IBM 867372X User Manual
IBM 867372X Manual
 |
View all IBM 867372X manuals
Add to My Manuals
Save this manual to your list of manuals |
IBM 867372X manual content summary:
- IBM 867372X | User Manual - Page 1
ERserver xSeries 305 Type 8673 Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 2
- IBM 867372X | User Manual - Page 3
ERserver xSeries 305 Type 8673 Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 4
Note Before using this information and the product it supports, read Appendix C, "Notices" on page 121. Third Edition (August 2002) © Copyright International Business Machines Corporation 2002. All rights reserved. US Government Users Restricted Rights - Use, - IBM 867372X | User Manual - Page 5
.ibm.com/ and click Support & downloads. In the Technical support keyword search field, type 8673 and click Go. A list of publications for your server is displayed. Important safety information Be sure to read all caution and danger statements in this book before performing any of the instructions - IBM 867372X | User Manual - Page 6
rations décrites par les instructions. Lesen Sie alle Sicherheitshinweise support You can download the most current diagnostic, BIOS flash, and device driver files from http://www.ibm.com/pc/support on the World Wide Web. iv xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 7
Contents About this manual iii Important safety information iii Online support iv Chapter 20 ServerGuide error symptoms 20 Small computer system interface messages 21 Diagnostic Troubleshooting the Ethernet controller 27 Network connection problems 27 Ethernet controller troubleshooting - IBM 867372X | User Manual - Page 8
Ethernet port connector 48 Cabling the server 48 Chapter 5. Removing and installing FRUs (service only 51 Removing the cover 51 Thermal grease 52 Removing and replacing a microprocessor Diagnostic error codes 65 vi xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 9
information from the World Wide Web 85 Software service and support 86 Hardware service and support 86 Appendix B. Related service information 87 Safety information 87 General safety 87 Electrical safety 88 Safety inspection guide 89 Handling electrostatic discharge-sensitive devices 90 - IBM 867372X | User Manual - Page 10
viii xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 11
Wide Web. Related publications This Hardware Maintenance Manual and Troubleshooting Guide is provided in PDF on the IBM xSeries Documentation CD. It contains information to help you solve the problem yourself or to provide helpful information to a service technician. In addition to this Hardware - IBM 867372X | User Manual - Page 12
Guide This publication is provided in PDF on the IBM xSeries Documentation CD. It contains instructions to install, remove, and connect optional devices supported by your server. Depending on your server model, additional publications might be included on the IBM Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 13
ECC SDRAM, registered DIMMs only v Slots: Four dual inline v Supports 256 MB, 512 MB, and 1 GB DIMMs Drives: v Diskette: 1.44 MB v CD-ROM: IDE v Supports up to two slim-high hard disk drives Expansion bays: Expansion which a large number of computers will operate. Chapter 1. General information 3 - IBM 867372X | User Manual - Page 14
from the diskette drive. Power-control button: Press this button to turn the server on and off manually. USB 2 Connector: Connect a USB device to this connector. USB 1 Connector: Connect a USB error has occurred. 4 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 15
Rear view The following illustration shows the LEDs on the rear of the server. Ethernet 2 link LED (green) Ethernet 2 activity LED (green) Ethernet 1 activity LED (green) Ethernet 1 link LED (green) Ethernet 2 link LED (green): When this green LED is lit, it indicates that the speed of the - IBM 867372X | User Manual - Page 16
on the front of the server is lit. Turning off the server Complete the following steps to manually turn off the server: 1. Review the information in "Important safety information" on page iii 2. of the server. Statement 5: 6 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 17
CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected - IBM 867372X | User Manual - Page 18
8 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 19
is a workgroup-hardware-management tool that you can use to centrally manage xSeries servers; IBM NetVista™, IntelliStation®, and ThinkPad® computers; and non-IBM Intel-microprocessor-based systems. IBM Director automates tasks such as inventory-taking, monitoring of environmental sensors (such as - IBM 867372X | User Manual - Page 20
