IBM 84885BU User Manual - Page 70
Completing, installation
View all IBM 84885BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3. Make sure the power-supply handle is in the open position; then, slide the power supply all the way into the chassis before placing the power-supply handle into the locked position. 4. If the server is not on, turn on the server. 5. Verify that the dc power LED and the ac power LED on the power supply are lit, indicating that the power supply is operating properly. Completing the installation To complete the installation, you must reinstall the bezel (see "Replacing the bezel" on page 31), reinstall the frame-support bracket (see "Removing and installing the support bracket" on page 32), reinstall the side cover (see "Replacing the side cover" on page 29), connect all the cables and, for certain options, run the Configuration/Setup Utility program. 60 xSeries 226 Type 8488 and 8648: Hardware Maintenance Manual and Troubleshooting Guide