General safety warnings 9 Cutting - Husqvarna K 3000 Wet | Owners Manual - Page 4
WHAT IS WHAT? What is what on the power cutter - K3000? 1 Rear handle 2 Guard for the blade 14" 3 Cutting blade 4 Locking the axle 5 Front handle 6 Inspection covers 7 Power switch lock 8 Switch 9 Rating plate 10 Brush retainer 11 Carbon brushes 12 Guard for the blade 12" (Model version) 13 - Husqvarna K 3000 Wet | Owners Manual - Page 5
is what on the power cutter - K3000 Wet? 1 Rear handle 2 Guard for the blade 3 Water kit 4 Cutting blade 5 Locking the axle 6 Front handle 7 Inspection covers 8 Power switch lock 9 Switch 10 Water tap 11 Water connection with flow limiter 12 Rating plate 13 Brush retainer 14 Carbon brushes 15 Ground - Husqvarna K 3000 Wet | Owners Manual - Page 6
operator's manual carefully and make sure you understand the instructions before using the machine. • The machine is only designed for cutting hard materials, such as concrete, brick, masonry as well as cast iron and cement pipes. • Let your Husqvarna dealer regularly check the power cutter and make - Husqvarna K 3000 Wet | Owners Manual - Page 7
. This movement is controlled by two independent return springs. This position results in the machine stopping and the power switch being locked. contact your service agent. When you Checking the power switch lock buy any of our products we guarantee the availability of professional repairs and - Husqvarna K 3000 Wet | Owners Manual - Page 8
guard is fitted above the cutting blade and is designed to prevent parts of the blade or cutting fragments from being thrown towards the user. of damage. A damaged cutting blade can cause personal injury. See instructions under the heading Assembly. • Check that the guard is complete and without - Husqvarna K 3000 Wet | Owners Manual - Page 9
! The safety distance for the ! power cutter is 15 metres. You are responsible to ensure that animals and onlookers are not within the working area. Do not start cutting until the working area is clear and you are standing firmly. Electrical safety • Power tool plugs must match the outlet - Husqvarna K 3000 Wet | Owners Manual - Page 10
before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may power tool accidentally. • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power - Husqvarna K 3000 Wet | Owners Manual - Page 11
than that of the power cutter. Cutting blades Abrasive blades Diamond blades Rescue blade K3000 Yes Yes No K3000 Wet Yes* Yes No *Without water Cutting blades for different materials Ensure the blade it not cracked or damaged in any other way. Abrasive blades Diamond blades Concrete Metal - Husqvarna K 3000 Wet | Owners Manual - Page 12
as the user. When dry cutting, lift the blade out from the cut every 30-60 seconds and let it rotate in the air for 10 seconds to let it cool. Wet cutting with diamond blade (K3000 Wet) Water cooling, which is used when cutting concrete, cools the blade and increases its service life while also - Husqvarna K 3000 Wet | Owners Manual - Page 13
INSTRUCTIONS General working instructions the material to be cut. This reduces the temperature of the blade and ensures effective cutting. WARNING! This section describes basic ! safety directions for using a power cutter service agent or an experienced power cutter discs). • Support the work - Husqvarna K 3000 Wet | Owners Manual - Page 14
INSTRUCTIONS How to avoid kickback WARNING! Kickback can happen very ! suddenly and violently; kicking the power cutter and . The machine can be pulled down suddenly with a very powerful jerk. How to avoid pinching Support the work piece in such a way that the cut remains blade. 14 - English - Husqvarna K 3000 Wet | Owners Manual - Page 15
or assembly. Fitting the cutting blade Husqvarna's blades are approved for hand-held power cutters. Blades are manufactured with three different diameters new one, check the flange washers and the drive axle. See instructions under the heading Checking the drive axle and flange washers. Checking the - Husqvarna K 3000 Wet | Owners Manual - Page 16
-hand thumb and press in the power switch. K3000 Wet WARNING! The machine (Great Britain ! 120V) is not equipped with a ground fault circuit interrupter. The machine must always be used with an isolating transformer for protection in case an electrical fault should occur. Water connector - Husqvarna K 3000 Wet | Owners Manual - Page 17
with water, as water can enter the electrical system or the engine and cause damage to the machine or short circuit. • Unscrew the cable holding the carbon brush. Now lift up the spring and then lift out the carbon brush from the brush retainer. K3000 Wet WARNING! Do not use a high pressure - Husqvarna K 3000 Wet | Owners Manual - Page 18
parts must be dismantled to change the grease in the gear housing: 1 Flange washers holding the cutting blade 2 The sealing ring 3 Support gear setting. 1 Check that nuts and screws are tight. 2 Check that the power switch unit works smoothly. 3 Clean the outside of the machine. 4 Checking - Husqvarna K 3000 Wet | Owners Manual - Page 19
Engine Protection class Ground fault circuit interrupter TECHNICAL DATA K3000 K3000 Wet I I No Yes Rated voltage, V Europe - Yes Type "Gardena" 8 Noise emissions (see note 1) Sound power level, measured dB(A) Sound power level, guaranteed dB(A) 104 105 104 105 Sound levels (see note - Husqvarna K 3000 Wet | Owners Manual - Page 20
Cutting equipment TECHNICAL DATA Cutting blade, mm/inches 300/12 350/14 Max. peripheral speed, m/s 80 100 Max. blade speed, rpm 4500 Recommended cable dimensions Cable area Input voltage 100-120 V Input voltage 220-240 V 1,5 mm2 20 m 30 m 2,5 mm2 40 m 50 m 20 - English - Husqvarna K 3000 Wet | Owners Manual - Page 21
AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the power cutter Husqvarna K3000, K3000 Wet dating from 2010 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the serial number), complies with the requirements - Husqvarna K 3000 Wet | Owners Manual - Page 22
1153343-26 Original instructions ´´®®zz++UUBB@@¶¶6600¨¨ 2009-12-29
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
English
K3000
K3000 Wet
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.