Guide for instructions IBM Remote Supervisor Adapter is installed. Attention: If you set an administrator password and then forget it, there is no way to change, override, or remove it. You must replace the system board. 10 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 21
have, start the ServerGuide Setup and Installation CD and view the online overview. Not all features are supported on all server models. The ServerGuide program requires a supported IBM server with an enabled startable (bootable) CD-ROM drive. In addition to the ServerGuide Setup and Installation - IBM 867372X | User Manual - Page 22
. Non-Plug and Play adapters or non-IBM adapters might require switch settings, additional device drivers, and installation after the operating system is installed. See the documentation that comes with the adapter. 12 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 23
starts. (You will need your operating-system CD to complete the installation.) 2. The ServerGuide program stores information about the server model, service processor, hard disk drive controllers, and network adapters. Then, the program checks the CD for newer device drivers. This information is - IBM 867372X | User Manual - Page 24
the following steps to download the latest operating-system installation instructions from the IBM Support Web page: 1. Go to http://www.ibm.com/pc/support/. 2. Under Browse, click Servers. 3. From the cannot be changed. 14 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 25
or to format a SCSI device. Select a device from the list and read the instructions on the screen carefully before making a selection. If you press Ctrl+A before a options are supported by the integrated Ethernet controller and by adapters such as the IBM 10/100/1000 Ethernet Adapter and the IBM 10/ - IBM 867372X | User Manual - Page 26
4.1x or later. The controller supports the following teaming options: v Adapter fault tolerance (AFT) provides automatic redundancy for Ethernet controllers. It supports from two to four controllers per FEC capability. 16 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 27
troubleshooting information to help you resolve some common problems that might occur with your server. If you cannot locate and correct the problem 69. 4. If the computer stops and no error is displayed, go to "Undetermined problems" on page 77. 5. For power supply problems, see "Power checkout" - IBM 867372X | User Manual - Page 28
diagnostic programs. 9. Check for the following responses: v One beep. v Readable instructions or the main menu. 003 DID YOU RECEIVE BOTH OF THE CORRECT RESPONSES? NO a problem, see "Undetermined problems" on page 77. 18 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 29
beep codes and messages to indicate successful test completion or the detection of a problem. See "POST" for more information. v Error log The POST error log for your IBM products, go to the following addresses on the Web: - http://www.ibm.com/pc/register - http://www.ibm.com/pc/support POST When - IBM 867372X | User Manual - Page 30
problem (more than one beep sounds), an error message appears on your screen. See "Beep symptoms" on page 63 and "POST error codes" on page 69 for more information. Error logs A POST error log is available when an optional service the instructions on is supported and Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 31
on the IBM Enhanced Diagnostics CD. These programs are the primary method of testing the major components of your server. Diagnostic error messages indicate that a problem exists; they are not intended to be used to identify a failing part. Troubleshooting and servicing of complex problems that are - IBM 867372X | User Manual - Page 32
when a possible problem is reported during Web at http://www.ibm.com/pc/support. Note: When using IBM Enhanced Diagnostics using the CD, do the following: 1. Turn off your server and any peripheral devices. 22 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 33
the IBM Enhanced Diagnostics CD in the CD-ROM drive. The diagnostics will load. Follow the instructions on the screen to run the diagnostics. When the tests have completed, you can view the Test Log by selecting Utility from the top of the screen. If the hardware checks out OK but the problem - IBM 867372X | User Manual - Page 34
View Test Log from the list that appears; then, follow the instructions on the screen. 6. You can save the test log to a http://www.ibm.com/pc/support, click IBM Server Support, and make the selections for your server. v Contact your IBM service representative. The Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 35
The following illustration shows the location of the Flash boot block recovery jumper on the system board. System fan 3 (HFAN3) Boot block recovery jumper (JP4) ASR (JP3) CMOS (JP2) System fan 4 (HFAN4) System fan 1 System fan 2 (SYSFAN1) (SYSFAN2) Note: The Automatic Server Restart (ASR) - IBM 867372X | User Manual - Page 36
