Husqvarna S427 Operation Manual

Husqvarna S427 Manual

Get Husqvarna S427 PDF manuals and user guides View all Husqvarna S427 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna S427 manual content summary:

  • Husqvarna S427 | Operation Manual - Page 1
    Operator Manual S427 / Log Splitter 967 33 42-01 / 27 Ton Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10%
  • Husqvarna S427 | Operation Manual - Page 2
    the instructions, contact the nearest Husqvarna dealer for assistance. To locate the nearest Husqvarna dealer, go to www.husqvarna.com. Before Operating the Unit 1. Make sure all assembly has been properly completed. 2. Understand all safety precautions provided in the manuals. 3. Review control
  • Husqvarna S427 | Operation Manual - Page 3
    5 CONTROLS 8 OPERATION 9 MAINTENANCE 15 STORAGE 17 TROUBLESHOOTING 18 SPECIFICATIONS 19 INTRODUCTION This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate the machine
  • Husqvarna S427 | Operation Manual - Page 4
    particularly if the reader should neglect to follow instructions given in the manual. Used in this publication to notify the parts. Moving parts can cut or crush Keep children and others away while operating. Only one person should load logs and operate the log splitter Operate the log splitter
  • Husqvarna S427 | Operation Manual - Page 5
    completed. • Understand all safety instructions provided in the manual. • Review control functions and operation of the log splitter who has not read the operator manual or has not been instructed on the safe use of the splitter. • Do not use log splitter for any purpose other than splitting logs
  • Husqvarna S427 | Operation Manual - Page 6
    parts can cut or crush body parts. • When loading a ram-type log splitter, place your hands on the sides of the log not at the ends. Never place your hands or any part of your body between a log and any part of the log splitter. • On ram-type log splitters passing cardboard or wood over the suspected
  • Husqvarna S427 | Operation Manual - Page 7
    parts. • ALWAYS maintain unit in safe operating condition. A damaged or worn out muffler can cause fire or explosion. • If your log splitter spark arrester muffler, clean and inspect it regularly (follow manufacturer's service instructions). Replace, if damaged. • Never store the equipment with fuel
  • Husqvarna S427 | Operation Manual - Page 8
    unit thoroughly. See engine manual for proper storage. • ALWAYS remove spark plug wire from spark plug before inspecting or working on this unit. • DO NOT touch unit parts which might be hot from operation. Allow parts to cool before attempting to maintain, adjust or service. • Stop and inspect
  • Husqvarna S427 | Operation Manual - Page 9
    18 19 16 4 3 13 17 20 1. Draw Bar 2. Front Stand 3. Hitch Coupler 2" 4. Hydraulic Cylinder 5. Stripper Plate 6. Control Valve 7. Control Lever 8. Splitter Wedge 9. Beam 10. Log Cradle 11. End Plate/Grip 12. Fuel Tank and Cap 13. Safety Chains 14. Hydraulic Pump 15. Recoil Starter 16. Hydraulic
  • Husqvarna S427 | Operation Manual - Page 10
    OPERATION WARNING! To avoid injury, read and understand the entire Safety section before proceeding. Fuel Shut-off Valve IMPORTANT The fuel shut-off valve MUST be in the closed position before transporting the unit. 1 The valve is OFF when the handle tab is turned perpendicular to the fuel line
  • Husqvarna S427 | Operation Manual - Page 11
    contacts the stripper plates. 3. Continue to retract the cylinder until the log is dislodged from the splitter wedge. 4. Once removed from the splitter wedge rotate log and split from a different location or split log from the other end. Extend/Down - Move lever in this direction to extend cylinder
  • Husqvarna S427 | Operation Manual - Page 12
    vertical position. 1. Remove hair pin from upper lock pin and slide lock pin out of brackets. 2. Insert lock pin through brackets and through splitter beam to lock beam in vertical position. 3. Reinstall hairpin. Work Position Vertical To move beam to horizontal position: 4. Set the rear stablilzer
