Husqvarna RZ3016 Owners Manual

Husqvarna RZ3016 Manual

Get Husqvarna RZ3016 PDF manuals and user guides View all Husqvarna RZ3016 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna RZ3016 manual content summary:

  • Husqvarna RZ3016 | Owners Manual - Page 1
    for use in this machine.The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Operator Manual RZ3016 / 966612301 RZ3016 CA / 966612302 RZ3019 BF / 966582101 Please read the operator's manual carefully and make sure you understand the instructions before using the
  • Husqvarna RZ3016 | Owners Manual - Page 2
    prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the manufacturer
  • Husqvarna RZ3016 | Owners Manual - Page 3
    Tips 30 Stopping the Engine 31 Moving Machine By Hand 32 MAINTENANCE 33 Maintenance Schedule 33 Battery 35 Safety System 36 Tire Pressures 36 Parking Brake 37 V-belts 37 Deck Belt 37 EZT Belt 38 Cutting Blades 38 Blade Replacement 38 Adjusting the Mower Deck 39 Leveling Deck 39
  • Husqvarna RZ3016 | Owners Manual - Page 4
    practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the
  • Husqvarna RZ3016 | Owners Manual - Page 5
    dealer for service. General In this operator's manual, left and right, backward and forward are used in relation to the machine's normal driving direction. Continuous dedication to improve our products require that specifications and design are subject to change without notice. Driving and Transport
  • Husqvarna RZ3016 | Owners Manual - Page 6
    Service Journal in this operator's manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This Operator's Manual and serial number available when ordering spare parts. The engine's manufacturing number is stamped on one of
  • Husqvarna RZ3016 | Owners Manual - Page 7
    publication to notify the reader of a risk of material damage, particularly if the reader should neglect to follow instructions given in the manual. Used also when there is a potential for misuse or misassembly. RN Reverse Neutral Fast Slow Choke Fuel Warning! Parking Brake CE
  • Husqvarna RZ3016 | Owners Manual - Page 8
    safety shields while engine is running Careful backing up, watch for other people Careful going forward, watch for other people Moving sharp blades under cover Battery acid is corrosive, explosive and flammable Warning! Rotating blades, keep away from the discharge deck Do not touch parts 8
  • Husqvarna RZ3016 | Owners Manual - Page 9
    safety devices in place and working • Slow down before turning. • Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. 8011-512 Read the operator's manual before starting the machine Clear the area of objects before
  • Husqvarna RZ3016 | Owners Manual - Page 10
    free of grass, leaves or other debris buildup which can touch hot exhaust or engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause buildup to occur. Clean any oil or fuel spillage before operating or storing the machine. • Allow machine to cool before
  • Husqvarna RZ3016 | Owners Manual - Page 11
    driving. • Always wear gloves when handling the blades. • Never wear loose clothing that can get caught in moving parts. • Use Tall grass can hide obstacles. • Choose a low ground speed so that you will not have , or turning on a slope. If the tires lose traction, disengage the blades and proceed
  • Husqvarna RZ3016 | Owners Manual - Page 12
    before operating a riding lawn mower. Keep children out of turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Never carry children, even with the blades children to operate the machine. • Use extra care when approaching blind corners,
  • Husqvarna RZ3016 | Owners Manual - Page 13
    , change clothing immediately. • Never overfill fuel tank. Replace gas cap and tighten securely. • Do not start the engine near spilled fuel. • Never use gasoline as a cleaning agent. • If leaks arise in fuel system, engine must not be started until problem has been resolved. • Check the fuel level
  • Husqvarna RZ3016 | Owners Manual - Page 14
    frequently and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently. Adjust and service as required. • Maintain or replace safety and instruction labels
  • Husqvarna RZ3016 | Owners Manual - Page 15
