Husqvarna MZ 6128 Owners Manual

Husqvarna MZ 6128 Manual

Get Husqvarna MZ 6128 PDF manuals and user guides View all Husqvarna MZ 6128 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna MZ 6128 manual content summary:

  • Husqvarna MZ 6128 | Owners Manual - Page 1
    Operator Manual MZ6128 / 966502301 MZ28ZT BF / 966582501 FD52M / 966582601 FD61M / 966582701 Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna MZ 6128 | Owners Manual - Page 2
    altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the
  • Husqvarna MZ 6128 | Owners Manual - Page 3
    Starting the Engine 25 Jumper Cables 28 Running 29 Operating on Hills 30 Stopping the Engine 31 Mowing Tips 32 Manual Transport 33 MAINTENANCE 34 Battery 36 Safety System 37 Tire Pressures 37 Parking Brake 37 Deck Belt 38 Pump Belt 39 V-belts 39 Cutting Blades 40 Adjusting the Mower
  • Husqvarna MZ 6128 | Owners Manual - Page 4
    practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the
  • Husqvarna MZ 6128 | Owners Manual - Page 5
    accessories provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer's directions concerning operation, maintenance, and repairs must be carefully followed. Lawn mowers and all power equipment can be
  • Husqvarna MZ 6128 | Owners Manual - Page 6
    certificate in the Service Journal in this operator's manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number
  • Husqvarna MZ 6128 | Owners Manual - Page 7
    in the manual. Used also when there is a potential for misuse or misassembly. RN Reverse Neutral Fast Slow Fuel Warning! Parking Brake CE conformity marking. Only for European market Warning! Rotating blades, keep away from the discharge deck Do not touch parts Battery acid is
  • Husqvarna MZ 6128 | Owners Manual - Page 8
    Read Operator's Manual symbols and decals Shut off engine and remove key before performing any maintenance or repair and toes thrown objects Do not open or remove safety shields while engine is running Careful backing up, watch for other people Careful going forward, watch for
  • Husqvarna MZ 6128 | Owners Manual - Page 9
    unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. • Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard
  • Husqvarna MZ 6128 | Owners Manual - Page 10
    this Operation Manual. Local laws may regulate the age of the user. • Keep machine free of grass, leaves or other debris buildup which can touch the hot exhaust or engine parts and burn. Do not allow the mower deck to plow leaves or other debris, causing buildup to occur. • Clean any oil or fuel
  • Husqvarna MZ 6128 | Owners Manual - Page 11
    traction. • Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope. • Keep movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause machine to roll over. • Use
  • Husqvarna MZ 6128 | Owners Manual - Page 12
    watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before and while backing, look and down for small children. • Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with
  • Husqvarna MZ 6128 | Owners Manual - Page 13
    clothing immediately. • Never overfill fuel tank. Replace gas cap and tighten securely. • Do not start the engine near spilled fuel. • Never use gasoline as a cleaning agent. • If leaks arise in fuel system, engine must not be started until problem has been resolved. • Check the fuel level before
  • Husqvarna MZ 6128 | Owners Manual - Page 14
    with the engine running. • Check grass catcher components and the discharge guard frequently and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently
  • Husqvarna MZ 6128 | Owners Manual - Page 15
    . Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake's functionality regularly. Adjust and service as necessary. • The mulch blades should only be used in
  • Husqvarna MZ 6128 | Owners Manual - Page 16
    The parking brake is not sufficient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over. WARNING! This mower is equipped with an internal combustion engine and
  • Husqvarna MZ 6128 | Owners Manual - Page 17
    CONTROLS This operator's manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs & Stratton four-stroke overhead valve engine developing 28 horse power*. Control Locations 4 Transmission from the engine is made via belt-driven hydraulic pumps. Using the left and right
  • Husqvarna MZ 6128 | Owners Manual - Page 18
    moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from
  • Husqvarna MZ 6128 | Owners Manual - Page 19
    OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter cannot be manually reset. Tracking If the mower is not tracking straight, check the air pressure in both rear tires
  • Husqvarna MZ 6128 | Owners Manual - Page 20
