Husqvarna P-ZT5224 Owners Manual

Husqvarna P-ZT5224 Manual

Get Husqvarna P-ZT5224 PDF manuals and user guides View all Husqvarna P-ZT5224 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna P-ZT5224 manual content summary:

  • Husqvarna P-ZT5224 | Owners Manual - Page 1
    P-ZT4822FS / 966613301 P-ZT6126FS / 966613501 P-ZT26FS BF / 966613701 P-ZT5224FS / 966613401 P-ZT6128BS / 966613601 P-ZT4822FS CARB / 966663801 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Form Number 115 392427R1 10/19/10
  • Husqvarna P-ZT5224 | Owners Manual - Page 2
    specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to
  • Husqvarna P-ZT5224 | Owners Manual - Page 3
    Service 6 Manufacturing Number 6 SYMBOLS AND DECALS 7 SAFETY 9 Safety Instructions Hills 32 Stopping the Engine 33 Mowing Tips 34 Manual Transport 35 MAINTENANCE 36 Battery 38 Safety System 39 Fluid Change 48 TROUBLESHOOTING GUIDE 49 STORAGE 51 Winter Storage 51 Service 51 WIRING
  • Husqvarna P-ZT5224 | Owners Manual - Page 4
    operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must
  • Husqvarna P-ZT5224 | Owners Manual - Page 5
    manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service towing. Never allow children or others in or on the towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop. Do
  • Husqvarna P-ZT5224 | Owners Manual - Page 6
    by your retailer. See the certificate in the Service Journal in this operator's manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This manual belongs to the machine with the manufacturing number: Manufacturing
  • Husqvarna P-ZT5224 | Owners Manual - Page 7
    this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. Used in this publication to notify the
  • Husqvarna P-ZT5224 | Owners Manual - Page 8
    symbols and decals Read Operator's Manual Shut off engine and remove key before performing any maintenance or repair work Keep a safe distance from the machine Use on slopes no greater than
  • Husqvarna P-ZT5224 | Owners Manual - Page 9
    safety. General Operation • Read, understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near in place and working • Slow down before turning. • Never leave a running machine unattended. Always turn off blades, set parking brake, stop
  • Husqvarna P-ZT5224 | Owners Manual - Page 10
    injury. • Follow the manufacturer's recommendation for wheel weights or counterweights. • Anyone who operates this machine must first read and understand this Operation Manual. Local laws may regulate the age of the user. • Keep machine free of grass, leaves or other debris buildup which can touch
  • Husqvarna P-ZT5224 | Owners Manual - Page 11
    that you will not have to stop while on the slope. • Do not mow on wet grass. Tires may lose traction. • Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope. • Keep movement on the slopes slow and gradual
  • Husqvarna P-ZT5224 | Owners Manual - Page 12
    path of danger. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Never carry children, even with the
  • Husqvarna P-ZT5224 | Owners Manual - Page 13
    not start the engine near spilled fuel. • Never use gasoline as a cleaning agent. • If leaks arise in fuel system, engine must not be started until problem has been resolved. • Check the fuel level before each use and leave space for the fuel to expand, as the heat from the engine and
  • Husqvarna P-ZT5224 | Owners Manual - Page 14
    . • Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently. Adjust and service as required. • Maintain or replace safety and instruction labels, as necessary. • Do not modify safety equipment. Check regularly to be sure it
  • Husqvarna P-ZT5224 | Owners Manual - Page 15
    and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake's functionality regularly. Adjust and service as necessary. • The mulch blades should only be used in familiar areas when higher quality mowing is desired. • Reduce the risk of fire
  • Husqvarna P-ZT5224 | Owners Manual - Page 16
    cautious when it is loaded on or unloaded from a vehicle or trailer. • Use an approved trailer to transport the machine. Activate the parking brake, turn off the fuel supply, and fasten the machine with approved fastening devices, such as bands, chains, or straps, when transporting. • Do not operate
  • Husqvarna P-ZT5224 | Owners Manual - Page 17
    : 2822 lbs/1283 kg. • Read machine's operator manual before each use. • Securely fasten the seat belt if to ride. • Operate the mower smoothly - no jerky turns, starts or stops. • When mower is stopped, set is NOT intended for use in sub zero temperatures. WARNING! The rollover protection system's