the power subsystem to shut down because of an overcurrent condition. A general procedure for troubleshooting power problems is as follows: 1. Turn off the server and disconnect all ac power cords. " on page 77). 26 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 37
see page 77). Troubleshooting the Ethernet controller This section provides troubleshooting information for problems that might occur with . v Determine whether the hub supports auto-negotiation. If it does not, try configuring the integrated Ethernet controller manually to match the speed and duplex - IBM 867372X | User Manual - Page 38
Table 3. Ethernet troubleshooting chart Ethernet controller problem FRU/actions The server stops running when loading device drivers. be made available at the IBM Support Web site at http://www.ibm.com/pc/support. 28 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 39
a small Phillips screwdriver available. v For a list of supported options for your server, go to http://www.ibm.com/pc/compat/ on the World Wide Web. System that comes with the rack. v You have followed the cabling instructions that come with optional adapters. v You have replaced a failed fan - IBM 867372X | User Manual - Page 40
screws Air baffle Heat sink Microprocessor DIMM Heat sink retaining clips System board CD-ROM drive Diskette drive Hard disk drive (some models) Adapter-support bracket SCSI adapter (some models) Fans Power supply 30 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 41
installed in PCI-X slot 2. The following illustration shows the location of the PCI-X slot 1 connector on the riser card, which is attached to the adapter-support bracket. PCI-X slot 1 (PCI1) 64-bit, 3.3 V, 66/100/133 MHz Chapter 4. Customer replaceable units 31 - IBM 867372X | User Manual - Page 42
ports and connectors" on page 45. Serial (CN19) Ethernet 2 (CN17) Ethernet 1 (CN18) Video (CN20) Mouse (JK2) Keyboard (JK1) 32 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 43
System-board switches and jumpers The following illustration identifies the switches and jumpers on the system board. System fan 3 (HFAN3) Boot block recovery jumper (JP4) ASR (JP3) CMOS (JP2) System fan 4 (HFAN4) System fan 1 System fan 2 (SYSFAN1) (SYSFAN2) Notes: 1. The Automatic Server - IBM 867372X | User Manual - Page 44
the server for extended periods of time (over 30 minutes) with the cover removed might damage server components. 34 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 45
-X) adapter slots. PCI-X slot 1 is located on the riser card that is attached to the adapter-support bracket. PCI-X slot 2 is located on the system board. You must first remove the adapter-support bracket to access the PCI-X slot 1 connector. The following illustrations show the location of the PCI - IBM 867372X | User Manual - Page 46
comes with the adapter and follow those instructions in addition to the instructions in this chapter. v If you need use this technique to install PCI-X adapters that currently do not support sharing of PCI-X interrupts. v The system scans PCI-X slots Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 47
v If the server is a SCSI model server, the server will have a SCSI adapter installed in PCI-X slot 2. Note: You can use the Configuration/Setup Utility program to change the boot precedence for your server. Select Start Options from the Configuration/Setup Utility program main menu. Chapter 4. - IBM 867372X | User Manual - Page 48
the adapter from the static-protective package. Avoid touching the components and gold-edge connectors on the adapter. 38 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 49
board or the adapter. PCI-X slot 1 connector Riser card Adapter-support bracket PCI-X slot 2 connector Adapter Adapter PCI-X riser card connector PCI-X slot 2, continue with the next step. If you removed the adapter-support bracket, reinstall it now. Make sure the riser card is fully seated into - IBM 867372X | User Manual - Page 50
Read "Safety information" on page 87 and the "Installation guidelines" on page 29. 3. Check the instructions that come with the drive for more information about installing your drive. Notes: a. If you are server. 40 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 51
xSeries 305 server supports 256 MB, 512 MB, and 1 GB DIMMS. Your ® server supports a maximum of 4 GB of system memory. See the ServerProven list at http://www.ibm.com/pc/compat program and select Save Settings. See the User's Guide on the IBM Documentation CD for more information about using the - IBM 867372X | User Manual - Page 52