    moving the mower. Parking brake Blade Switch To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully. Blade switch Ignition Switch The ignition key is placed on the control panel and is used to start and stop the engine. Turn the
  • Husqvarna MZ 6128 | Owners Manual - Page 21
    position when the engine has started. Ignition switch - RUN position For using "accessory", turn the key counter clockwise. 8058-046 Fuses Fuses are located on the left hand side of the machine. They are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles
  • Husqvarna MZ 6128 | Owners Manual - Page 22
    height pedal releases the deck lift to place the deck and the selected height. For transport, push the lift pedal fully forward until the deck lift latches in the valve is off when the handle tab is turned perpendicular to the fuel line. Lengthways adjustment 8011-441 Fuel shut off valve in
  • Husqvarna MZ 6128 | Owners Manual - Page 23
    of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional
  • Husqvarna MZ 6128 | Owners Manual - Page 24
    OPERATION Read the Safety Instructions section and the following pages if you are unfamiliar with the machine. Training Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities. We suggest that this section be reviewed in its entirety prior to
  • Husqvarna MZ 6128 | Owners Manual - Page 25
    started: 1. The blade switch for engaging the mower blades must be depressed. 2. The parking brake must be on. 3. Both steering controls must be in the locked (outer) neutral position. Activate parking brake before starting 8058-044 Starting the Engine 1. Sit on the seat. 2. Raise the mower deck
  • Husqvarna MZ 6128 | Owners Manual - Page 26
    OPERATION 4. Disengage the mower blades by depressing the blade switch. 5. Move the steering controls outward to the locked (outer) neutral position. Press the control for disengaging the mower deck 8058-043 6. Move the throttle to the middle position. Place controls in neutral position 80661-
  • Husqvarna MZ 6128 | Owners Manual - Page 27
    retrying. IMPORTANT INFORMATION The Briggs & Stratton engine on this unit is equipped with Electronic Fuel Management (EFM). The engine choke is automatically regulated during starting and warm up. Turn to the START position 9. When the engine starts, immediately release the ignition key back to
  • Husqvarna MZ 6128 | Owners Manual - Page 28
    of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery. • Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery. To remove cables, reverse order • Remove BLACK cable first from chassis and
  • Husqvarna MZ 6128 | Owners Manual - Page 29
    the parking brake will shut off the engine. 2. Move the steering controls to the neutral position (N). Parking brake 3. Select blades. 8058-044 WARNING! Ensure that no one is near mower when engaging blade switch. Cutting height selection 5. Engage the mower deck by pulling out the blade switch
  • Husqvarna MZ 6128 | Owners Manual - Page 30
    Driving on Slopes in the Safety Instructions. WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. • The slowest speed possible should be used before starting up or down hills. • Avoid stopping or changing speed on hills. • If stopping is
  • Husqvarna MZ 6128 | Owners Manual - Page 31
    stopping. To prevent fouling the spark plugs, avoid idling the engine for longer periods. 1. Disengage the mower deck by depressing the blade switch. 8058-046 Disengage the mower deck and move throttle to minimum 2. Raise the mower deck by pressing the foot pedal forward to the transport position
  • Husqvarna MZ 6128 | Owners Manual - Page 32
    water on top surface, engine and electrical components. • When the mulching kit is used, it is important that the mowing interval is frequent and that the deck is cleaned more often. WARNING! Clear the lawn of stones and other objects that can be thrown out by the blades. Mowing pattern 8011-603b
  • Husqvarna MZ 6128 | Owners Manual - Page 33
    ignition key removed • the parking brake activated 2 1 When pushing or pulling the mower, engage the IZT (Integrated Zeroturn Transaxle) bypass linkages. The linkages are located on each side of the rear of the unit below the rear engine plate. Raise the deck to the highest (transport) position
  • Husqvarna MZ 6128 | Owners Manual - Page 34
    Start the engine and blades, listen for unusual sounds Check for damage Thoroughly clean around the engine Clean around belts, belt pulleys Check the tire pressures Check battery connections Sharpen3)/ Replace mower blades Clean the engine's cooling air intake 2) Clean the air cleaner's pre-filter
  • Husqvarna MZ 6128 | Owners Manual - Page 35