  • Husqvarna P-ZT5224 | Owners Manual - Page 18
    CONTROLS This operator's manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs & Stratton or Kawasaki four-stroke overhead valve engine. Transmission from the engine is made via belt-driven hydraulic
  • Husqvarna P-ZT5224 | Owners Manual - Page 19
    moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from
  • Husqvarna P-ZT5224 | Owners Manual - Page 20
    will come on and shut off automatically. The hour meter cannot be manually reset. Tracking Knob If the mower is not tracking straight, check the throttle and the full forward position on both motion control levers. Gradually turn in the tracking bolt on the right hand side until the unit noticeably
  • Husqvarna P-ZT5224 | Owners Manual - Page 21
    . Blade switch Ignition Switch The ignition switch is placed on the control panel and is used to start and stop the engine. Push in and turn the key clockwise to start the engine. Ignition switch 21 8065-006 8065-084 8050-780
  • Husqvarna P-ZT5224 | Owners Manual - Page 22
    CONTROLS Release the key to the RUN position when the engine has started. For using "accessory", turn the key clockwise. Ignition switch - RUN position 8050-781 Ignition switch - accessory 8050-848 22
  • Husqvarna P-ZT5224 | Owners Manual - Page 23
    CONTROLS Fuses Fuses are located on the right hand side of the machine. They are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles. There are three fuses with ratings and functions: 1. 20 A, Primary fuse. 2. 7.5 A, Mower deck coupling. 3. 10 A, Accessories
  • Husqvarna P-ZT5224 | Owners Manual - Page 24
    are located on each side of the rear of the unit below the rear engine plate. The bypass linkage is used when manual pushing or pulling the unit. See Manual Transport in the Operation section. 8065-010 Gas model fuel shut off valve in the CLOSED position. Right side, ZT linkage 8065
  • Husqvarna P-ZT5224 | Owners Manual - Page 25
    the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel
  • Husqvarna P-ZT5224 | Owners Manual - Page 26
    Instructions section and the following pages if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. This section should be reviewed push the mower (see Manual Transport in the Operation section)
  • Husqvarna P-ZT5224 | Owners Manual - Page 27
    . WARNING! The seat belt must be used when the roll bar is in upright position. Before Starting 1. Read the sections Safety Instructions and Controls before starting the machine. 2. Perform the daily maintenance before starting (see maintenance schedule in the Maintenance section). 3. Check that
  • Husqvarna P-ZT5224 | Owners Manual - Page 28
    OPERATION Starting the Engine 1. Sit on the seat. 2. Raise the mower deck to the transport position by setting the lift pedal fully forward. 3. Activate the parking brake. Set mower deck to the transport position 4. Disengage the mower blades by depressing the blade switch. 8065-087 5. Move the
  • Husqvarna P-ZT5224 | Owners Manual - Page 29
    . Do not use the machine in enclosed spaces. Set the throttle and choke 8. Open the fuel tank valve for the selected tank. 9. Press in and turn the ignition key to the start position. IMPORTANT INFORMATION Do not run the starter for more than 5 seconds each time. If the engine does not
  • Husqvarna P-ZT5224 | Owners Manual - Page 30
    OPERATION Weak Battery WARNING! Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. IMPORTANT INFORMATION The mower is equipped with a 12-volt negative grounded system. The other vehicle must
  • Husqvarna P-ZT5224 | Owners Manual - Page 31
    OPERATION Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 2. Move the steering
  • Husqvarna P-ZT5224 | Owners Manual - Page 32
    move throttle to full. 8065-084 Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety Instructions. WARNING! Do not drive up or down hills with slopes greater than forward to regain forward motion. • Make all turns slowly. 32 Release the parking brake 8065-096 8065-006
  • Husqvarna P-ZT5224 | Owners Manual - Page 33
    the foot pedal forward to the transport position. • When the machine is standing still, activate the parking brake by pulling the lever upward. • Turn the ignition key to the stop position. • Move the steering controls outward. Raise deck to transport position • Remove ignition key. To prevent
  • Husqvarna P-ZT5224 | Owners Manual - Page 34
    OPERATION Mowing Tips • Observe and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it until the desired mowing result is attained. The average lawn should be cut to 2½" (64 mm) during the cool season and over 3" (76 mm) during the hot months.