all the cables, for certain options, run the Configuration/Setup Utility program. Follow the instructions in this section. Attention: To maintain proper cooling and airflow, install the server cover sliding it forward. 42 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 53
the server in the rack. See the Rack installation instructions included with your server documentation for instructions. 4. Connect the power cord and all external cables new configuration information. See the User's Guide on the IBM xSeries Documentation CD for information about the Configuration - IBM 867372X | User Manual - Page 54
within Canada. Outside the U.S. and Canada, call your IBM reseller or IBM marketing representative. Note: After you replace the battery, you page 87, and follow any special handling and installation instructions supplied with the replacement battery. 2. Turn off the Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 55
6. Reinstall the server cover, see "Installing the cover" on page 42. 7. Reconnect the external cables and power cords; then, turn on the peripheral devices and the server. 8. Start the Configuration/Setup Utility program and set configuration parameters. v Set the system date and time and the power - IBM 867372X | User Manual - Page 56
the keyboard connector, the USB ports, and devices will be disabled during the power-on self-test (POST). 46 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 57
Auxiliary-device (pointing device) connector There is one auxiliary-device connector that supports a mouse or other pointing device located on the rear of the server the rear of the server (see the User's Guide on the IBM xSeries Documentation CD for information about the Configuration/Setup - IBM 867372X | User Manual - Page 58
your Ethernet controllers, go to the IBM Support Web site at http://www.ibm.com/pc/support and navigate to the area for your instructions. It might be easier for you to route cables before you install certain options. 48 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 59
3. Cable identifiers are printed on the cables that come with your server and options. Use these identifiers to connect the cables to the correct connectors. For example, the hard disk drive cables are labeled "HDD option." Chapter 4. Customer replaceable units 49 - IBM 867372X | User Manual - Page 60
50 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 61
describes how to remove and replace field replacable units (FRUs). Important: These procedures are intended only for trained customer service representatives who are familiar with IBM xSeries products. See the parts listing in "Server" on page 80 to determine whether the component being replaced is - IBM 867372X | User Manual - Page 62
syringe. 6. Install the heat sink onto the microprocessor as described in "Removing and replacing a microprocessor" on page 53. 52 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 63
release lever of the microprocessor socket. 7. Pull the microprocessor out of the socket. To install a microprocessor, reverse the previous steps. Chapter 5. Removing and installing FRUs (service only) 53 - IBM 867372X | User Manual - Page 64
and lift the retention module away from the system board. To install a retention module, reverse the previous steps. 54 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 65
87. 1. Turn off the server and peripheral devices. 2. Disconnect the power cord; then, disconnect all external cables from the server. Chapter 5. Removing and installing FRUs (service only) 55 - IBM 867372X | User Manual - Page 66
peripheral devices. 2. Disconnect the power cord; then, disconnect all external cables from the server. 3. Remove the server cover. 56 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 67
of the server; then, pull the connector out of the chassis. To install the power supply, reverse the previous steps. Chapter 5. Removing and installing FRUs (service only) 57 - IBM 867372X | User Manual - Page 68
the server front. 5. Store the bezel in a safe place. To replace the front bezel, reverse the previous steps. 58 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 69
pull the PCI riser card away from the expansion-slot cover. To install a PCI riser card, reverse the previous steps. Chapter 5. Removing and installing FRUs (service only) 59 - IBM 867372X | User Manual - Page 70
the cover″. 5. Connect the external cables and power cords; then, turn on the peripheral devices and the server. 60 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 71
the server. 6. Gently pull the blower out and away from the server. To install the blower, reverse the previous steps. Chapter 5. Removing and installing FRUs (service only) 61 - IBM 867372X | User Manual - Page 72
