Husqvarna L221A Owner Manual

Husqvarna L221A Manual

Get Husqvarna L221A PDF manuals and user guides View all Husqvarna L221A manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna L221A manual content summary:

  • Husqvarna L221A | Owner Manual - Page 1
    Operator's manual L221A Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna L221A | Owner Manual - Page 2
    careful near corners, bushes, trees or other objects that block your view. General operation • Read, understand, and follow all instructions on the machine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. • Do not put
  • Husqvarna L221A | Owner Manual - Page 3
    run. • Disengage drive system, if so of trouble. parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. • Do not change the engine governor setting or overspeed the engine. • Maintain or replace safety and instruction
  • Husqvarna L221A | Owner Manual - Page 4
    levels. WARNING! ! WARNING! Used if there is a risk of serious injury or death for the operator or damage to the surroundings if the instructions in the manual are not followed. Stop the engine STOP IMPORTANT! ! IMPORTANT! Used if there is a risk of injury to the operator or damage to the
  • Husqvarna L221A | Owner Manual - Page 5
    Children 2 General operation 2 Slope operation 3 Safe handling of gasoline 3 General service 3 KEY TO SYMBOLS Key to symbols 4 Explanation of warning levels 4 CONTENTS Muffler 21 Spark plug 21 Air filter 21 Blade 22 Drive belt 24 TROUBLESHOOTING Troubleshooting schedule 26 English - 5
  • Husqvarna L221A | Owner Manual - Page 6
    the maintenance schedule in this manual. Any maintenance other than that described in this manual must be carried out by your servicing dealer (retailer). The Lawn / 32°F) Oil Capacity 16 Ounces Spark Plug (Gap: 0.0295'' / 0.75mm) BPR5ES Blade Bolt Torque 35-40 ft. Ibs. (47-54 Nm) 6 - English
  • Husqvarna L221A | Owner Manual - Page 7
    manual carefully. • Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly. • Fill with fuel and oil in the engine. See the instructions of this through your nearest authorized service center. operator's manual. WARNING! Long-term inhalation
  • Husqvarna L221A | Owner Manual - Page 8
    10 11 5 13 14 15 12 9 6 78 What is what on the lawn mower? 1 Operator presence control bar 2 Drive bail 3 Starter handle 4 Grass catcher 5 Fuel cap 6 Air filter 7 Spark plug 8 Drive cover 9 Muffler 10 Wash-out port 11 Rear deflector 12 Engine oil cap with dipstick 13 Cutting height control
  • Husqvarna L221A | Owner Manual - Page 9
    your machine fails any checks contact your service agent to get it repaired. Prevent blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade bar. The engine should stop and the drive should disengage. Inspecting the rear deflector •
  • Husqvarna L221A | Owner Manual - Page 10
    gasoline in the engine. Remove the lawn mower from the carton. • Remove loose parts included with mower. • Cut down two end corners of carton and lay end Roll the lawn mower out of the carton and make sure that no loose parts are left within the carton. Handle CAUTION! Take care not to damage the
  • Husqvarna L221A | Owner Manual - Page 11
    catcher Assembly of the catcher 1 Put the grass catcher frame into the grass bag with the rigid part of the bag on the bottom. Make sure the handle of the frame is outside of the starter handle until the starter rope can slip into the loop of the rope guide. 4 Tighten the T-knob. English - 11
  • Husqvarna L221A | Owner Manual - Page 12
    bag (if equipped). Filling with oil • The oil tank is empty at delivery. Fill oil to the FULL mark on the dipstick. Refer to the manual of the engine manufacturer for details. IMPORTANT! Do not overfill! 2 Close the back shield to allow the machine to discharge material to the left of
  • Husqvarna L221A | Owner Manual - Page 13
    oil level can cause serious damage to the engine. • See instructions in the section "Maintenance". • The engine oil should be of an engine while in storage. To avoid engine problems, the fuel system should be emptied before stor age Wash any part of your body that has come in contact with fuel.
  • Husqvarna L221A | Owner Manual - Page 14
    for example when fitting, inspecting or cleaning the blade. • Wear ear protectors to avoid damage to operator's manual carefully and make sure you understand the instructions before using instruction labels, as necessary. • Always disconnect the spark plug before performing maintenance or service
