IBM 84885BU User Manual - Page 113
correctly.
View all IBM 84885BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Note: See "System replaceable units" on page 131 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 2462 (Video configuration error) 1. Video adapter (if installed) 2. System board. 5962 (IDE CD-ROM drive configuration error) 1. Run the Configuration/Setup Utility program. 2. CD-ROM drive. 3. CD-ROM power cable. 4. IDE cable. 5. System board. 6. Battery. 8603 (Pointing-device error) 1. Pointing device 2. System board 00012000 (Machine check architecture error.) 1. Microprocessor 2. System board. 00019502 (Microprocessor 1 failed) 1. Microprocessor 2. System board 00019xxx (Microprocessor x not functioning) 1. Verify microprocessor x is installed correctly. 2. Microprocessor x. 3. VRM, if installed. 4. System board. 00151200 (Unrecoverable error, microprocessor x reported IERR) 1. Microprocessor x 2. VRM 3. System board 00180100 (No room for PCI option ROM) 1. Run the Configuration/Setup Utility program. 2. Failing adapter. 3. System board. 00180200 (No more I/O space available for PCI adapter.) 1. Run the Configuration/Setup Utility program. 2. Adapter. 3. System board. 00180300 (No more memory above 1MB for PCI adapter.) 1. Run the Configuration/Setup Utility program. 2. Adapter. 3. System board. 00180400 1. Run the Configuration/Setup Utility program. (No memory below 1 MB for PCI adapter.) 2. Adapter. 3. System board. 00180500 (PCI option ROM checksum error.) 1. PCI adapter. 2. System board. 00180600 1. Run the Configuration/Setup Utility program. (PCI device BIST failure. PCI bridge error.) 2. Adapter. 3. System board. 00180700 (PCI device not responding.) 1. PCI adapter. 2. System board. Chapter 6. Symptom-to-FRU index 103