Husqvarna K 760 Owners Manual

Husqvarna K 760 Manual

Get Husqvarna K 760 PDF manuals and user guides View all Husqvarna K 760 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna K 760 manual content summary:

  • Husqvarna K 760 | Owners Manual - Page 1
    Operator′s manual K 760 K760 Rescue Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna K 760 | Owners Manual - Page 2
    ! Kickbacks can be sudden, rapid and violent and can cause life threatening injuries. Read and understand the instructions in the manual before using the machine. WARNING! Sparks from the cutting blade can cause fire in combustible materials such as: petrol (gas), wood, dry grass etc. Explanation of
  • Husqvarna K 760 | Owners Manual - Page 3
    is what on the power cutter - K 760 Rescue? ..... 6 MACHINE´S SAFETY EQUIPMENT General 7 CUTTING BLADES General 9 Abrasive blades 9 Diamond blades 10 Toothed blades, carbide tipped blades and emergency situations 10 Transport and storage 10 ASSEMBLING AND ADJUSTMENTS General 11 Checking the
  • Husqvarna K 760 | Owners Manual - Page 4
    Rescue) Specially designed starter handle, with room for heavy gloves. Adjustable carry strap (K 760 Rescue) Adjustable carry strap for full freedom of movement. Chromium-plated blade guard (K 760 Rescue) Chromium-plated blade guard, visible in smoke and water spray, enhances control of the cutter
  • Husqvarna K 760 | Owners Manual - Page 5
    14 Muffler 15 Adjustment handle for guard 16 Guard for the blade 17 Decompression valve 18 Air purge 19 Fuel tank 20 Water connection with filter 21 Belt guard 22 Cutting arm 23 Rating plate 24 Belt tensioner 25 Cutting head 26 Cutting blade 27 Combination spanner 28 Operator′s manual English
  • Husqvarna K 760 | Owners Manual - Page 6
    power cutter - K 760 Rescue? 1 Front handle 2 Water tap 3 Warning decal 4 Air filter cover 5 Cylinder cover 6 Choke 7 Throttle lockout 8 Throttle control 9 Start throttle lock 10 Stop switch 11 Disconnection function for OilGuard (K760 OilGuard) 12 Starter handle 13 Starter 14 Muffler 15 Adjustment
  • Husqvarna K 760 | Owners Manual - Page 7
    • Start the power cutter and apply full throttle. Release the throttle control and check that the cutting blade stops and remains stationary. If the cutting blade rotates when the throttle is in the idle position you should check the carburettor's idle adjustment. See instructions in the section
  • Husqvarna K 760 | Owners Manual - Page 8
    system reduces the transfer of vibration between the engine unit/cutting equipment and the machine′s handle unit. The engine body, including the cutting equipment, is insulated from the handles by vibration damping units. WARNING! Never use a machine without a ! muffler, or with a faulty muffler
  • Husqvarna K 760 | Owners Manual - Page 9
    is used for the cutting blade to be fitted on the machine. See the instructions under the heading Assembling the cutting blade. Suitable cutting blades Cutting blades Abrasive blades Diamond blades Toothed blads K760 Yes* Yes No K 760 Rescue Yes* Yes Yes** *Without water **See instructions under
  • Husqvarna K 760 | Owners Manual - Page 10
    tipped specialty blades are intended only for use in rescue missions and only by trained staff. Transport and storage • Do not store or transport the power cutter with the cutting blade fitted. All blades should be removed from the cutter after use and stored carefully. • Store cutting blades in dry
  • Husqvarna K 760 | Owners Manual - Page 11
    guard must always be fitted on the machine. • Do not use warped, notched, indented or dirty flange washers. Do not use different dimensions of flange washers. Fitting the cutting blade • Husqvarna's blades are approved for hand-held power cutters. • Bushings can be fitted on the machine axle to adjust
  • Husqvarna K 760 | Owners Manual - Page 12
    stroke engines. K760 OilGuard • Use HUSQVARNA OilGuard two stroke oil. Mixing • Always mix the petrol and oil in a clean container intended for fuel. • Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining
  • Husqvarna K 760 | Owners Manual - Page 13
    : • If you have spilt fuel or engine oil on the machine. Wipe off the spill and allow the remaining fuel to evaporate. • If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water. • If the machine is
  • Husqvarna K 760 | Owners Manual - Page 14