  • Husqvarna L221A | Owner Manual - Page 15
    service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions . A bent blade or engine shaft can result in an imbalance and heavy vibration, which results in a great risk of the blade becoming loose.
  • Husqvarna L221A | Owner Manual - Page 16
    • Always cut with a sharp blade for optimal results. A dull blade gives an uneven cut and the to an appropriate height. If the grass is really long, drive slowly and mow twice if necessary. MAX 1/3 • For in the Assembly and adjustments section of this manual. • Cover your unit with a suitable
  • Husqvarna L221A | Owner Manual - Page 17
    on the spark plug. • Add oil if necessary. See instructions under the heading Maintenance. • Add gasoline. See instructions in the section "Fuel handling". • Disengage drive system, if so equipped, before starting the engine (motor). Manual Start The operator presence control bar must be held
  • Husqvarna L221A | Owner Manual - Page 18
    service work described in this ! manual. More extensive work must be carried out by an authorized service workshop. Switch off the engine before carrying out any checks or maintenance. Stop the engine (motor) and wait until the blade under the drive cover*** X Check the drive belt / Pulleys***
  • Husqvarna L221A | Owner Manual - Page 19
    maintain mower as instructed in this manual. Some adjustments manual. • At least once a year, replace the spark plug, clean or replace air filter element and check blade drive wheel gear teeth. 4 Replace the wheels. If after cleaning, the drive wheels do not turn freely, contact a authorized service
  • Husqvarna L221A | Owner Manual - Page 20
    drive cover twice a season. • The gear cases are filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service Fill oil to the FULL mark on the dipstick. Refer to the manual of the engine manufacturer for details. IMPORTANT! Do not overfill! Check
  • Husqvarna L221A | Owner Manual - Page 21
    if conditions are exceptionally dusty. Follow the maintenance schedule in this manual. 1 Disconnect the spark plug wire from the spark plug. 2 every 100 hours of operation or every season, which ever occurs first. Service air cleaner more often under dusty conditions. • Remove the air filter cover
  • Husqvarna L221A | Owner Manual - Page 22
    work on it. Replacing the blades 1 Always disconnect the spark plug before performing maintenance or service. 2 Always empty the fuel tank instructions supplied with balancer. • Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not. • Slide blade
  • Husqvarna L221A | Owner Manual - Page 23
    and that the drive belt is inside the tab of the belt retainer. 2 The blade must be mounted instructions, you should consult an expert before continuing. Contact an authorized service workshop. Always use genuine parts. 4 Use block of wood between blade and lawn mower housing and tighten the blade
  • Husqvarna L221A | Owner Manual - Page 24
    11 Hardened washer 12 Lock washer 13 Blade bolt 14 Belt cover 10 12 11 13 Remove the drive belt • Empty the fuel tank by running the machine until the tank is empty. • Always disconnect the spark plug before performing maintenance or accessing mocable parts. • Turn lawn mower on its side. Make
  • Husqvarna L221A | Owner Manual - Page 25
    keeper. Make sure the new belt is inside the front belt keeper. • Reinstall drive cover. • Reattach cable to rear transmission and reattach return spring to rear insert / rear transmission belt keeper. • Reinstall rear insert. • Reinstall the blade. See instructions in the section "Replacing the
  • Husqvarna L221A | Owner Manual - Page 26
    Contact your service agent. See instructions under the heading Starting and stopping. Raise height of cut. Replace the blade Clean / Inspect Grass Catcher Raise height of cut. Empty the grass catcher Adjust handle height (if equippped) See instructions under the heading Replacing the drive belt. For
  • Husqvarna L221A | Owner Manual - Page 27
  • Husqvarna L221A | Owner Manual - Page 28
    Original instructions 115 93 79-27 2017-10-05
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
English
L221A
Operator’s manual
Please read the operator’s manual carefully and make sure you understand the instructions
before using the machine.