of the chassis, lift it out of the server. To install the air baffle, reverse the previous steps. 62 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 73
xSeries 305 servers. Notes: 1. Check the configuration before you replace a FRU. Configuration problems can cause false errors and symptoms. 2. For IBM devices not supported by this index, refer to the manual for that device. 3. Always start with "General checkout" on page 17. The symptom-to - IBM 867372X | User Manual - Page 74
failed) v System board 3-1-2 (Interval timer channel 2 failed) v System board 3-1-3 (RAM test failed above address OFFFFH) 1. DIMM 2. System board 64 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 75
ac power No beep and no video FRU/Action v System board v See ″Information panel system error LED″. 1. Check the power cord. 2. Power supply. v See "Undetermined problems" on page 77. Diagnostic error codes Note: In the following error codes, if XXX is 000, 195, or 197,do not replace a FRU. The - IBM 867372X | User Manual - Page 76
in PCI slot S replacing a FRU. S = number of failing PCI slot; NN = SCSI ID of failing hard disk drive.) 66 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 77
Adapter in slot S is not configured properly. Obtain the basic and extended configuration status and refer to the ServeRAID Hardware Maintenance Manual for more information. 2. Cable. 3. Adapter. 075-XXX-000 (Failed Power v Power supply Supply test) 089-XXX-001 (Failed Microprocessor test - IBM 867372X | User Manual - Page 78
v System board v System board v System board v RAID controller adapter 1. System management adapter, if installed 2. System board v System board 68 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 79
start. v Be sure the server is supported; all eServers with a startable (bootable) CD-ROM drive are supported. v If the startup (boot) sequence settings 80 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 062 (Three consecutive boot - IBM 867372X | User Manual - Page 80
to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 101, 102, 106 3. System board. 175 (Hardware error) v System board 176 (Computer cover or cable cover was 1. Run the Configuration/Setup Utility program Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 81
Run the Configuration/Setup Utility program. 2. System board. 1301(LED panel cable disconnected) 1. LED cable assembly. 2. System board. 1600 (The service processor is not functioning) Complete the following steps before replacing a FRU: 1. Ensure that a jumper is not installed on J28. 2. Remove - IBM 867372X | User Manual - Page 82
See "Server" on page 80 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 1762 (Hard disk configuration error - IDE only) Failing adapter. 3. System board. 72 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 83
) error procedures Use the ISPR error procedures to help you solve ServeRAID problems. A complete list of error codes is listed at "ServeRAID error codes disk drive backplane, see the chapter of this publication that concerns service replaceable units. EF10 (Default ISPR) 1. No ISPR error present. - IBM 867372X | User Manual - Page 84
. Note: SCSI channel termination details, if any, appear elsewhere in this publication. d. Check for proper backplane jumper configuration. 74 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 85
2a and reboot each time to determine which drive is causing the problem. d. Replace hard disk drive cable attached to channel identified in step page 80 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 1xxx (Microcode checksum error) v - IBM 867372X | User Manual - Page 86
be replaced by a field service technician. Error code/symptom 2. Verify that the ServeRAID-5i controller is supported in this server. 3. ServeRAID-5i controller. 4. the specific on page 73. Follow those instructions before channel or channels that cause the error Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 87
service problems are suspected: 1. Turn off the computer. 2. Be sure the system is cabled correctly. 3. Remove or disconnect the following (one at a time) until you find the failure (power-on the computer and reconfigure each time). v Any external devices v Modem, printer, mouse, or non-IBM - IBM 867372X | User Manual - Page 88
78 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 89
Chapter 7. Parts listing xSeries 305 Type 8673 This parts listing supports the xSeries 305 Type 8673. 1 12 11 10 2 3 4 9 8 5 6 7 © Copyright IBM Corp. 2002 79 - IBM 867372X | User Manual - Page 90
5 6 7 8 9 10 11 11 11 12 Note: Field replaceable units (FRUs) must be serviced only by qualified field service technicians. Customer replaceable units (CRUs) can be replaced by the customer. Server (xSeries 305, Type 8673 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 91