    to the engine manufacturer's manual WARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to "OFF" position and remove the key. • Make sure the blades and all moving parts have
  • Husqvarna MZ 6128 | Owners Manual - Page 36
    maintenance Battery Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • See chart for charging
  • Husqvarna MZ 6128 | Owners Manual - Page 37
    can only be started when: 1. The mower deck is disengaged. 2. The steering controls are in the outer, locked neutral position. 3. The parking brake is on. Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the
  • Husqvarna MZ 6128 | Owners Manual - Page 38
    around the cutter housings and entire deck surface. 4. Carefully roll the belt over the top of the cutter housing pulleys. 5. Remove the belt from around the electric clutch on the engine shaft and off the mower deck. Slackening the belt tensioner 8058-063 Deck Belt Installation NOTE: For ease in
  • Husqvarna MZ 6128 | Owners Manual - Page 39
    Pump Belt The belts are not adjustable. Replace belts if they begin to slip from wear. Replacing Pump Belt Park the mower on a level surface. Engage the parking brake. Belt Removal From the top side of the deck: 1. Remove the deck belt (see Deck Belt Removal in this section of the manual). 2. Tilt
  • Husqvarna MZ 6128 | Owners Manual - Page 40
    any service or adjustment checklist: 1. Engage the parking brake. 2. Place the Blade switch in the disengaged position. 3. Turn ignition switch to "OFF" position and remove the key. 4. Make sure the blades and all moving parts have completely stopped. 5. Disconnect the spark plug wire from
  • Husqvarna MZ 6128 | Owners Manual - Page 41
    leveling procedure, mower deck drive belt must be installed prior to leveling deck. 1. Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner. 2. Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain
  • Husqvarna MZ 6128 | Owners Manual - Page 42
    position 1½ to 3" (38 to 76 mm) grass. • Middle position 3" to 4½" (76 to 114 mm) grass. • Lower position 4½" to 6" (114 to 152 mm) grass. The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck. Anti-scalp rollers IMPORTANT INFORMATION The anti
  • Husqvarna MZ 6128 | Owners Manual - Page 43
    If wheels do not rotate freely, take the unit to the dealer for service. Hardware Check daily. Inspect the entire machine for loose or missing hardware. Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine's life-span. Make it a habit to clean the machine
  • Husqvarna MZ 6128 | Owners Manual - Page 44
    gun Oil change Filter change Level check * Change hydraulic drive filters. p See Engine Manufacturer's manual General Remove belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced
  • Husqvarna MZ 6128 | Owners Manual - Page 45
    is forced out. Front Wheel Bearings Lubricate 3-4 strokes with a grease gun on each set of wheel bearings. Lubricating front wheels Deck Spindles Lower the cutting deck completely. If a grease gun without rubber hose is used, the foot plate must be removed. Lubricate with a grease gun, 2-3 strokes
  • Husqvarna MZ 6128 | Owners Manual - Page 46
    base surface and apply a film of new oil to the gasket of the replacement filter. 4. Install the new filter by hand, turning it threequarters to one full turn after the filter gasket contacts the filter base surface. 5. Reinstall the filter guard. Torque screws to 65 in/lbs. each. 6. Repeat steps
  • Husqvarna MZ 6128 | Owners Manual - Page 47
    under normal operating conditions. 1. Disengage the brake if activated. 2. With the bypass valve open and the engine running at fast idle, slowly move the directional control in both forward and reverse directions (5 or 6 times). As air is purged from the unit, the oil level will drop. 3. With the
  • Husqvarna MZ 6128 | Owners Manual - Page 48
    Problem Engine will not start. troubleshooting guide Cause • Blade switch is engaged. • Steering controls are not locked in the neutral position. • Parking brake is not activated. • Battery is dead. • Contamination in the carburetor or fuel line. • Fuel supply is closed. • Clogged fuel filter or
  • Husqvarna MZ 6128 | Owners Manual - Page 49
    in hydraulic system. Mower deck not engaging. • Drive belt for the mower deck has come loose. • Contact for the electromagnetic coupling has loosened. • The blade switch is faulty or has come loose, from the cable contact. • The fuse has blown. Hydraulic drive leaks oil. • Damaged seals, housing
  • Husqvarna MZ 6128 | Owners Manual - Page 50
    layer of oil on the underside of the mower deck to avoid corrosion. 2. Inspect the machine for worn or damaged parts and tighten any nuts or screws that may have become loose. 3. Change the engine oil; dispose of properly. 4. Empty the fuel tanks or add a fuel stabilizer. Start the engine and allow