    use of products such as ! cutters CAUTION! Sparks may appear service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance. Always use genuine accessories 14 - English
  • Husqvarna K 760 | Owners Manual - Page 15
    cutting equipment or be hit by parts if the blade breaks. • Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and can lead to dangerous conditions, e.g. slippery surfaces. • Never start to work with the power cutter
  • Husqvarna K 760 | Owners Manual - Page 16
    metal covered roof) should be conducted in a forward direction for best control. Cutting with toothed/carbide tipped blades during rescue operaions WARNING! A power cutter should never be ! used with carbide tipped blade for non- emergency work, such as in the construction trades. Be aware
  • Husqvarna K 760 | Owners Manual - Page 17
    power cutter. Kickback zone Never use the kickback zone of the blade for cutting. If the blade is pinched or stalled in the kickback zone, the reactive force will push the power cutter of cutting blades, see the section "Cutting blades". • For transport and storage of fuel, see the section "Fuel
  • Husqvarna K 760 | Owners Manual - Page 18
    is no fuel leakage. Risk of fire. • Perform daily maintenance. See instructions in the section "Maintenance". Starting • Decompression valve: Press in the valve to reduce the pressure in the cylinder, this is to assist starting the power cutter. The decompression valve should always be used when
  • Husqvarna K 760 | Owners Manual - Page 19
    apply full throttle to automatically disengage fast idle. Stopping CAUTION! The cutting blade continues to ! rotate up to a minute after the motor has stopped. (Blade coasting.) Make sure that the cutting blade can rotate freely until it is completely stopped. Carelessness can result in
  • Husqvarna K 760 | Owners Manual - Page 20
    Cleaning Monthly maintenance Cleaning Spark plug Fuel tank Functional inspection General inspection Throttle lockout* Stop switch* Guard for the blade* Cutting blade** Functional inspection Vibration damping system* Muffler* Drive belt Carburettor Starter *See instructions in the section "Machine
  • Husqvarna K 760 | Owners Manual - Page 21
    ! Use of the wrong spark plug can damage the piston/ cylinder. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. • An incorrect fuel mixture (too much or incorrect type of oil). • A dirty air filter. • Screw the adjuster screw
  • Husqvarna K 760 | Owners Manual - Page 22
    ensure the machine always receives the correct mixture of fuel and air. When the engine lacks power or accelerates poorly, do the following: • Check the air filter and replace if necessary. When this does not help, contact an authorised service workshop. Adjusting the idle speed CAUTION! If the idle
  • Husqvarna K 760 | Owners Manual - Page 23
    spring assembly on the starter. Tensioning the recoil spring • Guide the cord through the cut-out in the periphery of the pulley and wind the cord at least a further half turn. • Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring. Fitting the starter • To
  • Husqvarna K 760 | Owners Manual - Page 24
    operating disturbances caused by blockage of the fuel filter located inside the tank. Air filter The air filter only needs to be checked if the engine drops in power. • Loosen the screws. Remove the air filter cover. • Check the air filter and replace if necessary. Replacing the air filter NOTICE! The air
  • Husqvarna K 760 | Owners Manual - Page 25
    Manufacturer of ignition system Type of ignition system Spark plug Electrode gap, mm Fuel and lubrication system Manufacturer of carburettor Carburettor type Fuel tank capacity, litre Weight Power cutter without fuel and cutting blade, kg 12" (300 mm) 14" (350 mm) Noise emissions (see note 1) Sound
  • Husqvarna K 760 | Owners Manual - Page 26
    46-36-146500, declares under sole responsibility that the power cutters Husqvarna K 760, K 760 Rescue from 2009's serial numbers and onwards (the year 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according to Annex V. For information relating to
  • Husqvarna K 760 | Owners Manual - Page 27
  • Husqvarna K 760 | Owners Manual - Page 28
    Original instructions 1153355-26 ´´®®zz++UUCCTT¶¶66FF¨¨ 2009-12-29
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
English
K 760
K760 Rescue
Operator
′
s manual
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.