, M 4x5 pan (4) v Spring, CD (2) v Spring, diskette drive (2) Power cord; see "Power cords" on page 82. (all models) SCSI adapter (models 13x, 23x) System service label (all models) Thermal grease kit (all models) FRU No. 49P2771 CRU/FRU FRU 06P2215 49P2769 59P4740 CRU CRU FRU FRU Keyboard CRUs - IBM 867372X | User Manual - Page 92
37L2585 37L2587 37L0913 Power cords For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the , Pakistan, South Africa, Sri Lanka 82 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 93
IBM power cord part number 14F0033 14F0051 14F0069 14F0087 1838574 6952300 Used in these countries and regions Antigua, Bahrain, Brunei, Channel Islands, China (Hong Kong S.A.R.), Cyprus, - IBM 867372X | User Manual - Page 94
84 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 95
the IBM Support Web site at http://www.ibm.com/pc/support/ to check for technical information, hints, tips, and new device drivers. v Use an IBM discussion forum on the IBM Web site to ask questions. You can solve many problems without outside assistance by following the troubleshooting procedures - IBM 867372X | User Manual - Page 96
/ for support telephone numbers. In the U.S. and Canada, hardware service and support is available 24 hours a day, 7 days a week. In the U.K., these services are available Monday through Friday, from 9 a.m. to 6 p.m. 86 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 97
, or that are familiar with the computers, functions, terminology, and service information provided in this manual. Safety information The following section contains the safety information that you need to be familiar with before servicing an IBM computer. General safety Follow these rules to - IBM 867372X | User Manual - Page 98
and machine frames. Observe the special safety precautions when you work with very high voltages; these instructions are in the safety sections of maintenance information. Use extreme care when measuring high voltages. 88 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 99
items installed to protect users and service personnel from injury. This guide addresses only those items. However to attachment of non-IBM features or options not covered by this inspection guide. If any unsafe conditions the computer. Disconnect the power cord. 3. Check the power cord for: - IBM 867372X | User Manual - Page 100
for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations. 6. Check list, to provide protection that meets the specific service requirement. Note: The use of a grounding computers. 90 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 101
grounding of the computer is required for v Spanish Important: All caution and danger statements in this IBM documentation begin with a number. This number is used to covers, unless instructed otherwise in the installation and configuration procedures. Appendix B. Related service information 91 - IBM 867372X | User Manual - Page 102
Statement 2 CAUTION: When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or adjustments Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 103
power source. 2 1 v Statement 10 CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. Appendix B. Related service information 93 - IBM 867372X | User Manual - Page 104
Importante: Todas as instruções de cuidado e perigo da IBM documentation começam com um número. Este número é utilizado para fazer referência cruzada de sinal dos conectores. 4. Remova todos os cabos dos dispositivos. 94 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 105
(011) 889-8986, para obter informações sobre como enviar a bateria pelo correio para a IBM. Instrução 3 PRECAUCIÓN: Quando produtos a laser (unidades de CD-ROM, unidades de DVD, ou com instrumentos íticos, e evite exposição direta ao raio. Instrução 4 Appendix B. Related service information 95 - IBM 867372X | User Manual - Page 106
: Instrução 10 CUIDADO: Não coloque nenhum objeto com peso superior a 82 kg (180 lbs.) sobre dispositivos montados em rack. 96 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 107
Appendix B. Related service information 97 - IBM 867372X | User Manual - Page 108
98 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 109
Appendix B. Related service information 99 - IBM 867372X | User Manual - Page 110
100 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 111
Appendix B. Related service information 101 - IBM 867372X | User Manual - Page 112
102 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 113
Appendix B. Related service information 103 - IBM 867372X | User Manual - Page 114
104 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 115