  • Husqvarna P-ZT5224 | Owners Manual - Page 35
    OPERATION Manual Transport WARNING! No adjustments or maintenance should be carried out unless: • the engine stopped • the ignition key removed • the parking brake activated 2 1 When pushing or
  • Husqvarna P-ZT5224 | Owners Manual - Page 36
    with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine manufacturer
  • Husqvarna P-ZT5224 | Owners Manual - Page 37
    workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine manufacturer's manual WARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to "OFF
  • Husqvarna P-ZT5224 | Owners Manual - Page 38
    is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type the battery to lose power. 1. Lift the seat and rotate fully forward until supported by the seat rod. 2. Loosen the two wingnuts attached to the side "J" bolts
  • Husqvarna P-ZT5224 | Owners Manual - Page 39
    one of the conditions is not met. Change the conditions and try again. If the machine starts when one of these conditions is not met, turn the machine off and repair the safety system before using the machine again. Make sure the engine stops when the park brake is not engaged
  • Husqvarna P-ZT5224 | Owners Manual - Page 40
    relieve the tension on the belt. 4. Carefully roll the belt over the top of the cutter housing pulleys. 5. Remove the belt guide hardware with a ½" wrench and set belt guide aside. 6. Remove the belt from around the electric clutch on the engine shaft. Release the belt tension 8065-040 Deck Belt
  • Husqvarna P-ZT5224 | Owners Manual - Page 41
    not have any twist. Correct if needed. 5. Adjust belt tension by turning the eyebolt until there is approximately 7/8" -1" of threads showing outside Remove the deck belt (see Deck Belt Removal in this section of the manual). 2. Remove clutch stop to access the belt. 3. Disconnect clutch wire. 4.
  • Husqvarna P-ZT5224 | Owners Manual - Page 42
    bent or cracked when hitting obstacles. Let the service workshop decide whether a blade with large nicks can cloth when handling. 1. Remove blade bolt by turning counterclockwise. 2. Install new or resharpened blade with bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use
  • Husqvarna P-ZT5224 | Owners Manual - Page 43
    drive belt must be installed prior to leveling the deck. 1. Wear heavy gloves. Turn each outer blade tip to align the deck in a side-to-side manner. or down until both side-to-side measurements are equal. Record measurement. 3. Turn both outer blades to align with the deck in front-to-rear manner.
  • Husqvarna P-ZT5224 | Owners Manual - Page 44
    Do not adjust the rollers to support the deck. Rollers are properly adjusted not adjust the rollers to support the deck. Anti-scalp rollers IMPORTANT INFORMATION To avoid deck must not be adjusted to support the deck. 8065-094 61 Nm), then back nut off ½ turn. NOTE: Tire should rotate freely but axle spacers
  • Husqvarna P-ZT5224 | Owners Manual - Page 45
    attempting a warranty repair must have prior approval before conducting maintenance of a Hydro-Gear® product, unless the servicing dealer is a current Authorized Hydro-Gear Service Center. Regular external maintenance of the ZT-3400 Powertrain™ should include the following: 1. Check oil level in
  • Husqvarna P-ZT5224 | Owners Manual - Page 46
    Lubrication Schedule LUBRICATION 8065-095 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Filter change Level check * Change hydraulic drive filters. p Change engine oil every 50 hours. General Remove the ignition key to prevent unintentional movements
  • Husqvarna P-ZT5224 | Owners Manual - Page 47
    LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a grease gun until the grease is forced out around the top
  • Husqvarna P-ZT5224 | Owners Manual - Page 48
    filter base surface and apply a film of new oil to the gasket of the replacement filter. 4. Install the new filter by hand, turning it threequarters to one full turn after the filter gasket contacts the filter base surface. 5. Reinstall the filter guard. Torque screws to 65 in/lbs. each. 6. Repeat
  • Husqvarna P-ZT5224 | Owners Manual - Page 49
    troubleshooting guide Problem Engine will not start. Cause • Blade switch is engaged. • in the wrong position. • Clogged fuel filter or fuel line. • Faulty ignition system. Starter does not turn the engine over. • Dead battery. • Poor contacts on the battery terminal cable connections. • Fuse
  • Husqvarna P-ZT5224 | Owners Manual - Page 50