  • Husqvarna MZ 6128 | Owners Manual - Page 51
    WIRING DIAGRAM 51 SOLENOID YEL NOTES: 1. SEAT UNOCCUPIED 2. BRAKE SWITCH IN OFF POSITION 3. MOTION CONTROL LEVERS OUT 4. PTO IN OFF POSITION RIGHT MOTION CONTROL LEVER YEL LEFT MOTION CONTROL LEVER YEL BRN BRN GRN BRAKE SWITCH GRN WHT WHT YEL TO ENGINE PIGTAIL PUR GRY RED/BLK RED/BLK B
  • Husqvarna MZ 6128 | Owners Manual - Page 52
    Brakes Front caster tires, smooth tread Rear tires, turf pneumatic Tire pressures MZ6128 / 966502301 Briggs & Stratton 1) ELS 28 HP 2) Pressure w/ Oil Filter Min 87 octane unleaded (Max ethyl alcohol 10%, Max MTBE 15%) 5 gallons / 9 liters Air cooled 12v 15 amp @ 3600 rpm Electric ZT-3400 Hydro
  • Husqvarna MZ 6128 | Owners Manual - Page 53
    Sprung Seat Hinged Arm Rests Hour Meter Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base Machine Height Base Machine Width Overall Width, Chute Up Overall Width, Chute Down TECHNICAL DATA MZ6128 / 966502301 61" (155 cm) 1"-4½" (2.5-11.4 cm) 0 3 21" / 53.3 cm
  • Husqvarna MZ 6128 | Owners Manual - Page 54
    Uncut Circle Number of Blades Blade Length Nose Roller Blade Engagement Deck Construction Productivity TECHNICAL DATA FD52M / 966582601 52" (132 cm) 1"-4½" (2.5-11.4 cm) 0 3 18" / 46 cm Yes 200 ft-lb Warner 11 gauge fabricated 3.5 acres/h / 14,167 m2/h FD61M /966582701 61" (155 cm) 1"-4½" (2.5-11
  • Husqvarna MZ 6128 | Owners Manual - Page 55
    TECHNICAL DATA Torque Specifications Hex Head Cap Screws The torque values shown should be used as a general guideline when specific torque values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut Shank Size (Diameter in inches, fine or
  • Husqvarna MZ 6128 | Owners Manual - Page 56
    emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents. CE requirements The Declaration of Conformity is included in the literature packet. 56
  • Husqvarna MZ 6128 | Owners Manual - Page 57
    of oil is in the engine. 6. Adjust the position of the steering controls. 7. Fill with fuel and open the fuel shut off valve. 8. Start the engine. 9. Check that there is drive to both wheels. 10. Check the mower deck adjustment. 11. Check: Safety switch for the parking brake. Safety switch for
  • Husqvarna MZ 6128 | Owners Manual - Page 58
    After 10 hours 1. Change the engine oil. 2. Change the oil filter. 3. Check hydraulic oil level. 4. Inspect hydraulic hoses. 5. Inspect hydraulic belt 6. Inspect hydraulic filter. 7. Check neutral position. 8. Check safety system. 9. Check seat belt. 10. Check fuel system for leaks. 11. Inspect
  • Husqvarna MZ 6128 | Owners Manual - Page 59
    from mower. 2. Check engine oil level. 3. Check the tire pressures. 4. Check underside of deck. 5. Inspect deck pulleys. 6. Check/clean the engine's cooling air intake. 7. Check safety system. 8. Check seat belt. 9. Check fuel system for leaks. 10. Inspect safety guards and shields. 11. Check brake
  • Husqvarna MZ 6128 | Owners Manual - Page 60
    JOURNAL Action 25-Hour Service 1. Check the fuel pump's air filter. 2. Sharpen/Replace mower blades if required. 3. Check the tire pressures. 4. Check battery with cables. 5. Lubricate according to lubrication chart. 6. Check/clean the engine's cooling air intake. 7. Clean the air cleaner's pre
  • Husqvarna MZ 6128 | Owners Manual - Page 61
    Check the tire pressures 7. Change the engine oil and filter 8. Change air filter 9. Inspect spark plug 10. Inspect fuel filter 11. Check engine RPM 12. Clean underside of deck 13. Check blade pitch 14. Grease blade spindles 15. Inspect spindle bearings 16. Inspect deck belt and blades 17. Inspect
  • Husqvarna MZ 6128 | Owners Manual - Page 62
    fuel filter 11. Check engine RPM 12. Clean underside of deck 13. Check blade pitch 14. Grease blade spindles 15. Inspect spindle bearings 16. Inspect deck belt and blades 17. Inspect idler arm bearings 18. Inspect deck idler pulleys 19. Change hydraulic oil 20. Change hydraulic filter 21. Replace
  • Husqvarna MZ 6128 | Owners Manual - Page 63
    year 1. Clean the engine's cooling air intake. 2. Replace the air cleaner's pre-filter (foam). 3. Replace the air filter's paper cartridge. 4. Change the engine oil. 5. Replace the engine oil filter 6. Check/adjust the cutting height 7. Check/adjust the parking brake 8. Clean/Change the spark plugs
  • Husqvarna MZ 6128 | Owners Manual - Page 64
    P/N 115 361027R1 02/25/10
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
English
Operator Manual
MZ6128 / 966502301
MZ28ZT BF / 966582501
FD52M / 966582601
FD61M / 966582701
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.