indiquées dans la bibliothèque IBM documentation sont précédées d'un num réseaux, aux systèmes de télécommunication et aux modems (sauf instruction contraire mentionnée dans les procédures d'installation et de configuration). v les unités sous tension. Appendix B. Related service information 105 - IBM 867372X | User Manual - Page 116
la pile au lithium usagée par une pile de référence identique exclusivement - voir la référence IBM - ou par une pile équivalente recommandée par le fabricant. Si votre système est dot directe au rayon. Notice n° 4 106 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 117
prise de courant. 2 1 Notice n° 10 ATTENTION: Ne posez pas d'objet dont le poids dépasse 82 kg sur les unités montées en armoire. Appendix B. Related service information 107 - IBM 867372X | User Manual - Page 118
Wichtig: Alle Sicherheitshinweise in dieser IBM documentation beginnen mit einer Nummer. Diese Nummer verweist auf einen englischen Sicherheitshinweis mit den ü Anschlußbuchsen lösen. 4. Alle Kabel von Einheiten lösen. 108 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 119
2 ACHTUNG: Eine verbrauchte Batterie nur durch eine Batterie mit der IBM Teilenummer 33F8354 oder durch eine vom Hersteller empfohlene Batterie ersetzen. Wenn Ihr direkt mit optischen Instrumenten betrachten und den Strahlungsbereich meiden. Hinweis 4 Appendix B. Related service information 109 - IBM 867372X | User Manual - Page 120
herausgezogen wurden. 2 1 Hinweis 10 ACHTUNG: Keine Gegenstände, die mehr als 82 kg wiegen, auf Rack-Einheiten ablegen. 110 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 121
Tutti gli avvisi di attenzione e di pericolo riportati nella pubblicazione IBM documentation iniziano con un numero. Questo numero viene utilizzato per confrontare . prese elettriche. 4. Rimuovere tutti i cavi dalle unità. 5. ACCENDERE le unità. Appendix B. Related service information 111 - IBM 867372X | User Manual - Page 122
2 ATTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo una batteria IBM con numero parte 33F8354 o batterie dello stesso tipo o di tipo equivalente consigliate esposizione diretta al fascio. Avviso 4 112 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 123
sorgente di alimentazione. 2 1 Avviso 10 ATTENZIONE: Non poggiare oggetti che pesano più di 82 kg sulla parte superiore delle unità montate in rack. Appendix B. Related service information 113 - IBM 867372X | User Manual - Page 124
114 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 125
Appendix B. Related service information 115 - IBM 867372X | User Manual - Page 126
116 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 127
Importante: Todas las declaraciones de precauciín de esta IBM documentation empiezan con un número. Dicho número se emplea para establecer una referencia cruzada 4. Retire los cables de los dispositivos. toma de alimentaciín. 5. ENCIENDA el dispositivo. Appendix B. Related service information 117 - IBM 867372X | User Manual - Page 128
Cuando desee sustituir la batería de litio, utilice únicamente el número de pieza 33F8354 de IBM o cualquier tipo de batería equivalente que recomiende el fabricante. Si el sistema tiene un exposiciín directa al rayo. 118 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 129
de alimentaciín. 2 1 Declaración 10 PRECAUCIÓN: No coloque ningún objeto que pese más de 82 kg (180 libras) encima de los dispositivos montados en bastidor. Appendix B. Related service information 119 - IBM 867372X | User Manual - Page 130
120 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 131
right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not - IBM 867372X | User Manual - Page 132
company, product, or service names may be trademarks or service marks of others. supported drives available from IBM. Maximum memory may require replacement of the standard memory with an optional memory module. 122 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 133
IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM. Some software may differ from its retail version (if available), and may not include user manuals installed and used in accordance with the instruction manual, may cause harmful interference to radio - IBM 867372X | User Manual - Page 134
requirements resulting from a nonrecommended modification of the product, including the fitting of non-IBM option cards. This product has been tested and found to comply with the limits for Interference (VCCI) statement 124 xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide - IBM 867372X | User Manual - Page 135
- IBM 867372X | User Manual - Page 136
Part Number: 48P9906 (1P) P/N: 48P9906
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
 |
 |
xSeries 305 Type 8673
Hardware Maintenance Manual and Troubleshooting
Guide
E
Rserver
±²³