  • Husqvarna S427 | Operation Manual - Page 13
    (91 RON). High altitude use may require a different octane. Consult your engine manual. • Gasoline with up to 10% ethanol (gasohol) or up to 15% gasoline is not the same. If the engine experiences starting or performance problems after using a new gasoline, switch to a different fuel provider or
  • Husqvarna S427 | Operation Manual - Page 14
    before operating the unit. Tire Pressure See Specifications for tire pressure. CAUTION! Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly: • Do not attempt to mount a tire without the proper equipment and experience to perform the job. • Do not
  • Husqvarna S427 | Operation Manual - Page 15
    before attaching the hitch coupler to the ball. 5. Cross unit safety chains under the coupler and attach to tow vehicle. Work Site Set up log splitter in an area that provides: • a dry level surface. • good footing that is free of debris or other tripping hazards. • sufficient clearance for engine
  • Husqvarna S427 | Operation Manual - Page 16
    end plate with the squarest end toward the splitter edge. (c) Position hands on sides of logs when placing logs on unit and not on the end. Never place hands or any part of the body between a log and any part of the log splitter. (d) Do not attempt to stabilize logs with legs or feet while operating
  • Husqvarna S427 | Operation Manual - Page 17
    the life of unit. The following chart shows the recommended service schedule. Interval Each Use Task Clean unit Check tires Check Oil System. Perform scheduled engine maintenance. Refer to Engine Manual for detailed instructions. Check all fasteners. Replace fasteners that are missing or
  • Husqvarna S427 | Operation Manual - Page 18
    penetrate skin and result in serious injury or death. Be sure to stop the engine and relieve hydraulic pressure before doing any work on hydraulic parts. Keep body and hands away from pin holes or nozzles which expel hydraulic fluid when under pressure. Use paper or cardboard, not hands, to search
  • Husqvarna S427 | Operation Manual - Page 19
    Changing Hydraulic Oil and Filter NOTE: Change the hydraulic oil and oil filter every season or 100 hours. 1. Clean area around hydraulic supply hose. 2. Place container under oil filter and hydraulic supply hose to catch oil. 3. Remove hose clamp and disconnect hose from hydraulic tank. Hydraulic
  • Husqvarna S427 | Operation Manual - Page 20
    system for storage: 1. Add fuel stabilizer according to manufacturer's instructions. 2. Run engine for at least ten minutes after adding stabilizer of ignition. Removal From Storage 1. Refer to the engine service manual to prepare the engine for service. 2. Put fresh, clean fuel in the fuel tank.
  • Husqvarna S427 | Operation Manual - Page 21
    TROUBLESHOOTING Problem Engine will not start Probable Cause Correction Engine switch in lever position Engine overheats Faulty engine Debris accumulated on engine and cooling fins See your Husqvarna dealer Clean debris from engine and cooling fins Cylinder does not extend or retract when
  • Husqvarna S427 | Operation Manual - Page 22
    System Capacity Splitting Force Cylinder Cycle Time Bed Capacity: Log Length Length: Horizontal Position Width Height Length: Vertical XT775 173 cc 3600±100 7.75 1.3 pt / .6 ltrs or Refer to Engine Manual 1.2 qt / 1.1 ltrs Refer to Engine Manual 4.5 gal / 17 ltrs 27 ton / 24494 kg 17 sec 25 in / 63
  • Husqvarna S427 | Operation Manual - Page 23
  • Husqvarna S427 | Operation Manual - Page 24
    www.husqvarna.com 115 73 91-27 Rev B 2014-11-30
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
S427 /
Log Splitter
967 33 42-01 / 27 Ton
Please read the operator manual carefully and make sure
you understand the instructions before using the machine.
Gasoline containing up to 10% ethanol (E10) is acceptable
for use in this machine. The use of any gasoline
exceeding 10%
ethanol (E10) will void
the product warranty.
Operator Manual
EN