IBM 84885BU User Manual - Page 40
Bezel, Removing, bezel
View all IBM 84885BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Bezel This section provides information about removing and installing the front bezel. Removing the bezel When working with some devices, such as additional optical drives, you must first remove the bezel to access the device. Complete the following steps to remove the bezel: 1. Unlock the side-cover lock. 2. Remove the side cover (see "Removing the side cover" on page 28). 3. For hot-swap hard disk drive models, slide the lock bar to the left. 4. Locate the bezel-release lever; then, press the bezel-release lever toward the front of the server. 5. Pull the top of the bezel away from the chassis; then, push the bezel down to disengage the bottom tabs. 6. Remove the bezel from the server and store the bezel in a safe place. Release tab Bezel Openings Tab Hooks For instructions for replacing the bezel, see "Replacing the bezel" on page 31. 30 xSeries 226 Type 8488 and 8648: Hardware Maintenance Manual and Troubleshooting Guide