    the manufacturer. Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake's functionality regularly. Adjust and service as necessary. • The mulch blades should only be
  • Husqvarna RZ3016 | Owners Manual - Page 16
    damage to the drive system. • Load the unit onto truck or trailer by driving up ramps of suitable strength using a slow speed through an authorized Husqvarna dealer. 16 WARNING! Escaping hydraulic oil under pressure This mower is equipped with an internal combustion engine and should not be used on
  • Husqvarna RZ3016 | Owners Manual - Page 17
    CONTROLS This operator's manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs & Stratton four-stroke overhead valve engine. Transmission from the engine is made via belt-driven Control Locations hydraulic pumps. Using the left and right steering controls, the flow is
  • Husqvarna RZ3016 | Owners Manual - Page 18
    its neutral position. The rotation direction when zero turning is determined by which steering control is moved backward behind the neutral position. If the left steering control is pulled backward, the machine turns to the left. Use extra care when using this maneuver. If the steering controls are
  • Husqvarna RZ3016 | Owners Manual - Page 19
    the blades. In order to increase or decrease the engine speed, the control is moved forward or back respectively. Avoid idling the engine for long periods, as there is a risk of fouling the spark plugs. USE FULL THROTTLE WHEN MOWING, for best mower performance and battery charging. Ignition Switch
  • Husqvarna RZ3016 | Owners Manual - Page 20
    To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or
  • Husqvarna RZ3016 | Owners Manual - Page 21
    minor bump in the lawn. IMPORTANT INFORMATION Always use the high position (F) to transport. Tracking If the mower is not tracking straight, and level concrete or blacktop surface. If the unit still does not track straight contact your Husqvarna workshop for adjustments. The mower deck's lifting
  • Husqvarna RZ3016 | Owners Manual - Page 22
    the lever up and into the the lock notch. WARNING! No adjustments or maintenance to be carried out unless: • the engine stopped • the ignition key removed • the parking brake activated 8058-074 Mower deck blade control lever in the disengaged position Bypass Linkages When pushing or pulling the
  • Husqvarna RZ3016 | Owners Manual - Page 23
    steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. This section should be reviewed in its entirety prior to attempting to move the mower under its own power. When first operating the mower or until becoming comfortable with controls, use a reduced throttle
  • Husqvarna RZ3016 | Owners Manual - Page 24
    the sections Safety Instructions and Controls before Engine 1. Sit on the seat. 2. Raise the mower deck by pulling the lifting lever upward to the transport position (F). 3. Activate the parking brake. Start conditions Raise the mower deck 4. Disengage the mower blades by lowering the blade
  • Husqvarna RZ3016 | Owners Manual - Page 25
    to the locked (outer) neutral position. 6. Move the throttle to the middle position. Place controls in neutral position 8050-028 Set the throttle 7. If the engine is cold, the choke control should be pushed forward to the choke position. Choke control 8050-008 8050-007 25
  • Husqvarna RZ3016 | Owners Manual - Page 26
    position. 11. Slowly push the choke control down when the engine has started. IMPORTANT INFORMATION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying. Turn to START position Release ignition to the RUN position 26
  • Husqvarna RZ3016 | Owners Manual - Page 27
    be a 12-volt negative grounded system. Do not use your mower to start other vehicles. If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.) If jumper cables are used for emergency starting, follow this procedure: Jumper cables 1. Connect
  • Husqvarna RZ3016 | Owners Manual - Page 28
    the machine turns to the right. Turning on the spot (zero turn) can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. 28 Mower deck's lifting lever 8058-085 8058-075 Mower blade control lever
  • Husqvarna RZ3016 | Owners Manual - Page 29
    Read the Safety Instructions Driving on Slopes in the Safety Instructions. WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. • The slowest speed possible should be used before starting up or down hills. • Avoid stopping or changing speed on
