IBM 84885BU User Manual - Page 80
CD-ROM, drive
View all IBM 84885BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
CD-ROM drive Before you begin: v Read Appendix B, "Safety information," on page 143. v Review the information in "System reliability guidelines" on page 25. To remove the CD-ROM drive, complete the following steps: 1. Turn off the server, if it is on. 2. Disconnect the power cord from the power source and from the server; then, disconnect all external cables. 3. Remove the side cover (see "Removing the side cover" on page 28). 4. Remove the front bezel (see "Removing the bezel" on page 30). 5. Disconnect the CD-ROM drive connector and power cables from the rear of the drive. 6. Press the blue touch point on the raised area of the CD-ROM drive cage and gently slide the CD-ROM drive toward the front of the server. 7. Lift the CD-ROM drive out of the server. For instructions for replacing the CD-ROM drive, see "Installing a drive in bay 2" on page 38. 70 xSeries 226 Type 8488 and 8648: Hardware Maintenance Manual and Troubleshooting Guide