    Problem Machine vibrates. Engine overheats. troubleshooting guide Cause • Blades are loose. • Blades are incorrectly balanced. • Engine is loose. • Clogged air intake or cooling fins. • Engine overloaded. • Poor ventilation around engine. • Defective engine
  • Husqvarna P-ZT5224 | Owners Manual - Page 51
    about a tablespoon of engine oil into the cylinder. Turn over the engine so that the oil is evenly distributed Service When ordering spare parts, please specify the purchase year, model, type, and serial number. Always use genuine Husqvarna spare parts. An annual check-up at an authorized service
  • Husqvarna P-ZT5224 | Owners Manual - Page 52
    WIRING DIAGRAM TIMER SCHEMATIC 52
  • Husqvarna P-ZT5224 | Owners Manual - Page 53
    TECHNICAL DATA Torque Specifications Hex Head Cap Screws The torque values shown should be used as a general guideline when specific torque values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut Shank Size (Diameter in inches, fine or
  • Husqvarna P-ZT5224 | Owners Manual - Page 54
    pneumatic Tire pressures P-ZT4822FS / 966613301 P-ZT4822FS CARB / 966663801 P-ZT5224FS / 966613401 Kawasaki 1) Kawasaki 10.5 4 ply 15 PSI / 103 kPa / 1 bar 1) See the Engine Manufacturer's manual for engine specifications. 2) The power rating of the engines indicated is the average net power
  • Husqvarna P-ZT5224 | Owners Manual - Page 55
    Machine Height Base Machine Width Overall Width, Chute Up Overall Width, Chute Down Overall Height, ROPS Up TECHNICAL DATA P-ZT4822FS / 966613301 P-ZT4822FS CARB / 966663801 48" (122 cm) 1"-5½" (2.5-14 cm) 0 3 16¼" / 41.3 cm 4 adjustable Suspension Yes Yes 150 ft-lb Ogura 11 gauge 3.8 acres/h / 15
  • Husqvarna P-ZT5224 | Owners Manual - Page 56
    0-11 mph - 0-17.7 Km/h 0-6 mph - 0-9.7 Km/h Internal Cog 13 x 6.5 4 ply 23 x 10.5 4 ply 15 PSI / 103 kPa / 1 bar 1) See the Engine Manufacturer's manual for engine specifications. 2) The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production
  • Husqvarna P-ZT5224 | Owners Manual - Page 57
    Frame Cutting Width Cutting Height Uncut Circle Number of Blades Blade Length Anti-Scalp Rollers Seat Hinged Arm Rests Hour Meter Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base Machine Height Base Machine Width Overall Width, Chute Up Overall Width, Chute
  • Husqvarna P-ZT5224 | Owners Manual - Page 58
    emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents. 58
  • Husqvarna P-ZT5224 | Owners Manual - Page 59
    high idle speed Inform the customer about: The need and advantages of following the service schedule The need and advantages of leaving the machine for service The effects of service and maintaining a service journal on the machine's resale value Application areas for mulching Fill in the sales
  • Husqvarna P-ZT5224 | Owners Manual - Page 60
    SERVICE JOURNAL Action After 10 hours Change the engine oil Change the oil filter Inspect hydraulic hoses Inspect hydraulic belt Inspect hydraulic filter Check neutral position
  • Husqvarna P-ZT5224 | Owners Manual - Page 61
    JOURNAL Action Daily Service Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the engine's cooling air
  • Husqvarna P-ZT5224 | Owners Manual - Page 62
    JOURNAL Action 50-Hour Service Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the engine's cooling air
  • Husqvarna P-ZT5224 | Owners Manual - Page 63
    JOURNAL Action 250-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect frame Inspect throttle and choke cables Inspect hardware Check the tire pressures Change the engine
  • Husqvarna P-ZT5224 | Owners Manual - Page 64
    JOURNAL Action 500-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect frame Inspect throttle and choke cables Inspect hardware Check the tire pressures Change the engine
  • Husqvarna P-ZT5224 | Owners Manual - Page 65
    SERVICE JOURNAL Action At Least Once Each Year Clean the engine's cooling air intake Replace the air cleaner's pre-filter (foam) Replace the air filter's paper
  • Husqvarna P-ZT5224 | Owners Manual - Page 66
    Action SERVICE JOURNAL Date, mtr reading, stamp, sign 66
  • Husqvarna P-ZT5224 | Owners Manual - Page 67
  • Husqvarna P-ZT5224 | Owners Manual - Page 68
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
P-ZT4822FS / 966613301
P-ZT5224FS / 966613401
P-ZT6126FS / 966613501
P-ZT6128BS / 966613601
P-ZT26FS BF / 966613701
P-ZT4822FS CARB / 966663801
Please read the operator manual carefully and make sure
you understand the instructions before using the machine.
Operator Manual
Form Number 115 392427R1
10/19/10