  • Husqvarna RZ3016 | Owners Manual - Page 30
    Make sure the mower is cooled and the engine is off. • Use compressed air to clean top surface of the deck. Avoid flooding water on top surface, engine and electrical components. • When the mulching kit is used, it is important that the mowing interval is frequent. WARNING! Clear the lawn of stones
  • Husqvarna RZ3016 | Owners Manual - Page 31
    stop the engine. 5. Move the steering controls outward. 6. Remove the key. Always remove key when leaving the mower to prevent unauthorized use. IMPORTANT INFORMATION Leaving the ignition switch in any other position than OFF will cause the battery to be discharged. Raise the mower deck with the
  • Husqvarna RZ3016 | Owners Manual - Page 32
    OPERATION Moving Machine By Hand When pushing or pulling the mower, be sure to engage the EZT Hydrogear bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard. 1. Raise the deck into the highest cutting position. 2. Pull the EZT bypass linkages out
  • Husqvarna RZ3016 | Owners Manual - Page 33
    hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) For daily use, the machine should be lubricated twice weekly. 4) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = See engine manufacturers' Owners Manual 33
  • Husqvarna RZ3016 | Owners Manual - Page 34
    Check the condition of belts, belt pulleys Change the engine oil 1) Replace the engine oil filter Clean/replace the spark plugs Check the caster wheels (every 200 hours) Check/adjust the mower deck Check the engine valve clearance 4) Perform the 300-hour service 4) Lubricate according to Lubrication
  • Husqvarna RZ3016 | Owners Manual - Page 35
    or checking level of electrolyte is not necessary. Always use two wrenches for the terminal screws. Always use protective glasses when handling the battery. STANDARD BATTERY STATE OF CHARGE APPROXIMATE BATTERY CHARGING TIME* TO FULL CHARGE AT 80OF / 27OC Maximum Rate at: 50 Amps 30 Amps 20
  • Husqvarna RZ3016 | Owners Manual - Page 36
    one of these conditions is not met, turn the machine off and repair the safety system before using the machine again. Make sure the engine stops when the park brake is not engaged and the operator leaves the seated position. Check that the engine stops if the mower blades are engaged and the driver
  • Husqvarna RZ3016 | Owners Manual - Page 37
    operation of parking brake Deck Belt To replace deck belt Deck belt removal. 1. Park on a level surface. Apply park brake. 2. Lower the deck to the lowest cutting position. 3. Disengage the clutch by sliding the blade control lever downwards. Disengage clutch to replace deck belt 8050-005 8058
  • Husqvarna RZ3016 | Owners Manual - Page 38
    EZT Belt To replace EZT belt Park the mower on a level surface. Engage the park brake. EZT belt removal NOTE: Be careful not to damage the fan blades on the EZT as this can affect cooling or damage the EZT. 1. Remove the deck belt (see To Replace Deck Belt in this section of the manual). 2. Create
  • Husqvarna RZ3016 | Owners Manual - Page 39
    Adjusting the Mower Deck MAINTENANCE WARNING! Before performing any service or adjustment checklist: 1. Engage the parking brake. 2. Place the Blade switch in the disengaged position. 3. Turn ignition switch to OFF position and remove the key. 4. Make sure the blades and all moving parts have
  • Husqvarna RZ3016 | Owners Manual - Page 40
    the top side of mower deck. For cleaning the underside of the deck, use the cleanout port. Attach the quick connect (from the accessory packet) to any garden hose. After mowing, snap the hose to the cleanout port and turn on water. Restart the mower and engage the blades to use the spinning action
  • Husqvarna RZ3016 | Owners Manual - Page 41
    with grease gun Oil change Filter change Level check 8050-924 General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be filled with engine oil. When lubricating with grease, unless otherwise stated, use a high grade
  • Husqvarna RZ3016 | Owners Manual - Page 42
    gun, one zerk, 2-3 strokes. Use only good quality bearing grease. Transmission The transmission is maintenance free with no need for level checks or oil changes. If a leak occurs, replace the unit or contact your Husqvarna dealer. 8050-009 8050-027 Lubricating the deck spindle after removing the
  • Husqvarna RZ3016 | Owners Manual - Page 43
    TROUBLESHOOTING Problem Engine will not start Starter does not turn the engine over Engine runs rough Cause • Blade lever is engaged • Steering controls are not locked in neutral position • Driver is not sitting in driver's seat • Parking brake is not activated • Battery is dead • Contamination in
  • Husqvarna RZ3016 | Owners Manual - Page 44
    gears slack or has come off • Defective hydraulic system • Air in hydraulic system Mower deck not engaging • Drive belt for the mower deck has come loose • Contact for the electromagnetic coupling has loosened • Blade switch is faulty or has come loose, from the cable contact • Fuse has blown
  • Husqvarna RZ3016 | Owners Manual - Page 45
    up damage to the paint and spray a thin layer of oil on the underside of the mower deck to avoid corrosion. 2. Inspect the machine for worn or damaged parts and tighten any nuts or screws that may have become loose. 3. Change the engine oil; dispose of properly. 4. Empty the fuel tanks or add a fuel
  • Husqvarna RZ3016 | Owners Manual - Page 46
    SCHEMATIC 46
  • Husqvarna RZ3016 | Owners Manual - Page 47
    Engine crankshaft bolt Deck pulley bolts Lug nuts Blade SCREWS The torque values shown should be used as a general guideline when specific torque values are not given. Flangelock Screw w/Flangelock Nut Size ft./lbs Nm ft./lbs Nm ft./lbs Nm Shank Size (Diameter in inches, fine
  • Husqvarna RZ3016 | Owners Manual - Page 48
    on the operating speed, environmental conditions and other variables. 2) For engine specifications, refer to the engine manufacturer's Owner Manual. 966612301, 966612302 Briggs & Stratton Intek 16.5 hp 1,2) Pressure with oil filter Min 86 octane unleaded (Maxethanol 5%, Max MTBE 15%) 3 gallons / 11
  • Husqvarna RZ3016 | Owners Manual - Page 49
    armrests Blade engagement Deck construction Productivity Output Overall dimensions Weight Base machine length Base machine width Base machine height Overall width, chute up Overall width, chute down TECHNICAL DATA 966582101 30" 1½" - 4" / 2.5 cm - 10.6 cm 2 29½" / 75 cm Standard No Manual Stamped
  • Husqvarna RZ3016 | Owners Manual - Page 50
    the machine will fulfill the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as
  • Husqvarna RZ3016 | Owners Manual - Page 51
    for the parking brake. The safety switch for the mower deck. The safety switch in the seat. The safety switch in the steering controls. Parking brake functionality. Driving forward. Driving backward. Engaging the blades. Check the idle speed Check the engine high idle speed Inform the customer
  • Husqvarna RZ3016 | Owners Manual - Page 52
    Action After 5-10 Hours Change the engine oil SERVICE JOURNAL Date, mtr reading, stamp, sign q Action 25-Hour Service Check the fuel pump's air filter Sharpen/Replace mower blades if required Check the tire pressures Check battery cables Lubricate according to lubrication chart Check/clean the
  • Husqvarna RZ3016 | Owners Manual - Page 53
    /adjust the parking brake Date, mtr reading, stamp, sign q q q q q Action 100-Hour Service Perform the 25-hour service Perform the 50-hour service Change the engine oil filter Clean/replace the spark plugs Replace the fuel filter Check V-belts Check tighten caster wheel axle bolts (every 200 hours
  • Husqvarna RZ3016 | Owners Manual - Page 54
    JOURNAL Action 300-Hour Service Perform the 25-hour service Perform the 50-hour service Perform the 100-hour service Check/adjust the mower deck Clean the combustion chamber and grind the valve seats Check the engine valve clearance Replace the air cleaner's pre-filter (foam) Date, mtr reading
  • Husqvarna RZ3016 | Owners Manual - Page 55
  • Husqvarna RZ3016 | Owners Manual - Page 56
    115 383627 Rev D www.husqvarna.com 2011-12-13
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
RZ3016
/
966612301
RZ3016 CA
/
966612302
RZ3019 BF
/
966582101
Operator Manual
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
Gasoline containing up to 10% ethanol
(E10) is acceptable for use in this
machine.The use of any gasoline
exceeding 10% ethanol (E10) will void
the product warranty.